configure

  rm conftest.c
fi
fi
{ echo "$as_me:$LINENO: result: $llvm_cv_llvmgcc_sanity" >&5
echo "${ECHO_T}$llvm_cv_llvmgcc_sanity" >&6; }

if test "$llvm_cv_llvmgcc_sanity" = "yes" ; then
  { echo "$as_me:$LINENO: checking llvm-gcc component support" >&5
echo $ECHO_N "checking llvm-gcc component support... $ECHO_C" >&6; }
  llvmcc1path=`"$LLVMGCC" --print-prog-name=cc1`
  LLVMCC1=$llvmcc1path

  llvmcc1pluspath=`"$LLVMGCC" --print-prog-name=cc1plus`
  LLVMCC1PLUS=$llvmcc1pluspath

  llvmgccdir=`echo "$llvmcc1path" | sed 's,/libexec/.*,,'`
  LLVMGCCDIR=$llvmgccdir

  llvmgcclibexec=`echo "$llvmcc1path" | sed 's,/cc1,,'`
  LLVMGCCLIBEXEC=$llvmgcclibexec

  llvmgccversion=`"$LLVMGCC" -dumpversion 2>&1 | sed 's/^\([0-9.]*\).*/\1/'`
  llvmgccmajvers=`echo $llvmgccversion | sed 's/^\([0-9]\).*/\1/'`
  LLVMGCC_VERSION=$llvmgccversion

  LLVMGCC_MAJVERS=$llvmgccmajvers

  llvmgcclangs=`"$LLVMGCC" -v --help 2>&1 | grep '^Configured with:' | sed 's/^.*--enable-languages=\([^ -]*\).*/\1/'`
  LLVMGCC_LANGS=$llvmgcclangs

  { echo "$as_me:$LINENO: result: ok" >&5
echo "${ECHO_T}ok" >&6; }
fi

SHLIBEXT=$libltdl_cv_shlibext


# Translate the various configuration directories and other basic
# information into substitutions that will end up in Makefile.config.in
# that these configured values can be used by the makefiles
if test "${prefix}" = "NONE" ; then
  prefix="/usr/local"
fi
eval LLVM_PREFIX="${prefix}";
eval LLVM_BINDIR="${prefix}/bin";
eval LLVM_LIBDIR="${prefix}/lib";
eval LLVM_DATADIR="${prefix}/share/llvm";
eval LLVM_DOCSDIR="${prefix}/docs/llvm";
eval LLVM_ETCDIR="${prefix}/etc/llvm";
eval LLVM_INCLUDEDIR="${prefix}/include";
eval LLVM_INFODIR="${prefix}/info";
eval LLVM_MANDIR="${prefix}/man";
LLVM_CONFIGTIME=`date`











# Place the various directores into the config.h file as #defines so that we
# can know about the installation paths within LLVM.

cat >>confdefs.h <<_ACEOF
#define LLVM_PREFIX "$LLVM_PREFIX"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_BINDIR "$LLVM_BINDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_LIBDIR "$LLVM_LIBDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DATADIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DOCSDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_ETCDIR "$LLVM_ETCDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INCLUDEDIR "$LLVM_INCLUDEDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INFODIR "$LLVM_INFODIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_MANDIR "$LLVM_MANDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_CONFIGTIME "$LLVM_CONFIGTIME"
_ACEOF



ac_config_headers="$ac_config_headers include/llvm/Config/config.h"

ac_config_headers="$ac_config_headers include/llvm/Support/DataTypes.h"

ac_config_headers="$ac_config_headers include/llvm/ADT/hash_map"

ac_config_headers="$ac_config_headers include/llvm/ADT/hash_set"

ac_config_headers="$ac_config_headers include/llvm/ADT/iterator"


ac_config_files="$ac_config_files Makefile.config"


ac_config_files="$ac_config_files llvm.spec"


ac_config_files="$ac_config_files docs/doxygen.cfg"


ac_config_files="$ac_config_files tools/llvm-config/llvm-config.in"


ac_config_commands="$ac_config_commands setup"

ac_config_commands="$ac_config_commands Makefile"


ac_config_commands="$ac_config_commands Makefile.common"


ac_config_commands="$ac_config_commands examples/Makefile"


ac_config_commands="$ac_config_commands lib/Makefile"


ac_config_commands="$ac_config_commands runtime/Makefile"


ac_config_commands="$ac_config_commands test/Makefile"


ac_config_commands="$ac_config_commands test/Makefile.tests"


ac_config_commands="$ac_config_commands tools/Makefile"


ac_config_commands="$ac_config_commands utils/Makefile"


ac_config_commands="$ac_config_commands projects/Makefile"


ac_config_commands="$ac_config_commands bindings/Makefile"


ac_config_commands="$ac_config_commands bindings/ocaml/Makefile.ocaml"



cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      *) $as_unset $ac_var ;;
      esac ;;
    esac
  done

  (set) 2>&1 |
    case $as_nl`(ac_space=' '; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;; #(
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
) |
  sed '
     /^ac_cv_env_/b end
     t clear
     :clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     :end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
  if test -w "$cache_file"; then
    test "x$cache_file" != "x/dev/null" &&
      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
echo "$as_me: updating cache $cache_file" >&6;}
    cat confcache >$cache_file
  else
    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
echo "$as_me: not updating unwritable cache $cache_file" >&6;}
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
  ac_i=`echo "$ac_i" | sed "$ac_script"`
  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
  #    will be set to the directory where LIBOBJS objects are built.
  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs


if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi
if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi

: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh


# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
case $0 in
  *[\\/]* ) as_myself=$0 ;;
  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS

     ;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
  as_myself=$0
fi
if test ! -f "$as_myself"; then
  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
  { (exit 1); exit 1; }
fi

# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# CDPATH.
$as_unset CDPATH



  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line after each line using $LINENO; the second 'sed'
  # does the real work.  The second script uses 'N' to pair each
  # line-number line with the line containing $LINENO, and appends
  # trailing '-' during substitution so that $LINENO is not a special
  # case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # scripts with optimization help from Paolo Bonzini.  Blame Lee
  # E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}


if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  as_ln_s='ln -s'
  # ... but there are two gotchas:
  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
  # In both cases, we have to default to `cp -p'.
  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
    as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
# systems may use methods other than mode bits to determine executability.
cat >conf$$.file <<_ASEOF
#! /bin/sh
exit 0
_ASEOF
chmod +x conf$$.file
if test -x conf$$.file >/dev/null 2>&1; then
  as_executable_p="test -x"
else
  as_executable_p=:
fi
rm -f conf$$.file

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


exec 6>&1

# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by llvm $as_me 2.2svn, which was
generated by GNU Autoconf 2.60.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
config_commands="$ac_config_commands"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
llvm config.status 2.2svn
configured by $0, generated by GNU Autoconf 2.60,
  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    echo "$ac_cs_version"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    { echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
  CONFIG_SHELL=$SHELL
  export CONFIG_SHELL
  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  echo "$ac_log"
} >&5

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
#
# INIT-COMMANDS
#
llvm_src="${srcdir}"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF

# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "include/llvm/Config/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/config.h" ;;
    "include/llvm/Support/DataTypes.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Support/DataTypes.h" ;;
    "include/llvm/ADT/hash_map") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/hash_map" ;;
    "include/llvm/ADT/hash_set") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/hash_set" ;;
    "include/llvm/ADT/iterator") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/iterator" ;;
    "Makefile.config") CONFIG_FILES="$CONFIG_FILES Makefile.config" ;;
    "llvm.spec") CONFIG_FILES="$CONFIG_FILES llvm.spec" ;;
    "docs/doxygen.cfg") CONFIG_FILES="$CONFIG_FILES docs/doxygen.cfg" ;;
    "tools/llvm-config/llvm-config.in") CONFIG_FILES="$CONFIG_FILES tools/llvm-config/llvm-config.in" ;;
    "setup") CONFIG_COMMANDS="$CONFIG_COMMANDS setup" ;;
    "Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
    "Makefile.common") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile.common" ;;
    "examples/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS examples/Makefile" ;;
    "lib/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Makefile" ;;
    "runtime/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS runtime/Makefile" ;;
    "test/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile" ;;
    "test/Makefile.tests") CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile.tests" ;;
    "tools/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS tools/Makefile" ;;
    "utils/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS utils/Makefile" ;;
    "projects/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS projects/Makefile" ;;
    "bindings/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS bindings/Makefile" ;;
    "bindings/ocaml/Makefile.ocaml") CONFIG_COMMANDS="$CONFIG_COMMANDS bindings/ocaml/Makefile.ocaml" ;;

  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp=
  trap 'exit_status=$?
  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

#
# Set up the sed scripts for CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then

_ACEOF



ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  cat >conf$$subs.sed <<_ACEOF
SHELL!$SHELL$ac_delim
PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
PACKAGE_NAME!$PACKAGE_NAME$ac_delim
PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
PACKAGE_STRING!$PACKAGE_STRING$ac_delim
PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
exec_prefix!$exec_prefix$ac_delim
prefix!$prefix$ac_delim
program_transform_name!$program_transform_name$ac_delim
bindir!$bindir$ac_delim
sbindir!$sbindir$ac_delim
libexecdir!$libexecdir$ac_delim
datarootdir!$datarootdir$ac_delim
datadir!$datadir$ac_delim
sysconfdir!$sysconfdir$ac_delim
sharedstatedir!$sharedstatedir$ac_delim
localstatedir!$localstatedir$ac_delim
includedir!$includedir$ac_delim
oldincludedir!$oldincludedir$ac_delim
docdir!$docdir$ac_delim
infodir!$infodir$ac_delim
htmldir!$htmldir$ac_delim
dvidir!$dvidir$ac_delim
pdfdir!$pdfdir$ac_delim
psdir!$psdir$ac_delim
libdir!$libdir$ac_delim
localedir!$localedir$ac_delim
mandir!$mandir$ac_delim
DEFS!$DEFS$ac_delim
ECHO_C!$ECHO_C$ac_delim
ECHO_N!$ECHO_N$ac_delim
ECHO_T!$ECHO_T$ac_delim
LIBS!$LIBS$ac_delim
build_alias!$build_alias$ac_delim
host_alias!$host_alias$ac_delim
target_alias!$target_alias$ac_delim
LLVM_COPYRIGHT!$LLVM_COPYRIGHT$ac_delim
subdirs!$subdirs$ac_delim
build!$build$ac_delim
build_cpu!$build_cpu$ac_delim
build_vendor!$build_vendor$ac_delim
build_os!$build_os$ac_delim
host!$host$ac_delim
host_cpu!$host_cpu$ac_delim
host_vendor!$host_vendor$ac_delim
host_os!$host_os$ac_delim
target!$target$ac_delim
target_cpu!$target_cpu$ac_delim
target_vendor!$target_vendor$ac_delim
target_os!$target_os$ac_delim
OS!$OS$ac_delim
LINKALL!$LINKALL$ac_delim
NOLINKALL!$NOLINKALL$ac_delim
LLVM_ON_UNIX!$LLVM_ON_UNIX$ac_delim
LLVM_ON_WIN32!$LLVM_ON_WIN32$ac_delim
ARCH!$ARCH$ac_delim
ENDIAN!$ENDIAN$ac_delim
CC!$CC$ac_delim
CFLAGS!$CFLAGS$ac_delim
LDFLAGS!$LDFLAGS$ac_delim
CPPFLAGS!$CPPFLAGS$ac_delim
ac_ct_CC!$ac_ct_CC$ac_delim
EXEEXT!$EXEEXT$ac_delim
OBJEXT!$OBJEXT$ac_delim
CPP!$CPP$ac_delim
GREP!$GREP$ac_delim
EGREP!$EGREP$ac_delim
LLVM_CROSS_COMPILING!$LLVM_CROSS_COMPILING$ac_delim
BUILD_CC!$BUILD_CC$ac_delim
BUILD_EXEEXT!$BUILD_EXEEXT$ac_delim
CVSBUILD!$CVSBUILD$ac_delim
ENABLE_OPTIMIZED!$ENABLE_OPTIMIZED$ac_delim
DISABLE_ASSERTIONS!$DISABLE_ASSERTIONS$ac_delim
ENABLE_EXPENSIVE_CHECKS!$ENABLE_EXPENSIVE_CHECKS$ac_delim
EXPENSIVE_CHECKS!$EXPENSIVE_CHECKS$ac_delim
DEBUG_RUNTIME!$DEBUG_RUNTIME$ac_delim
JIT!$JIT$ac_delim
TARGET_HAS_JIT!$TARGET_HAS_JIT$ac_delim
ENABLE_DOXYGEN!$ENABLE_DOXYGEN$ac_delim
ENABLE_THREADS!$ENABLE_THREADS$ac_delim
ENABLE_PIC!$ENABLE_PIC$ac_delim
TARGETS_TO_BUILD!$TARGETS_TO_BUILD$ac_delim
ENABLE_CBE_PRINTF_A!$ENABLE_CBE_PRINTF_A$ac_delim
EXTRA_OPTIONS!$EXTRA_OPTIONS$ac_delim
CXX!$CXX$ac_delim
CXXFLAGS!$CXXFLAGS$ac_delim
ac_ct_CXX!$ac_ct_CXX$ac_delim
LEX!$LEX$ac_delim
LEXLIB!$LEXLIB$ac_delim
LEX_OUTPUT_ROOT!$LEX_OUTPUT_ROOT$ac_delim
FLEX!$FLEX$ac_delim
YACC!$YACC$ac_delim
YFLAGS!$YFLAGS$ac_delim
BISON!$BISON$ac_delim
NM!$NM$ac_delim
ifGNUmake!$ifGNUmake$ac_delim
_ACEOF

  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
    break
  elif $ac_last_try; then
    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
   { (exit 1); exit 1; }; }
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
  ac_eof=`expr $ac_eof + 1`
fi

cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
CEOF$ac_eof
_ACEOF


ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  cat >conf$$subs.sed <<_ACEOF
LN_S!$LN_S$ac_delim
CMP!$CMP$ac_delim
CP!$CP$ac_delim
DATE!$DATE$ac_delim
FIND!$FIND$ac_delim
MKDIR!$MKDIR$ac_delim
MV!$MV$ac_delim
RANLIB!$RANLIB$ac_delim
RM!$RM$ac_delim
SED!$SED$ac_delim
TAR!$TAR$ac_delim
BINPWD!$BINPWD$ac_delim
GRAPHVIZ!$GRAPHVIZ$ac_delim
DOT!$DOT$ac_delim
GV!$GV$ac_delim
DOTTY!$DOTTY$ac_delim
PERL!$PERL$ac_delim
HAVE_PERL!$HAVE_PERL$ac_delim
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
BZIP2!$BZIP2$ac_delim
DOXYGEN!$DOXYGEN$ac_delim
GROFF!$GROFF$ac_delim
GZIP!$GZIP$ac_delim
POD2HTML!$POD2HTML$ac_delim
POD2MAN!$POD2MAN$ac_delim
RUNTEST!$RUNTEST$ac_delim
TCLSH!$TCLSH$ac_delim
ZIP!$ZIP$ac_delim
OCAMLC!$OCAMLC$ac_delim
OCAMLOPT!$OCAMLOPT$ac_delim
OCAMLDEP!$OCAMLDEP$ac_delim
INSTALL_LTDL_TRUE!$INSTALL_LTDL_TRUE$ac_delim
INSTALL_LTDL_FALSE!$INSTALL_LTDL_FALSE$ac_delim