Summary:
Update GCC test suite failure expectations as we add -O0 to the bare tests in
WebAssembly waterfall. There are still several untriaged lld failures.

Reviewers: sbc100, jgravelle-google, dschuff

Reviewed By: dschuff

Subscribers: jfb

Differential Revision: https://reviews.llvm.org/D37100

llvm-svn: 311691

llvm-svn: 311690

This fixes a warning when there are zero defined predicates and also fixes an
unnoticed bug where the first predicate in the table was unusable.

llvm-svn: 311684

Discovered due to a goofy git setup, the test system-headerline-directive.c 
(and a few others) failed because the token-consumption will consume only the 
'\r' in CRLF, making the preprocessor's printed value give the wrong line number 
when returning from an include. For example:

(line 1):#include <noline.h>\r\n

The "file exit" code causes the printer to try to print the 'returned to the 
main file' line. It looks up what the current line number is. However, since the 
current 'token' is the '\n' (since only the \r was consumed), it will give the 
line number as '1", not '2'. This results in a few failed tests, but more 
importantly, results in error messages being incorrect when compiling a 
previously preprocessed file.

Differential Revision: https://reviews.llvm.org/D37079

llvm-svn: 311683

Fixes https://bugs.llvm.org/show_bug.cgi?id=34311

llvm-svn: 311682

Before this patch, lld printed out something like

  error: -O: number expected, but got

After this patch, it prints out the same error message like this:

  error: -O: number expected, but got ''

Fixes https://bugs.llvm.org/show_bug.cgi?id=34311

llvm-svn: 311681

Revert "[ubsan] PR34266: When sanitizing the 'this' value for a member function that happens to be a lambda call operator, use the lambda's 'this' pointer, not the captured enclosing 'this' pointer (if any)."

This reverts commit r311589 because of bot breakage.
http://green.lab.llvm.org/green/job/clang-stage2-cmake-RgSan_check/4115/consoleFull#15752874848254eaf0-7326-4999-85b0-388101f2d404.

llvm-svn: 311680

but while I was at it I converted the example to use
properties, since that's much nicer looking.

llvm-svn: 311679

llvm-svn: 311675

The buildbots don't seem to like it.

llvm-svn: 311674

llvm-svn: 311673

Summary:
This recommits https://reviews.llvm.org/D36956 with an update to the added test
case to not use raw string literals, since this makes gcc unhappy.

Reviewers: djasper

Reviewed By: djasper

Subscribers: cfe-commits, klimek

Differential Revision: https://reviews.llvm.org/D37109

llvm-svn: 311672

In patch r205628 using abs.[ds] instruction is forced, as they should behave
in accordance with flags Has2008 and ABS2008. Unfortunately for revisions
prior mips32r6 and mips64r6, abs.[ds] is not generating correct result when
working with NaNs. To generate a sequence which always produce a correct
result but also to allow user more control on how his code is compiled,
option -mabs is added where user can choose legacy or 2008.
By default legacy mode is used on revisions prior R6. Mips32r6 and mips64r6
use abs2008 mode by default.

Patch by Aleksandar Beserminji

Differential Revision: https://reviews.llvm.org/D35982

llvm-svn: 311669

Add the ARC backend as an experimental target to lib/Target.
Reviewed at: https://reviews.llvm.org/D36331

llvm-svn: 311667

Summary:
This is a follow-up of https://reviews.llvm.org/D37105, where a slight refactoring
of the constructors of AsmRewrite is proposed.

Reviewers: coby

Reviewed By: coby

Differential Revision: https://reviews.llvm.org/D37110

llvm-svn: 311666

llvm-svn: 311665

llvm-svn: 311664

Whether a partial write is tautological/unsatisfiable not only
depends on the access domain, but also on the domain covered
by its node in the AST.

In the example below, there are two instances of Stmt_cond_false. It may have a partial write access that is not executed in instance Stmt_cond_false(0).

      for (int c0 = 0; c0 < tmp5; c0 += 1) {
        Stmt_for_body344(c0);
        if (tmp5 >= c0 + 2)
          Stmt_cond_false(c0);
        Stmt_cond_end(c0);
      }
      if (tmp5 <= 0) {
        Stmt_for_body344(0);
        Stmt_cond_false(0);
        Stmt_cond_end(0);
      }

Isl cannot derive a subscript for an array element that is never accessed.
This caused an error in that no subscript expression has been generated
in IslNodeBuilder::createNewAccesses, but BlockGenerator expected one
to exist because there is an execution of that write, just not in that
ast node.

Fixed by instead of determining whether the access domain is empty,
inspect whether isl generated a constant "false" ast expression in
the current ast node.

This should fix a compiler crash of the aosp buildbot.

llvm-svn: 311663

Instead of loading 0 from a constant pool, it's of course much better to
materialize it using an fmov and the zero register.

Thanks to Ahmed Bougacha for the suggestion.

Differential Revision: https://reviews.llvm.org/D37102

llvm-svn: 311662

We can reuse this code with other div/rem transforms as shown in:
https://reviews.llvm.org/D31037 
https://bugs.llvm.org/show_bug.cgi?id=31028

llvm-svn: 311661

Differential Revision: https://reviews.llvm.org/D37106

llvm-svn: 311660

Differential Revision: https://reviews.llvm.org/D37081

llvm-svn: 311659

llvm-svn: 311658

rL311639 created X86AsmParser a dependency in X86AsmPrinter, which broke builds
this fix adds the necessary dep

llvm-svn: 311657

This should fix
http://green.lab.llvm.org/green/job/clang-stage1-cmake-RA-incremental_build/41578/

llvm-svn: 311656

This commit adds the base AST source selection component to the refactoring
library. AST selection is represented using a tree of SelectedASTNode values.
Each selected node gets its own selection kind, which can actually be None even
in the middle of tree (e.g. statement in a macro whose child is in a macro
argument). The initial version constructs a "raw" selection tree, without
applying filters and canonicalisation operations to the nodes.

Differential Revision: https://reviews.llvm.org/D35012

llvm-svn: 311655

A followup of rL311136.

llvm-svn: 311654

Summary:
CodeGen/ms-inline-asm.c test triggers msan use-of-uninitialized-value here:
llvm/lib/MC/MCParser/AsmParser.cpp:5629:7

Reviewers: bkramer, coby

Differential Revision: https://reviews.llvm.org/D37105

llvm-svn: 311653

Reviewers: alexfh

Reviewed By: alexfh

Subscribers: JDevlieghere, xazax.hun, cfe-commits

Differential Revision: https://reviews.llvm.org/D37066

llvm-svn: 311652

Having the actual type in the message helps a lot understanding warnings in templates ;)

+ fix a false negative for type aliases.

llvm-svn: 311651

The check (assuming positive stride) for validity of memmove should be
(a) the destination is at a lower address than the source, or
(b) the distance between the source and destination is greater than or
    equal the number of bytes copied.

For the second part it is sufficient to assume that the destination
is at a higher address, since the opposite case is covered by (a).
The distance calculation was previously done by subtracting the
pointers in the wrong order.

llvm-svn: 311650

ARMTargetLowering::isLegalAddressingMode can accept illegal addressing modes
for the Thumb1 target. This causes generation of redundant code and affects
performance.

This fixes PR34106: https://bugs.llvm.org/show_bug.cgi?id=34106

Differential Revision: https://reviews.llvm.org/D36467

llvm-svn: 311649

This is a stylistic change to make the function a little more readable.
Also add a debug print to show what instruction contains a use of a
function we don't understand in the kernel.

Differential Revision: https://reviews.llvm.org/D37058

llvm-svn: 311648

Summary:
We add the precise cache sizes and associativity for the following Intel
architectures:

  - Penry
  - Nehalem
  - Westmere
  - Sandy Bridge
  - Ivy Bridge
  - Haswell
  - Broadwell
  - Skylake
  - Kabylake

Polly uses since several months a performance model for BLAS computations that
derives optimal cache and register tile sizes from cache and latency
information (based on ideas from "Analytical Modeling Is Enough for High-Performance BLIS", by Tze Meng Low published at TOMS 2016).
While bootstrapping this model, these target values have been kept in Polly.
However, as our implementation is now rather mature, it seems time to teach
LLVM itself about cache sizes.

Interestingly, L1 and L2 cache sizes are pretty constant across
micro-architectures, hence a set of architecture specific default values
seems like a good start. They can be expanded to more target specific values,
in case certain newer architectures require different values. For now a set
of Intel architectures are provided.

Just as a little teaser, for a simple gemm kernel this model allows us to
improve performance from 1.2s to 0.27s. For gemm kernels with less optimal
memory layouts even larger speedups can be reported.

Reviewers: Meinersbur, bollu, singam-sanjay, hfinkel, gareevroman, fhahn, sebpop, efriedma, asb

Reviewed By: fhahn, asb

Subscribers: lsaba, asb, pollydev, llvm-commits

Differential Revision: https://reviews.llvm.org/D37051

llvm-svn: 311647

This is a follow up patch of r311154 and introduces custom lowering of copysign
f16 to avoid promotions to single precision types when the subtarget supports
fullfp16.

Differential Revision: https://reviews.llvm.org/D36893

llvm-svn: 311646

Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not
for PatLeaf or PatFrag and only where the value does not need to be transformed
before being rendered into the instruction.

The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the
necessary target-supplied C++ for GlobalISel.

Depends on D36085

The previous commit was reverted for breaking the build but this appears to have
been the recurring problem on the Windows bots with tablegen not being re-run
when llvm-tblgen is changed but the .td's aren't. If it re-occurs then forcing a
build with clean=True should fix it but this string should do this in advance:
    Requires a clean build.

Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar

Reviewed By: rovka

Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits

Differential Revision: https://reviews.llvm.org/D36086

llvm-svn: 311645

This patch is intended to enable the use of basic double letter constraints used in GCC extended inline asm {Yi Y2 Yz Y0 Ym Yt}.
Supersedes D35204
Clang counterpart: D36371

Differential Revision: https://reviews.llvm.org/D36369

llvm-svn: 311644

This patch is intended to enable the use of basic double letter constraints used in GCC extended inline asm {Yi Y2 Yz Y0 Ym Yt}.
Supersedes D35205
llvm counterpart: D36369

Differential Revision: https://reviews.llvm.org/D36371

llvm-svn: 311643

Summary:
When reassociating an expression, do not drop the instruction's
original debug location in case the replacement location is
missing.

The debug location must at least not be dropped for inlinable
callsites of debug-info-bearing functions in debug-info-bearing
functions. Failing to do so would result in an "inlinable function "
"call in a function with debug info must have a !dbg location"
error in the verifier.

As preserving the original debug location is not expected
to result in overly jumpy debug line information, it is
preserved for all other cases too.

This fixes PR34231:
https://bugs.llvm.org/show_bug.cgi?id=34231

Original patch by David Stenberg

Reviewers: davide, craig.topper, mcrosier, dblaikie, aprantl

Reviewed By: davide, aprantl

Subscribers: aprantl

Differential Revision: https://reviews.llvm.org/D36865

llvm-svn: 311642

This reverts commit r311457. It reveals some dormant bugs in comment
reflowing, like breaking a single line jsdoc type annotation before a
parameter into multiple lines.

llvm-svn: 311641