configure

_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
$ac_includes_default
/* malloc might have been renamed as rpl_malloc. */
#undef malloc

/* Thanks to Mike Haertel and Jim Avera for this test.
   Here is a matrix of mmap possibilities:
	mmap private not fixed
	mmap private fixed at somewhere currently unmapped
	mmap private fixed at somewhere already mapped
	mmap shared not fixed
	mmap shared fixed at somewhere currently unmapped
	mmap shared fixed at somewhere already mapped
   For private mappings, we should verify that changes cannot be read()
   back from the file, nor mmap's back from the file at a different
   address.  (There have been systems where private was not correctly
   implemented like the infamous i386 svr4.0, and systems where the
   VM page cache was not coherent with the file system buffer cache
   like early versions of FreeBSD and possibly contemporary NetBSD.)
   For shared mappings, we should conversely verify that changes get
   propagated back to all the places they're supposed to be.

   Grep wants private fixed already mapped.
   The main things grep needs to know about mmap are:
   * does it exist and is it safe to write into the mmap'd area
   * how to use it (BSD variants)  */

#include <fcntl.h>
#include <sys/mman.h>

#if !STDC_HEADERS && !HAVE_STDLIB_H
char *malloc ();
#endif

/* This mess was copied from the GNU getpagesize.h.  */
#if !HAVE_GETPAGESIZE
/* Assume that all systems that can run configure have sys/param.h.  */
# if !HAVE_SYS_PARAM_H
#  define HAVE_SYS_PARAM_H 1
# endif

# ifdef _SC_PAGESIZE
#  define getpagesize() sysconf(_SC_PAGESIZE)
# else /* no _SC_PAGESIZE */
#  if HAVE_SYS_PARAM_H
#   include <sys/param.h>
#   ifdef EXEC_PAGESIZE
#    define getpagesize() EXEC_PAGESIZE
#   else /* no EXEC_PAGESIZE */
#    ifdef NBPG
#     define getpagesize() NBPG * CLSIZE
#     ifndef CLSIZE
#      define CLSIZE 1
#     endif /* no CLSIZE */
#    else /* no NBPG */
#     ifdef NBPC
#      define getpagesize() NBPC
#     else /* no NBPC */
#      ifdef PAGESIZE
#       define getpagesize() PAGESIZE
#      endif /* PAGESIZE */
#     endif /* no NBPC */
#    endif /* no NBPG */
#   endif /* no EXEC_PAGESIZE */
#  else /* no HAVE_SYS_PARAM_H */
#   define getpagesize() 8192	/* punt totally */
#  endif /* no HAVE_SYS_PARAM_H */
# endif /* no _SC_PAGESIZE */

#endif /* no HAVE_GETPAGESIZE */

int
main ()
{
  char *data, *data2, *data3;
  int i, pagesize;
  int fd;

  pagesize = getpagesize ();

  /* First, make a file with some known garbage in it. */
  data = (char *) malloc (pagesize);
  if (!data)
    exit (1);
  for (i = 0; i < pagesize; ++i)
    *(data + i) = rand ();
  umask (0);
  fd = creat ("conftest.mmap", 0600);
  if (fd < 0)
    exit (1);
  if (write (fd, data, pagesize) != pagesize)
    exit (1);
  close (fd);

  /* Next, try to mmap the file at a fixed address which already has
     something else allocated at it.  If we can, also make sure that
     we see the same garbage.  */
  fd = open ("conftest.mmap", O_RDWR);
  if (fd < 0)
    exit (1);
  data2 = (char *) malloc (2 * pagesize);
  if (!data2)
    exit (1);
  data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1);
  if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
		     MAP_PRIVATE | MAP_FIXED, fd, 0L))
    exit (1);
  for (i = 0; i < pagesize; ++i)
    if (*(data + i) != *(data2 + i))
      exit (1);

  /* Finally, make sure that changes to the mapped area do not
     percolate back to the file as seen by read().  (This is a bug on
     some variants of i386 svr4.0.)  */
  for (i = 0; i < pagesize; ++i)
    *(data2 + i) = *(data2 + i) + 1;
  data3 = (char *) malloc (pagesize);
  if (!data3)
    exit (1);
  if (read (fd, data3, pagesize) != pagesize)
    exit (1);
  for (i = 0; i < pagesize; ++i)
    if (*(data + i) != *(data3 + i))
      exit (1);
  close (fd);
  exit (0);
}
_ACEOF
rm -f conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mmap_fixed_mapped=yes
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
ac_cv_func_mmap_fixed_mapped=no
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6
if test $ac_cv_func_mmap_fixed_mapped = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP 1
_ACEOF

fi
rm -f conftest.mmap

echo "$as_me:$LINENO: checking for mmap of files" >&5
echo $ECHO_N "checking for mmap of files... $ECHO_C" >&6
if test "${ac_cv_func_mmap_file+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
   ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

  if test "$cross_compiling" = yes; then
  ac_cv_func_mmap_file=no
else
  cat >conftest.$ac_ext <<_ACEOF

    /* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <sys/types.h>
#include <sys/mman.h>
#include <fcntl.h>

int
main ()
{

  int fd;
  fd = creat ("foo",0777);
  fd = (int) mmap (0, 1, PROT_READ, MAP_SHARED, fd, 0);
  unlink ("foo");
  return (fd != (int) MAP_FAILED);
  ;
  return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mmap_file=yes
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
ac_cv_func_mmap_file=no
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


fi
echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5
echo "${ECHO_T}$ac_cv_func_mmap_file" >&6
if test "$ac_cv_func_mmap_file" = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP_FILE
_ACEOF

   MMAP_FILE=yes

fi

echo "$as_me:$LINENO: checking if /dev/zero is needed for mmap" >&5
echo $ECHO_N "checking if /dev/zero is needed for mmap... $ECHO_C" >&6
if test "${ac_cv_need_dev_zero_for_mmap+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test "$llvm_cv_os_type" = "Interix" ; then
   ac_cv_need_dev_zero_for_mmap=yes
 else
   ac_cv_need_dev_zero_for_mmap=no
 fi

fi
echo "$as_me:$LINENO: result: $ac_cv_need_dev_zero_for_mmap" >&5
echo "${ECHO_T}$ac_cv_need_dev_zero_for_mmap" >&6
if test "$ac_cv_need_dev_zero_for_mmap" = yes; then

cat >>confdefs.h <<\_ACEOF
#define NEED_DEV_ZERO_FOR_MMAP 1
_ACEOF

fi
echo "$as_me:$LINENO: checking for mprotect" >&5
echo $ECHO_N "checking for mprotect... $ECHO_C" >&6
if test "${ac_cv_func_mprotect+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
/* Define mprotect to an innocuous variant, in case <limits.h> declares mprotect.
   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
#define mprotect innocuous_mprotect

/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char mprotect (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */

#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif

#undef mprotect

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
{
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char mprotect ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_mprotect) || defined (__stub___mprotect)
choke me
#else
char (*f) () = mprotect;
#endif
#ifdef __cplusplus
}
#endif

int
main ()
{
return f != mprotect;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
	 { ac_try='test -z "$ac_c_werror_flag"
			 || test ! -s conftest.err'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; } &&
	 { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mprotect=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_func_mprotect=no
fi
rm -f conftest.err conftest.$ac_objext \
      conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_func_mprotect" >&5
echo "${ECHO_T}$ac_cv_func_mprotect" >&6
if test $ac_cv_func_mprotect = yes; then
  :
else
  { { echo "$as_me:$LINENO: error: Function mprotect() required but not found" >&5
echo "$as_me: error: Function mprotect() required but not found" >&2;}
   { (exit 1); exit 1; }; }
fi


if test "$ac_cv_func_mmap_fixed_mapped" = "no"
then
  { echo "$as_me:$LINENO: WARNING: mmap() of a fixed address required but not supported" >&5
echo "$as_me: WARNING: mmap() of a fixed address required but not supported" >&2;}
fi
if test "$ac_cv_func_mmap_file" = "no"
then
  { echo "$as_me:$LINENO: WARNING: mmap() of files required but not found" >&5
echo "$as_me: WARNING: mmap() of files required but not found" >&2;}
fi


echo "$as_me:$LINENO: checking whether llvm-gcc is sane" >&5
echo $ECHO_N "checking whether llvm-gcc is sane... $ECHO_C" >&6
if test "${llvm_cv_llvmgcc_sanity+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  llvm_cv_llvmgcc_sanity="no"
if test -x "$LLVMGCC" ; then
  cp /dev/null conftest.c
  "$LLVMGCC" -S -o - conftest.c | grep implementation > /dev/null 2>&1
  if test $? -eq 0 ; then
    llvm_cv_llvmgcc_sanity="yes"
  fi
  rm conftest.c
fi
fi
echo "$as_me:$LINENO: result: $llvm_cv_llvmgcc_sanity" >&5
echo "${ECHO_T}$llvm_cv_llvmgcc_sanity" >&6

if test "$llvm_cv_llvmgcc_sanity" = "yes" ; then
  llvmcc1path=`"$LLVMGCC" --print-prog-name=cc1`
  LLVMCC1=$llvmcc1path

  llvmcc1pluspath=`"$LLVMGCC" --print-prog-name=cc1plus`
  LLVMCC1PLUS=$llvmcc1pluspath

  llvmgccdir=`echo "$llvmcc1path" | sed 's,/libexec/.*,,'`
  LLVMGCCDIR=$llvmgccdir

fi

SHLIBEXT=$libltdl_cv_shlibext


# Translate the various configuration directories and other basic
# information into substitutions that will end up in Makefile.config.in
# that these configured values can be used by the makefiles
eval LLVM_PREFIX="${prefix}";
eval LLVM_BINDIR="${prefix}/bin";
eval LLVM_LIBDIR="${prefix}/lib";
eval LLVM_DATADIR="${prefix}/share/llvm";
eval LLVM_DOCSDIR="${prefix}/docs/llvm";
eval LLVM_ETCDIR="${prefix}/etc/llvm";
eval LLVM_INCLUDEDIR="${prefix}/include";
eval LLVM_INFODIR="${prefix}/info";
eval LLVM_MANDIR="${prefix}/man";
LLVM_CONFIGTIME=`date`











# Place the various directores into the config.h file as #defines so that we
# can know about the installation paths within LLVM.

cat >>confdefs.h <<_ACEOF
#define LLVM_PREFIX "$LLVM_PREFIX"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_BINDIR "$LLVM_BINDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_LIBDIR "$LLVM_LIBDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DATADIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DOCSDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_ETCDIR "$LLVM_ETCDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INCLUDEDIR "$LLVM_INCLUDEDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INFODIR "$LLVM_INFODIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_MANDIR "$LLVM_MANDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_CONFIGTIME "$LLVM_CONFIGTIME"
_ACEOF



          ac_config_headers="$ac_config_headers include/llvm/Config/config.h"

          ac_config_headers="$ac_config_headers include/llvm/Support/DataTypes.h"

          ac_config_headers="$ac_config_headers include/llvm/ADT/hash_map"

          ac_config_headers="$ac_config_headers include/llvm/ADT/hash_set"

          ac_config_headers="$ac_config_headers include/llvm/ADT/iterator"


          ac_config_files="$ac_config_files Makefile.config"


          ac_config_files="$ac_config_files docs/doxygen.cfg"


          ac_config_commands="$ac_config_commands setup"

          ac_config_commands="$ac_config_commands Makefile"


          ac_config_commands="$ac_config_commands Makefile.common"


          ac_config_commands="$ac_config_commands examples/Makefile"


          ac_config_commands="$ac_config_commands lib/Makefile"


          ac_config_commands="$ac_config_commands runtime/Makefile"


          ac_config_commands="$ac_config_commands test/Makefile"


          ac_config_commands="$ac_config_commands test/Makefile.tests"


          ac_config_commands="$ac_config_commands tools/Makefile"


          ac_config_commands="$ac_config_commands utils/Makefile"


          ac_config_commands="$ac_config_commands projects/Makefile"



cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
  (set) 2>&1 |
    case `(ac_space=' '; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;;
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n \
	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} |
  sed '
     t clear
     : clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     : end' >>confcache
if diff $cache_file confcache >/dev/null 2>&1; then :; else
  if test -w $cache_file; then
    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
    cat confcache >$cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[	 ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[	 ]*$//;
}'
fi

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_i=`echo "$ac_i" |
	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
  # 2. Add them.
  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs


if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi
if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi

: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi
DUALCASE=1; export DUALCASE # for MKS sh

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# Work around bugs in pre-3.0 UWIN ksh.
$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)$' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
  	  /^X\/\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`


# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi


  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
  # Find who we are.  Look in the path if we contain no path at all
  # relative or not.
  case $0 in
    *[\\/]* ) as_myself=$0 ;;
    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done

       ;;
  esac
  # We did not find ourselves, most probably we were run as `sh COMMAND'
  # in which case we are not to be found in the path.
  if test "x$as_myself" = x; then
    as_myself=$0
  fi
  if test ! -f "$as_myself"; then
    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
   { (exit 1); exit 1; }; }
  fi
  case $CONFIG_SHELL in
  '')
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for as_base in sh bash ksh sh5; do
	 case $as_dir in
	 /*)
	   if ("$as_dir/$as_base" -c '
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
	     CONFIG_SHELL=$as_dir/$as_base
	     export CONFIG_SHELL
	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
	   fi;;
	 esac
       done
done
;;
  esac

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line before each line; the second 'sed' does the real
  # work.  The second script uses 'N' to pair each line-number line
  # with the numbered line, and appends trailing '-' during
  # substitution so that $LINENO is not a special case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
  sed '=' <$as_myself |
    sed '
      N
      s,$,-,
      : loop
      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
      t loop
      s,-$,,
      s,^['$as_cr_digits']*\n,,
    ' >$as_me.lineno &&
  chmod +x $as_me.lineno ||
    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensible to this).
  . ./$as_me.lineno
  # Exit status is that of the last command.
  exit
}


case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links
    as_ln_s='cp -p'
  else
    as_ln_s='ln -s'
  fi
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

as_executable_p="test -f"

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" 	$as_nl"

# CDPATH.
$as_unset CDPATH

exec 6>&1

# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.  Logging --version etc. is OK.
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
} >&5
cat >&5 <<_CSEOF

This file was extended by llvm $as_me 1.6cvs, which was
generated by GNU Autoconf 2.59.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

_CSEOF
echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
echo >&5
_ACEOF

# Files that config.status was made for.
if test -n "$ac_config_files"; then
  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_headers"; then
  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_links"; then
  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_commands"; then
  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi

cat >>$CONFIG_STATUS <<\_ACEOF

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."
_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
llvm config.status 1.6cvs
configured by $0, generated by GNU Autoconf 2.59,
  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2003 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
INSTALL="$INSTALL"
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "x$1" : 'x\([^=]*\)='`
    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
    ac_shift=: