Newer
Older
: end
_ACEOF
# If some macros were called several times there might be several times
# the same #defines, which is useless. Nevertheless, we may not want to
# sort them, since we want the *last* AC-DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\_ACEOF
s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
_ACEOF
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
# Write a limited-size here document to $tmp/defines.sed.
echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#define' lines.
echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/defines.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
rm -f conftest.defines
mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo ' fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
# Write a limited-size here document to $tmp/undefs.sed.
echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#undef'
echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
24057
24058
24059
24060
24061
24062
24063
24064
24065
24066
24067
24068
24069
24070
24071
24072
24073
24074
24075
24076
24077
24078
24079
24080
24081
24082
24083
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/undefs.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
rm -f conftest.undefs
mv conftest.tail conftest.undefs
done
rm -f conftest.undefs
cat >>$CONFIG_STATUS <<\_ACEOF
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
if test x"$ac_file" = x-; then
echo "/* Generated by configure. */" >$tmp/config.h
else
echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
fi
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
rm -f $ac_file
mv $tmp/config.h $ac_file
fi
else
cat $tmp/config.h
rm -f $tmp/config.h
fi
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
24136
24137
24138
24139
24140
24141
24142
24143
24144
24145
24146
24147
24148
24149
24150
24151
24152
24153
24154
24155
24156
#
# CONFIG_LINKS section.
#
for ac_file in : $CONFIG_LINKS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
{ echo "$as_me:$LINENO: linking $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: linking $srcdir/$ac_source to $ac_dest" >&6;}
if test ! -r $srcdir/$ac_source; then
{ { echo "$as_me:$LINENO: error: $srcdir/$ac_source: file not found" >&5
echo "$as_me: error: $srcdir/$ac_source: file not found" >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f $ac_dest
# Make relative symlinks.
ac_dest_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dest_dir"
else
as_dir="$ac_dest_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
24180
24181
24182
24183
24184
24185
24186
24187
24188
24189
24190
24191
24192
24193
24194
24195
24196
24197
24198
24199
24200
24201
24202
24203
24204
24205
24206
24207
24208
24209
24210
24211
24212
24213
24214
24215
24216
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dest_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dest_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dest_dir" != .; then
ac_dir_suffix=/`echo "$ac_dest_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Don't blindly perform a `cd "$ac_dest_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dest_dir" && cd $ac_builddir && pwd`
ac_abs_top_builddir=`cd "$ac_dest_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dest_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dest_dir" && cd $ac_top_srcdir && pwd`
24223
24224
24225
24226
24227
24228
24229
24230
24231
24232
24233
24234
24235
24236
24237
24238
24239
24240
case $srcdir in
[\\/$]* | ?:[\\/]* ) ac_rel_source=$srcdir/$ac_source ;;
*) ac_rel_source=$ac_top_builddir$srcdir/$ac_source ;;
esac
# Try a symlink, then a hard link, then a copy.
ln -s $ac_rel_source $ac_dest 2>/dev/null ||
ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
cp -p $srcdir/$ac_source $ac_dest ||
{ { echo "$as_me:$LINENO: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&2;}
{ (exit 1); exit 1; }; }
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
24253
24254
24255
24256
24257
24258
24259
24260
24261
24262
24263
24264
24265
24266
24267
24268
24269
24270
24271
24272
24273
24274
24275
24276
24277
24278
24279
24280
24281
24282
24283
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile Makefile ;;
Makefile.common ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile.common Makefile.common ;;
examples/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/examples/Makefile examples/Makefile ;;
lib/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Makefile lib/Makefile ;;
runtime/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/runtime/Makefile runtime/Makefile ;;
test/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile test/Makefile ;;
test/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile.tests test/Makefile.tests ;;
test/QMTest/llvm.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvm.py test/QMTest/llvm.py ;;
test/QMTest/llvmdb.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvmdb.py test/QMTest/llvmdb.py ;;
test/Programs/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile test/Programs/Makefile ;;
test/Programs/Makefile.programs ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile.programs test/Programs/Makefile.programs ;;
test/Programs/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile.tests test/Programs/Makefile.tests ;;
test/Programs/TEST.aa.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.aa.Makefile test/Programs/TEST.aa.Makefile ;;
test/Programs/TEST.dsgraph.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.report test/Programs/TEST.dsgraph.report ;;
test/Programs/TEST.aa.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.aa.report test/Programs/TEST.aa.report ;;
test/Programs/TEST.example.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.example.Makefile test/Programs/TEST.example.Makefile ;;
test/Programs/TEST.nightly.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.nightly.Makefile test/Programs/TEST.nightly.Makefile ;;
test/Programs/TEST.buildrepo.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.buildrepo.Makefile test/Programs/TEST.buildrepo.Makefile ;;
test/Programs/TEST.jit.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.jit.Makefile test/Programs/TEST.jit.Makefile ;;
test/Programs/TEST.nightly.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.nightly.report test/Programs/TEST.nightly.report ;;
test/Programs/TEST.dsgraph.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.Makefile test/Programs/TEST.dsgraph.Makefile ;;
test/Programs/TEST.jit.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.jit.report test/Programs/TEST.jit.report ;;
test/Programs/TEST.typesafe.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.typesafe.Makefile test/Programs/TEST.typesafe.Makefile ;;
test/Programs/TEST.dsgraph.gnuplot ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.gnuplot test/Programs/TEST.dsgraph.gnuplot ;;
test/Programs/TEST.vtl.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.vtl.Makefile test/Programs/TEST.vtl.Makefile ;;
test/Programs/External/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/Makefile test/Programs/External/Makefile ;;
test/Programs/External/SPEC/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile test/Programs/External/SPEC/Makefile ;;
John Criswell
committed
test/Programs/External/SPEC/Makefile.spec ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec test/Programs/External/SPEC/Makefile.spec ;;
Alkis Evlogimenos
committed
test/Programs/External/SPEC/Makefile.spec2000 ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec2000 test/Programs/External/SPEC/Makefile.spec2000 ;;
test/Programs/External/SPEC/Makefile.spec95 ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec95 test/Programs/External/SPEC/Makefile.spec95 ;;
test/Programs/MultiSource/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Makefile test/Programs/MultiSource/Makefile ;;
test/Programs/MultiSource/Makefile.multisrc ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Makefile.multisrc test/Programs/MultiSource/Makefile.multisrc ;;
test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in ;;
test/Programs/SingleSource/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/Makefile test/Programs/SingleSource/Makefile ;;
test/Programs/SingleSource/Makefile.singlesrc ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/Makefile.singlesrc test/Programs/SingleSource/Makefile.singlesrc ;;
Alkis Evlogimenos
committed
test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile ;;
tools/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/Makefile tools/Makefile ;;
utils/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/utils/Makefile utils/Makefile ;;
projects/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/projects/Makefile projects/Makefile ;;
esac
done
_ACEOF
24349
24350
24351
24352
24353
24354
24355
24356
24357
24358
24359
24360
24361
24362
24363
24364
24365
24366
24367
cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
John Criswell
committed
24379
24380
24381
24382
24383
24384
24385
24386
24387
24388
24389
24390
24391
24392
24393
24394
24395
24396
24397
24398
24399
24400
24401
24402
24403
24404
24405
24406
24407
24408
24409
24410
24411
24412
24413
24414
24415
24416
24417
24418
24419
24420
24421
24422
24423
24424
24425
24426
24427
24428
24429
24430
24431
24432
24433
24434
24435
#
# CONFIG_SUBDIRS section.
#
if test "$no_recursion" != yes; then
# Remove --cache-file and --srcdir arguments so they do not pile up.
ac_sub_configure_args=
ac_prev=
for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
*) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"
ac_popdir=`pwd`
for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
test -d $srcdir/$ac_dir || continue
{ echo "$as_me:$LINENO: configuring in $ac_dir" >&5
echo "$as_me: configuring in $ac_dir" >&6;}
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
John Criswell
committed
24440
24441
24442
24443
24444
24445
24446
24447
24448
24449
24450
24451
24452
24453
24454
24455
24456
24457
24458
24459
24460
24461
24462
24463
24464
24465
24466
24467
24468
24469
24470
24471
24472
24473
24474
24475
24476
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
# absolute.
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
John Criswell
committed
24483
24484
24485
24486
24487
24488
24489
24490
24491
24492
24493
24494
24495
24496
24497
24498
24499
24500
24501
24502
24503
24504
24505
cd $ac_dir
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_srcdir/configure.gnu; then
ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
elif test -f $ac_srcdir/configure; then
ac_sub_configure="$SHELL '$ac_srcdir/configure'"
elif test -f $ac_srcdir/configure.in; then
ac_sub_configure=$ac_configure
else
{ echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
ac_sub_configure=
fi
# The recursion is here.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
ac_sub_cache_file=$ac_top_builddir$cache_file ;;
John Criswell
committed
esac
{ echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
eval $ac_sub_configure $ac_sub_configure_args \
--cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
John Criswell
committed
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
{ (exit 1); exit 1; }; }
fi
cd $ac_popdir
done
fi
if test $llvmgccwarn = yes
then
{ echo "$as_me:$LINENO: WARNING: ***** llvm C/C++ front end was not found, or does not" >&5
echo "$as_me: WARNING: ***** llvm C/C++ front end was not found, or does not" >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** appear to be working." >&5
echo "$as_me: WARNING: ***** appear to be working." >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** " >&5
echo "$as_me: WARNING: ***** " >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** Please check configure's --with-llvmgccdir option." >&5
echo "$as_me: WARNING: ***** Please check configure's --with-llvmgccdir option." >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&5
echo "$as_me: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** but you should be able to build the llvm tools." >&5
echo "$as_me: WARNING: ***** but you should be able to build the llvm tools." >&2;}
fi