configure

done

       ;;
  esac
  # We did not find ourselves, most probably we were run as `sh COMMAND'
  # in which case we are not to be found in the path.
  if test "x$as_myself" = x; then
    as_myself=$0
  fi
  if test ! -f "$as_myself"; then
    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
   { (exit 1); exit 1; }; }
  fi
  case $CONFIG_SHELL in
  '')
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for as_base in sh bash ksh sh5; do
	 case $as_dir in
	 /*)
	   if ("$as_dir/$as_base" -c '
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
	     CONFIG_SHELL=$as_dir/$as_base
	     export CONFIG_SHELL
	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
	   fi;;
	 esac
       done
done
;;
  esac

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line before each line; the second 'sed' does the real
  # work.  The second script uses 'N' to pair each line-number line
  # with the numbered line, and appends trailing '-' during
  # substitution so that $LINENO is not a special case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
  sed '=' <$as_myself |
    sed '
      N
      s,$,-,
      : loop
      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
      t loop
      s,-$,,
      s,^['$as_cr_digits']*\n,,
    ' >$as_me.lineno &&
  chmod +x $as_me.lineno ||
    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensible to this).
  . ./$as_me.lineno
  # Exit status is that of the last command.
  exit
}


case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links
    as_ln_s='cp -p'
  else
    as_ln_s='ln -s'
  fi
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

as_executable_p="test -f"

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" 	$as_nl"

# CDPATH.
$as_unset CDPATH

exec 6>&1

# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.  Logging --version etc. is OK.
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
} >&5
cat >&5 <<_CSEOF

This file was extended by llvm $as_me 1.7cvs, which was
generated by GNU Autoconf 2.59.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

_CSEOF
echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
echo >&5
_ACEOF

# Files that config.status was made for.
if test -n "$ac_config_files"; then
  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_headers"; then
  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_links"; then
  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_commands"; then
  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi

cat >>$CONFIG_STATUS <<\_ACEOF

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."
_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
llvm config.status 1.7cvs
configured by $0, generated by GNU Autoconf 2.59,
  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2003 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
INSTALL="$INSTALL"
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "x$1" : 'x\([^=]*\)='`
    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  -*)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  *) # This is not an option, so the user has probably given explicit
     # arguments.
     ac_option=$1
     ac_need_defaults=false;;
  esac

  case $ac_option in
  # Handling of the options.
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --vers* | -V )
    echo "$ac_cs_version"; exit 0 ;;
  --he | --h)
    # Conflict between --help and --header
    { { echo "$as_me:$LINENO: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit 0 ;;
  --debug | --d* | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1" ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
#
# INIT-COMMANDS section.
#

llvm_src="${srcdir}"

_ACEOF



cat >>$CONFIG_STATUS <<\_ACEOF
for ac_config_target in $ac_config_targets
do
  case "$ac_config_target" in
  # Handling of arguments.
  "Makefile.config" ) CONFIG_FILES="$CONFIG_FILES Makefile.config" ;;
  "docs/doxygen.cfg" ) CONFIG_FILES="$CONFIG_FILES docs/doxygen.cfg" ;;
  "setup" ) CONFIG_COMMANDS="$CONFIG_COMMANDS setup" ;;
  "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
  "Makefile.common" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile.common" ;;
  "examples/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS examples/Makefile" ;;
  "lib/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Makefile" ;;
  "runtime/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS runtime/Makefile" ;;
  "test/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile" ;;
  "test/Makefile.tests" ) CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile.tests" ;;
  "tools/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS tools/Makefile" ;;
  "utils/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS utils/Makefile" ;;
  "projects/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS projects/Makefile" ;;
  "include/llvm/Config/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/config.h" ;;
  "include/llvm/Support/DataTypes.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Support/DataTypes.h" ;;
  "include/llvm/ADT/hash_map" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/hash_map" ;;
  "include/llvm/ADT/hash_set" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/hash_set" ;;
  "include/llvm/ADT/iterator" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/iterator" ;;
  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done

# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason to put it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}

# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./confstat$$-$RANDOM
  (umask 077 && mkdir $tmp)
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF

#
# CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "\$CONFIG_FILES"; then
  # Protect against being on the right side of a sed subst in config.status.
  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
s,@SHELL@,$SHELL,;t t
s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
s,@exec_prefix@,$exec_prefix,;t t
s,@prefix@,$prefix,;t t
s,@program_transform_name@,$program_transform_name,;t t
s,@bindir@,$bindir,;t t
s,@sbindir@,$sbindir,;t t
s,@libexecdir@,$libexecdir,;t t
s,@datadir@,$datadir,;t t
s,@sysconfdir@,$sysconfdir,;t t
s,@sharedstatedir@,$sharedstatedir,;t t
s,@localstatedir@,$localstatedir,;t t
s,@libdir@,$libdir,;t t
s,@includedir@,$includedir,;t t
s,@oldincludedir@,$oldincludedir,;t t
s,@infodir@,$infodir,;t t
s,@mandir@,$mandir,;t t
s,@build_alias@,$build_alias,;t t
s,@host_alias@,$host_alias,;t t
s,@target_alias@,$target_alias,;t t
s,@DEFS@,$DEFS,;t t
s,@ECHO_C@,$ECHO_C,;t t
s,@ECHO_N@,$ECHO_N,;t t
s,@ECHO_T@,$ECHO_T,;t t
s,@LIBS@,$LIBS,;t t
s,@LLVM_COPYRIGHT@,$LLVM_COPYRIGHT,;t t
s,@subdirs@,$subdirs,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@build_vendor@,$build_vendor,;t t
s,@build_os@,$build_os,;t t
s,@host@,$host,;t t
s,@host_cpu@,$host_cpu,;t t
s,@host_vendor@,$host_vendor,;t t
s,@host_os@,$host_os,;t t
s,@target@,$target,;t t
s,@target_cpu@,$target_cpu,;t t
s,@target_vendor@,$target_vendor,;t t
s,@target_os@,$target_os,;t t
s,@OS@,$OS,;t t
s,@LLVM_ON_UNIX@,$LLVM_ON_UNIX,;t t
s,@LLVM_ON_WIN32@,$LLVM_ON_WIN32,;t t
s,@ARCH@,$ARCH,;t t
s,@ENDIAN@,$ENDIAN,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t
s,@CPPFLAGS@,$CPPFLAGS,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
s,@ENABLE_OPTIMIZED@,$ENABLE_OPTIMIZED,;t t
s,@DEBUG_RUNTIME@,$DEBUG_RUNTIME,;t t
s,@JIT@,$JIT,;t t
s,@ENABLE_DOXYGEN@,$ENABLE_DOXYGEN,;t t
s,@ENABLE_THREADS@,$ENABLE_THREADS,;t t
s,@TARGETS_TO_BUILD@,$TARGETS_TO_BUILD,;t t
s,@CPP@,$CPP,;t t
s,@CXX@,$CXX,;t t
s,@CXXFLAGS@,$CXXFLAGS,;t t
s,@ac_ct_CXX@,$ac_ct_CXX,;t t
s,@LEX@,$LEX,;t t
s,@LEXLIB@,$LEXLIB,;t t
s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t
s,@FLEX@,$FLEX,;t t
s,@YACC@,$YACC,;t t
s,@BISON@,$BISON,;t t
s,@ifGNUmake@,$ifGNUmake,;t t
s,@LN_S@,$LN_S,;t t
s,@CMP@,$CMP,;t t
s,@CP@,$CP,;t t
s,@DATE@,$DATE,;t t
s,@FIND@,$FIND,;t t
s,@GREP@,$GREP,;t t
s,@MKDIR@,$MKDIR,;t t
s,@MV@,$MV,;t t
s,@RANLIB@,$RANLIB,;t t
s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
s,@RM@,$RM,;t t
s,@SED@,$SED,;t t
s,@TAR@,$TAR,;t t
s,@GRAPHVIZ@,$GRAPHVIZ,;t t
s,@GV@,$GV,;t t
s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
s,@INSTALL_DATA@,$INSTALL_DATA,;t t
s,@BZIP2@,$BZIP2,;t t
s,@DOT@,$DOT,;t t
s,@DOXYGEN@,$DOXYGEN,;t t
s,@ETAGS@,$ETAGS,;t t
s,@GROFF@,$GROFF,;t t
s,@GZIP@,$GZIP,;t t
s,@POD2HTML@,$POD2HTML,;t t
s,@POD2MAN@,$POD2MAN,;t t
s,@RUNTEST@,$RUNTEST,;t t
s,@TCLSH@,$TCLSH,;t t
s,@ZIP@,$ZIP,;t t
s,@EGREP@,$EGREP,;t t
s,@INSTALL_LTDL_TRUE@,$INSTALL_LTDL_TRUE,;t t
s,@INSTALL_LTDL_FALSE@,$INSTALL_LTDL_FALSE,;t t
s,@CONVENIENCE_LTDL_TRUE@,$CONVENIENCE_LTDL_TRUE,;t t
s,@CONVENIENCE_LTDL_FALSE@,$CONVENIENCE_LTDL_FALSE,;t t
s,@LIBADD_DL@,$LIBADD_DL,;t t
s,@ECHO@,$ECHO,;t t
s,@AR@,$AR,;t t
s,@ac_ct_AR@,$ac_ct_AR,;t t
s,@STRIP@,$STRIP,;t t
s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
s,@CXXCPP@,$CXXCPP,;t t
s,@F77@,$F77,;t t
s,@FFLAGS@,$FFLAGS,;t t
s,@ac_ct_F77@,$ac_ct_F77,;t t
s,@LIBTOOL@,$LIBTOOL,;t t
s,@ETAGSFLAGS@,$ETAGSFLAGS,;t t
s,@LLVMGCC@,$LLVMGCC,;t t
s,@LLVMGXX@,$LLVMGXX,;t t
s,@ALLOCA@,$ALLOCA,;t t
s,@MMAP_FILE@,$MMAP_FILE,;t t
s,@LLVMCC1@,$LLVMCC1,;t t
s,@LLVMCC1PLUS@,$LLVMCC1PLUS,;t t
s,@LLVMGCCDIR@,$LLVMGCCDIR,;t t
s,@SHLIBEXT@,$SHLIBEXT,;t t
s,@LLVM_PREFIX@,$LLVM_PREFIX,;t t
s,@LLVM_BINDIR@,$LLVM_BINDIR,;t t
s,@LLVM_LIBDIR@,$LLVM_LIBDIR,;t t
s,@LLVM_DATADIR@,$LLVM_DATADIR,;t t
s,@LLVM_DOCSDIR@,$LLVM_DOCSDIR,;t t
s,@LLVM_ETCDIR@,$LLVM_ETCDIR,;t t
s,@LLVM_INCLUDEDIR@,$LLVM_INCLUDEDIR,;t t
s,@LLVM_INFODIR@,$LLVM_INFODIR,;t t
s,@LLVM_MANDIR@,$LLVM_MANDIR,;t t
s,@LLVM_CONFIGTIME@,$LLVM_CONFIGTIME,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
CEOF

_ACEOF

  cat >>$CONFIG_STATUS <<\_ACEOF
  # Split the substitutions into bite-sized pieces for seds with
  # small command number limits, like on Digital OSF/1 and HP-UX.
  ac_max_sed_lines=48
  ac_sed_frag=1 # Number of current file.
  ac_beg=1 # First line for current file.
  ac_end=$ac_max_sed_lines # Line after last line for current file.
  ac_more_lines=:
  ac_sed_cmds=
  while $ac_more_lines; do
    if test $ac_beg -gt 1; then
      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
    else
      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
    fi
    if test ! -s $tmp/subs.frag; then
      ac_more_lines=false
    else
      # The purpose of the label and of the branching condition is to
      # speed up the sed processing (if there are no `@' at all, there
      # is no need to browse any of the substitutions).
      # These are the two extra sed commands mentioned above.
      (echo ':t
  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
      if test -z "$ac_sed_cmds"; then
	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
      else
	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
      fi
      ac_sed_frag=`expr $ac_sed_frag + 1`
      ac_beg=$ac_end
      ac_end=`expr $ac_end + $ac_max_sed_lines`
    fi
  done
  if test -z "$ac_sed_cmds"; then
    ac_sed_cmds=cat
  fi
fi # test -n "$CONFIG_FILES"

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
	cat >$tmp/stdin
	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
  esac

  if test x"$ac_file" != x-; then
    { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    rm -f "$ac_file"
  fi
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x"$ac_file" = x-; then
    configure_input=
  else
    configure_input="$ac_file.  "
  fi
  configure_input=$configure_input"Generated from `echo $ac_file_in |
				     sed 's,.*/,,'` by configure."

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
	 # Absolute (can't be DOS-style, as IFS=:)
	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 echo "$f";;
      *) # Relative
	 if test -f "$f"; then
	   # Build tree
	   echo "$f"
	 elif test -f "$srcdir/$f"; then
	   # Source tree
	   echo "$srcdir/$f"
	 else
	   # /dev/null tree
	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 fi;;
      esac
    done` || { (exit 1); exit 1; }
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
  sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
  rm -f $tmp/stdin
  if test x"$ac_file" != x-; then
    mv $tmp/out $ac_file
  else
    cat $tmp/out
    rm -f $tmp/out
  fi

done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF

#
# CONFIG_HEADER section.
#

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
ac_dB='[	 ].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t'

for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
	cat >$tmp/stdin
	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
	 # Absolute (can't be DOS-style, as IFS=:)
	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 # Do quote $f, to prevent DOS paths from being IFS'd.
	 echo "$f";;
      *) # Relative
	 if test -f "$f"; then
	   # Build tree
	   echo "$f"
	 elif test -f "$srcdir/$f"; then
	   # Source tree
	   echo "$srcdir/$f"
	 else
	   # /dev/null tree
	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 fi;;
      esac
    done` || { (exit 1); exit 1; }
  # Remove the trailing spaces.
  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in

_ACEOF

# Transform confdefs.h into two sed scripts, `conftest.defines' and
# `conftest.undefs', that substitutes the proper values into
# config.h.in to produce config.h.  The first handles `#define'
# templates, and the second `#undef' templates.
# And first: Protect against being on the right side of a sed subst in
# config.status.  Protect against being in an unquoted here document
# in config.status.
rm -f conftest.defines conftest.undefs
# Using a here document instead of a string reduces the quoting nightmare.
# Putting comments in sed scripts is not portable.
#
# `end' is used to avoid that the second main sed command (meant for
# 0-ary CPP macros) applies to n-ary macro definitions.
# See the Autoconf documentation for `clear'.
cat >confdef2sed.sed <<\_ACEOF
s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
t end
s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: end
_ACEOF
# If some macros were called several times there might be several times
# the same #defines, which is useless.  Nevertheless, we may not want to
# sort them, since we want the *last* AC-DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\_ACEOF
s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
_ACEOF

# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo '  :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
  # Write a limited-size here document to $tmp/defines.sed.
  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
  # Speed up: don't consider the non `#define' lines.
  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
  # Work around the forget-to-reset-the-flag bug.
  echo 't clr' >>$CONFIG_STATUS
  echo ': clr' >>$CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
  echo 'CEOF
  sed -f $tmp/defines.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
  rm -f conftest.defines
  mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo '  fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS

# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
  # Write a limited-size here document to $tmp/undefs.sed.
  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
  # Speed up: don't consider the non `#undef'
  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
  # Work around the forget-to-reset-the-flag bug.
  echo 't clr' >>$CONFIG_STATUS
  echo ': clr' >>$CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
  echo 'CEOF
  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
  rm -f conftest.undefs
  mv conftest.tail conftest.undefs
done
rm -f conftest.undefs

cat >>$CONFIG_STATUS <<\_ACEOF
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x"$ac_file" = x-; then
    echo "/* Generated by configure.  */" >$tmp/config.h
  else
    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
  fi
  cat $tmp/in >>$tmp/config.h
  rm -f $tmp/in
  if test x"$ac_file" != x-; then
    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
      { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

      rm -f $ac_file
      mv $tmp/config.h $ac_file
    fi
  else
    cat $tmp/config.h
    rm -f $tmp/config.h
  fi
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF

#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \