configure

fi
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


fi
echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5
echo "${ECHO_T}$ac_cv_func_mmap_file" >&6
if test "$ac_cv_func_mmap_file" = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP_FILE
_ACEOF

   MMAP_FILE=yes

fi

if test "$ac_cv_func_mmap_file" = "no"
then
	{ echo "$as_me:$LINENO: WARNING: mmap() of files required but not found" >&5
echo "$as_me: WARNING: mmap() of files required but not found" >&2;}
fi
echo "$as_me:$LINENO: checking for MAP_ANONYMOUS vs. MAP_ANON" >&5
echo $ECHO_N "checking for MAP_ANONYMOUS vs. MAP_ANON... $ECHO_C" >&6
if test "${ac_cv_header_mmap_anon+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else


  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <sys/mman.h>
  #include <unistd.h>
  #include <fcntl.h>
int
main ()
{
mmap (0, 1, PROT_READ, MAP_ANONYMOUS, -1, 0); return (0);
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_header_mmap_anon=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_header_mmap_anon=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


fi
echo "$as_me:$LINENO: result: $ac_cv_header_mmap_anon" >&5
echo "${ECHO_T}$ac_cv_header_mmap_anon" >&6
if test "$ac_cv_header_mmap_anon" = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP_ANONYMOUS
_ACEOF

fi

echo "$as_me:$LINENO: checking return type of signal handlers" >&5
echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6
if test "${ac_cv_type_signal+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <sys/types.h>
#include <signal.h>
#ifdef signal
# undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif

int
main ()
{
int i;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_type_signal=void
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_type_signal=int
fi
rm -f conftest.$ac_objext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
echo "${ECHO_T}$ac_cv_type_signal" >&6

cat >>confdefs.h <<_ACEOF
#define RETSIGTYPE $ac_cv_type_signal
_ACEOF











for ac_func in getcwd gettimeofday strdup strtoq strtoll backtrace isatty mkstemp getrusage
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
echo "$as_me:$LINENO: checking for $ac_func" >&5
echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
if eval "test \"\${$as_ac_var+set}\" = set"; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
{
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char $ac_func ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
char (*f) () = $ac_func;
#endif
#ifdef __cplusplus
}
#endif

int
main ()
{
return f != $ac_func;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  eval "$as_ac_var=yes"
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

eval "$as_ac_var=no"
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
if test `eval echo '${'$as_ac_var'}'` = yes; then
  cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF

fi
done

echo "$as_me:$LINENO: checking for mprotect" >&5
echo $ECHO_N "checking for mprotect... $ECHO_C" >&6
if test "${ac_cv_func_mprotect+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char mprotect (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
{
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char mprotect ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_mprotect) || defined (__stub___mprotect)
choke me
#else
char (*f) () = mprotect;
#endif
#ifdef __cplusplus
}
#endif

int
main ()
{
return f != mprotect;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mprotect=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_func_mprotect=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_func_mprotect" >&5
echo "${ECHO_T}$ac_cv_func_mprotect" >&6
if test $ac_cv_func_mprotect = yes; then
  :
else
  { { echo "$as_me:$LINENO: error: Function mprotect() required but not found" >&5
echo "$as_me: error: Function mprotect() required but not found" >&2;}
   { (exit 1); exit 1; }; }
fi



  echo "$as_me:$LINENO: checking for compiler -Wl,-R<path> option" >&5
echo $ECHO_N "checking for compiler -Wl,-R<path> option... $ECHO_C" >&6


  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

  oldcflags="$CFLAGS"
  CFLAGS="$CFLAGS -Wl,-R."
  cat >conftest.$ac_ext <<_ACEOF
int main() { return 0; }
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_link_use_r=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_link_use_r=no
fi
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
  CFLAGS="$oldcflags"
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

  echo "$as_me:$LINENO: result: $ac_cv_link_use_r" >&5
echo "${ECHO_T}$ac_cv_link_use_r" >&6
  if test "$ac_cv_link_use_r" = yes
  then

cat >>confdefs.h <<\_ACEOF
#define HAVE_LINK_R 1
_ACEOF

  fi


# Check whether --enable-optimized or --disable-optimized was given.
if test "${enable_optimized+set}" = set; then
  enableval="$enable_optimized"

else
  enableval=no
fi;
if test ${enableval} = "no"
then
	ENABLE_OPTIMIZED=

else
	ENABLE_OPTIMIZED=ENABLE_OPTIMIZED=1

fi




 # Check whether --enable-spec95 or --disable-spec95 was given.
if test "${enable_spec95+set}" = set; then
  enableval="$enable_spec95"
  checkresult=$enableval
else
  checkresult=auto
fi;
echo "$as_me:$LINENO: checking for spec95 benchmark sources" >&5
echo $ECHO_N "checking for spec95 benchmark sources... $ECHO_C" >&6
case "$checkresult" in
auto|yes)
    defaultdir=/home/vadve/shared/benchmarks/spec95/benchspec
	if test -d "$defaultdir"
	then
		SPEC95_ROOT=$defaultdir

		USE_SPEC95=USE_SPEC95=1

        checkresult="yes, found in $defaultdir"
    else
        checkresult=no
    fi
    ;;
no)


    checkresult=no
    ;;
*)  if test -d "$checkresult"
    then
        SPEC95_ROOT="$checkresult"

        USE_SPEC95=USE_SPEC95=1

        checkresult="yes, in $checkresult"
    else


        checkresult="no, not found in $checkresult"
    fi
    ;;
esac
echo "$as_me:$LINENO: result: $checkresult" >&5
echo "${ECHO_T}$checkresult" >&6



 # Check whether --enable-spec2000 or --disable-spec2000 was given.
if test "${enable_spec2000+set}" = set; then
  enableval="$enable_spec2000"
  checkresult=$enableval
else
  checkresult=auto
fi;
echo "$as_me:$LINENO: checking for spec2000 benchmark sources" >&5
echo $ECHO_N "checking for spec2000 benchmark sources... $ECHO_C" >&6
case "$checkresult" in
auto|yes)
    defaultdir=/home/vadve/shared/benchmarks/speccpu2000/benchspec
	if test -d "$defaultdir"
	then
		SPEC2000_ROOT=$defaultdir

		USE_SPEC2000=USE_SPEC2000=1

        checkresult="yes, found in $defaultdir"
    else
        checkresult=no
    fi
    ;;
no)


    checkresult=no
    ;;
*)  if test -d "$checkresult"
    then
        SPEC2000_ROOT="$checkresult"

        USE_SPEC2000=USE_SPEC2000=1

        checkresult="yes, in $checkresult"
    else


        checkresult="no, not found in $checkresult"
    fi
    ;;
esac
echo "$as_me:$LINENO: result: $checkresult" >&5
echo "${ECHO_T}$checkresult" >&6



 # Check whether --enable-povray or --disable-povray was given.
if test "${enable_povray+set}" = set; then
  enableval="$enable_povray"
  checkresult=$enableval
else
  checkresult=auto
fi;
echo "$as_me:$LINENO: checking for povray benchmark sources" >&5
echo $ECHO_N "checking for povray benchmark sources... $ECHO_C" >&6
case "$checkresult" in
auto|yes)
    defaultdir=/home/vadve/shared/benchmarks/povray31
	if test -d "$defaultdir"
	then
		POVRAY_ROOT=$defaultdir

		USE_POVRAY=USE_POVRAY=1

        checkresult="yes, found in $defaultdir"
    else
        checkresult=no
    fi
    ;;
no)


    checkresult=no
    ;;
*)  if test -d "$checkresult"
    then
        POVRAY_ROOT="$checkresult"

        USE_POVRAY=USE_POVRAY=1

        checkresult="yes, in $checkresult"
    else


        checkresult="no, not found in $checkresult"
    fi
    ;;
esac
echo "$as_me:$LINENO: result: $checkresult" >&5
echo "${ECHO_T}$checkresult" >&6



# Check whether --enable-precompiled_bytecode or --disable-precompiled_bytecode was given.
if test "${enable_precompiled_bytecode+set}" = set; then
  enableval="$enable_precompiled_bytecode"

else
  enableval=no
fi;
if test ${enableval} = "no"
then
	UPB=

else
	UPB=USE_PRECOMPILED_BYTECODE=1

fi

# Check whether --enable-llc_diffs or --disable-llc_diffs was given.
if test "${enable_llc_diffs+set}" = set; then
  enableval="$enable_llc_diffs"

else
  enableval=yes
fi;
if test ${enableval} = "no"
then
	DISABLE_LLC_DIFFS=DISABLE_LLC_DIFFS:=1

else
	DISABLE_LLC_DIFFS=

fi

# Check whether --enable-jit or --disable-jit was given.
if test "${enable_jit+set}" = set; then
  enableval="$enable_jit"

else
  enableval=default
fi;
if test ${enableval} = "no"
then
	JIT=

else
	case $target in
		*i*86*)
			JIT=TARGET_HAS_JIT=1

			;;
		*sparc*)
			JIT=TARGET_HAS_JIT=1

			;;
		*)
			JIT=

			;;
	esac
fi


# Check whether --with-llvmgccdir or --without-llvmgccdir was given.
if test "${with_llvmgccdir+set}" = set; then
  withval="$with_llvmgccdir"
  LLVMGCCDIR=$withval

fi;
echo "$as_me:$LINENO: checking for llvm-gcc" >&5
echo $ECHO_N "checking for llvm-gcc... $ECHO_C" >&6
LLVM_GCC_CHECK=no
if test -d "$LLVMGCCDIR"
then
	if test -x "$LLVMGCCDIR/bin/gcc"
	then
		LLVM_GCC_CHECK="$LLVMGCCDIR/bin/gcc"
	fi
fi
llvmgccwarn=no
echo "$as_me:$LINENO: result: $LLVM_GCC_CHECK" >&5
echo "${ECHO_T}$LLVM_GCC_CHECK" >&6
if test "$LLVM_GCC_CHECK" = "no"
then
    llvmgccwarn=yes
fi
echo "$as_me:$LINENO: checking whether llvm-gcc is sane" >&5
echo $ECHO_N "checking whether llvm-gcc is sane... $ECHO_C" >&6
LLVM_GCC_SANE=no
if test -x "$LLVM_GCC_CHECK"
then
	cp /dev/null conftest.c
    "$LLVM_GCC_CHECK" -S -o - conftest.c | grep implementation > /dev/null 2>&1
	if test $? -eq 0
	then
		LLVM_GCC_SANE=yes
	fi
	rm conftest.c
	llvmcc1path=`"$LLVM_GCC_CHECK" --print-prog-name=cc1`
	LLVMCC1=$llvmcc1path

	llvmcc1pluspath=`"$LLVM_GCC_CHECK" --print-prog-name=cc1plus`
	LLVMCC1PLUS=$llvmcc1pluspath

fi
echo "$as_me:$LINENO: result: $LLVM_GCC_SANE" >&5
echo "${ECHO_T}$LLVM_GCC_SANE" >&6
if test "$LLVM_GCC_SANE" = "no"
then
	llvmgccwarn=yes
fi


# Check whether --with-bcrepos or --without-bcrepos was given.
if test "${with_bcrepos+set}" = set; then
  withval="$with_bcrepos"
  BCR=$withval

else
  BCR=/home/vadve/lattner/LLVMPrograms

fi;


# Check whether --with-papi or --without-papi was given.
if test "${with_papi+set}" = set; then
  withval="$with_papi"
  PAPIDIR=$withval

else
  PAPIDIR=/home/vadve/shared/Sparc/papi-2.3.4.1

fi;

echo "$as_me:$LINENO: checking for shared library suffix" >&5
echo $ECHO_N "checking for shared library suffix... $ECHO_C" >&6
eval "SHLIBEXT=$shrext"
echo "$as_me:$LINENO: result: $SHLIBEXT" >&5
echo "${ECHO_T}$SHLIBEXT" >&6
SHLIBEXT=$SHLIBEXT


cat >>confdefs.h <<_ACEOF
#define SHLIBEXT "$SHLIBEXT"
_ACEOF


                                                            ac_config_files="$ac_config_files Makefile.config include/Support/DataTypes.h include/Support/ThreadSupport.h include/Support/hash_map include/Support/hash_set include/Support/iterator"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
  (set) 2>&1 |
    case `(ac_space=' '; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
        "s/'/'\\\\''/g;
    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;;
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n \
        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} |
  sed '
     t clear
     : clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     : end' >>confcache
if diff $cache_file confcache >/dev/null 2>&1; then :; else
  if test -w $cache_file; then
    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
    cat confcache >$cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[ 	]*\):*/\1/;
s/:*$//;
s/^[^=]*=[ 	]*$//;
}'
fi

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_i=`echo "$ac_i" |
         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
  # 2. Add them.
  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs



: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi

# Support unset when possible.
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# Work around bugs in pre-3.0 UWIN ksh.
$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)$' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
  	  /^X\/\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`


# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi


  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
  # Find who we are.  Look in the path if we contain no path at all
  # relative or not.
  case $0 in
    *[\\/]* ) as_myself=$0 ;;
    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done

       ;;
  esac
  # We did not find ourselves, most probably we were run as `sh COMMAND'
  # in which case we are not to be found in the path.
  if test "x$as_myself" = x; then
    as_myself=$0
  fi
  if test ! -f "$as_myself"; then
    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
   { (exit 1); exit 1; }; }
  fi
  case $CONFIG_SHELL in
  '')
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for as_base in sh bash ksh sh5; do
	 case $as_dir in
	 /*)
	   if ("$as_dir/$as_base" -c '
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
	     CONFIG_SHELL=$as_dir/$as_base
	     export CONFIG_SHELL
	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
	   fi;;
	 esac
       done
done
;;
  esac

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line before each line; the second 'sed' does the real
  # work.  The second script uses 'N' to pair each line-number line
  # with the numbered line, and appends trailing '-' during
  # substitution so that $LINENO is not a special case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
  sed '=' <$as_myself |
    sed '
      N
      s,$,-,
      : loop
      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
      t loop
      s,-$,,
      s,^['$as_cr_digits']*\n,,
    ' >$as_me.lineno &&
  chmod +x $as_me.lineno ||
    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensible to this).
  . ./$as_me.lineno
  # Exit status is that of the last command.
  exit
}


case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links