llvm-svn: 196544

@skipIfRemote is used to decorate test cases that don't make sense to run remotely.

@skipIfRemoteDueToDeadlock indicates these tests need to be looked at and currently deadlock the running of the test suite when run on remote systems. These issues should be fixed soon.

llvm-svn: 196543

llvm-svn: 196542

llvm-svn: 196541

llvm-svn: 196540

Test is platform independent, but I don't want to force vector-width, or
that could spoil the pragma test.

llvm-svn: 196539

llvm-svn: 196538

The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.

This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.

The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.

Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.

llvm-svn: 196537

llvm-svn: 196536

llvm-svn: 196535

llvm-svn: 196534

llvm-svn: 196533

llvm-svn: 196532

category is declared in category's primary
class's super class. Because the super class is
expected to implemented the method. // rdar://15580969

llvm-svn: 196531

llvm-svn: 196530

Windows friendly than the colon.

llvm-svn: 196529

The typedef is used inside the DEBUG(), and apparently can't be moved
inside of it.

llvm-svn: 196528

I happened to notice this while trying to write a test for an iOS simulator
target. I suspect we just missed this when we added separate "macosx" and "ios"
triples instead of the generic "darwin" OS.

llvm-svn: 196527

Unused typedefs and unused variables.

llvm-svn: 196526

CC: lldb-commits

Differential Revision: http://llvm-reviews.chandlerc.com/D2337

llvm-svn: 196525

There is no reason to use std::deque here over std::vector. Thus given the
performance differences inbetween the two it makes sense to change deque to
vector.

llvm-svn: 196524

llvm-svn: 196523

We use CSEBlocks to initialize a worklist:

SmallVector<BasicBlock *, 8> CSEWorkList(CSEBlocks.begin(), CSEBlocks.end());

so it must have a deterministic order.

llvm-svn: 196520

llvm-svn: 196519

llvm-svn: 196518

This allows a target to use MI-Sched as an in-order scheduler that
will model strict resource conflicts without defining a processor
itinerary. Instead, the target can now use the new per-operand machine
model and define in-order resources with BufferSize=0. For example,
this would allow restricting the type of operations that can be formed
into a dispatch group. (Normally NumMicroOps is sufficient to enforce
dispatch groups).

If the intent is to model latency in in-order pipeline, as opposed to
resource conflicts, then a resource with BufferSize=1 should be
defined instead.

This feature is only casually tested as there are no in-tree targets
using it yet. However, Hal will be experimenting with POWER7.

llvm-svn: 196517

The per-operand machine model allows the target to define "unbuffered"
processor resources. This change is a quick, cheap way to model stalls
caused by the latency of operations that use such resources. This only
applies when the processor's micro-op buffer size is non-zero
(Out-of-Order). We can't precisely model in-order stalls during
out-of-order execution, but this is an easy and effective
heuristic. It benefits cortex-a9 scheduling when using the new
machine model, which is not yet on by default.

MI-Sched for armv7 was evaluated on Swift (and only not enabled because
of a performance bug related to predication). However, we never
evaluated Cortex-A9 performance on MI-Sched in its current form. This
change adds MI-Sched functionality to reach performance goals on
A9. The only remaining change is to allow MI-Sched to run as a PostRA
pass.

I evaluated performance using a set of options to estimate the performance impact once MI sched is default on armv7:
-mcpu=cortex-a9 -disable-post-ra -misched-bench -scheditins=false

For a simple saxpy loop I see a 1.7x speedup. Here are the llvm-testsuite results:
(min run time over 2 runs, filtering tiny changes)

Speedups:
| Benchmarks/BenchmarkGame/recursive         |  52.39% |
| Benchmarks/VersaBench/beamformer           |  20.80% |
| Benchmarks/Misc/pi                         |  19.97% |
| Benchmarks/Misc/mandel-2                   |  19.95% |
| SPEC/CFP2000/188.ammp                      |  18.72% |
| Benchmarks/McCat/08-main/main              |  18.58% |
| Benchmarks/Misc-C++/Large/sphereflake      |  18.46% |
| Benchmarks/Olden/power                     |  17.11% |
| Benchmarks/Misc-C++/mandel-text            |  16.47% |
| Benchmarks/Misc/oourafft                   |  15.94% |
| Benchmarks/Misc/flops-7                    |  14.99% |
| Benchmarks/FreeBench/distray               |  14.26% |
| SPEC/CFP2006/470.lbm                       |  14.00% |
| mediabench/mpeg2/mpeg2dec/mpeg2decode      |  12.28% |
| Benchmarks/SmallPT/smallpt                 |  10.36% |
| Benchmarks/Misc-C++/Large/ray              |   8.97% |
| Benchmarks/Misc/fp-convert                 |   8.75% |
| Benchmarks/Olden/perimeter                 |   7.10% |
| Benchmarks/Bullet/bullet                   |   7.03% |
| Benchmarks/Misc/mandel                     |   6.75% |
| Benchmarks/Olden/voronoi                   |   6.26% |
| Benchmarks/Misc/flops-8                    |   5.77% |
| Benchmarks/Misc/matmul_f64_4x4             |   5.19% |
| Benchmarks/MiBench/security-rijndael       |   5.15% |
| Benchmarks/Misc/flops-6                    |   5.10% |
| Benchmarks/Olden/tsp                       |   4.46% |
| Benchmarks/MiBench/consumer-lame           |   4.28% |
| Benchmarks/Misc/flops-5                    |   4.27% |
| Benchmarks/mafft/pairlocalalign            |   4.19% |
| Benchmarks/Misc/himenobmtxpa               |   4.07% |
| Benchmarks/Misc/lowercase                  |   4.06% |
| SPEC/CFP2006/433.milc                      |   3.99% |
| Benchmarks/tramp3d-v4                      |   3.79% |
| Benchmarks/FreeBench/pifft                 |   3.66% |
| Benchmarks/Ptrdist/ks                      |   3.21% |
| Benchmarks/Adobe-C++/loop_unroll           |   3.12% |
| SPEC/CINT2000/175.vpr                      |   3.12% |
| Benchmarks/nbench                          |   2.98% |
| SPEC/CFP2000/183.equake                    |   2.91% |
| Benchmarks/Misc/perlin                     |   2.85% |
| Benchmarks/Misc/flops-1                    |   2.82% |
| Benchmarks/Misc-C++-EH/spirit              |   2.80% |
| Benchmarks/Misc/flops-2                    |   2.77% |
| Benchmarks/NPB-serial/is                   |   2.42% |
| Benchmarks/ASC_Sequoia/CrystalMk           |   2.33% |
| Benchmarks/BenchmarkGame/n-body            |   2.28% |
| Benchmarks/SciMark2-C/scimark2             |   2.27% |
| Benchmarks/Olden/bh                        |   2.03% |
| skidmarks10/skidmarks                      |   1.81% |
| Benchmarks/Misc/flops                      |   1.72% |

Slowdowns:
| Benchmarks/llubenchmark/llu                | -14.14% |
| Benchmarks/Polybench/stencils/seidel-2d    |  -5.67% |
| Benchmarks/Adobe-C++/functionobjects       |  -5.25% |
| Benchmarks/Misc-C++/oopack_v1p8            |  -5.00% |
| Benchmarks/Shootout/hash                   |  -2.35% |
| Benchmarks/Prolangs-C++/ocean              |  -2.01% |
| Benchmarks/Polybench/medley/floyd-warshall |  -1.98% |
| Polybench/linear-algebra/kernels/3mm       |  -1.95% |
| Benchmarks/McCat/09-vor/vor                |  -1.68% |

llvm-svn: 196516

llvm-svn: 196515

llvm-svn: 196514

llvm-svn: 196513

as the location for grabbing clang-format.exe, and also output the .vsix here.

This allows us to find clang-format.exe when building from a MSVC Solution.

llvm-svn: 196512

No practical difference in this case and would return 1 either way, but this is
more self-explanatory.

llvm-svn: 196511

llvm-svn: 196510

Should fix the msan and valgrind bots.

llvm-svn: 196509

We were creating external uses for scalar values in MustGather entries that also
had a ScalarToTreeEntry (they also are present in a vectorized tuple). This
meant we would keep a value 'alive' as a scalar and vectorized causing havoc.
This is not necessary because when we create a MustGather vector we explicitly
create external uses entries for the insertelement instructions of the
MustGather vector elements.

Fixes PR18129.

radar://15582184

llvm-svn: 196508

[tsan] fix PR18146: sometimes a variable written into vptr could have an integer type (after other optimizations)

llvm-svn: 196507

llvm-svn: 196506

llvm-svn: 196505

Currently we do not de-duplicate library files specified by /defaultlib option.
As a result, the same files are added multiple times to the input graph. In
particular, some popular files, such as kernel32.lib or oldnames.lib, are added
more than 10 times during linking of LLD. That makes the linker slower, as it
needs to parse the same file again and again.

This patch solves the issue by de-duplicating. The same file will be added only
once to the input graph. This patch improved the LLD linking time from 10.5
seconds to 7.7 seconds on my 4-core Core i7 Macbook Pro.

llvm-svn: 196504

llvm-svn: 196503