Newer
Older
sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
rm -f conftest.defines
mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo ' fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
# Write a limited-size here document to $tmp/undefs.sed.
echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#undef'
echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
25019
25020
25021
25022
25023
25024
25025
25026
25027
25028
25029
25030
25031
25032
25033
25034
25035
25036
25037
25038
25039
25040
25041
25042
25043
25044
25045
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/undefs.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
rm -f conftest.undefs
mv conftest.tail conftest.undefs
done
rm -f conftest.undefs
cat >>$CONFIG_STATUS <<\_ACEOF
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
if test x"$ac_file" = x-; then
echo "/* Generated by configure. */" >$tmp/config.h
else
echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
fi
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
rm -f $ac_file
mv $tmp/config.h $ac_file
fi
else
cat $tmp/config.h
rm -f $tmp/config.h
fi
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
25116
25117
25118
25119
25120
25121
25122
25123
25124
25125
25126
25127
25128
25129
25130
25131
25132
25133
25134
25135
25136
25137
25138
25139
25140
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
25141
25142
25143
25144
25145
25146
25147
25148
25149
25150
25151
25152
25153
25154
25155
25156
25157
25158
25159
25160
25161
25162
25163
25164
25165
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
25166
25167
25168
25169
25170
25171
25172
25173
25174
25175
25176
25177
25178
25179
25180
25181
25182
25183
25184
25185
25186
25187
25188
25189
25190
25191
25192
25193
25194
25195
25196
25197
25198
25199
25200
25201
25202
25203
25204
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile Makefile ;;
Makefile.common ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile.common Makefile.common ;;
lib/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Makefile lib/Makefile ;;
runtime/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/runtime/Makefile runtime/Makefile ;;
test/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile test/Makefile ;;
test/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile.tests test/Makefile.tests ;;
test/QMTest/llvm.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvm.py test/QMTest/llvm.py ;;
test/QMTest/llvmdb.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvmdb.py test/QMTest/llvmdb.py ;;
test/Programs/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile test/Programs/Makefile ;;
test/Programs/Makefile.programs ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile.programs test/Programs/Makefile.programs ;;
test/Programs/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile.tests test/Programs/Makefile.tests ;;
test/Programs/TEST.aa.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.aa.Makefile test/Programs/TEST.aa.Makefile ;;
test/Programs/TEST.dsgraph.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.report test/Programs/TEST.dsgraph.report ;;
test/Programs/TEST.aa.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.aa.report test/Programs/TEST.aa.report ;;
test/Programs/TEST.example.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.example.Makefile test/Programs/TEST.example.Makefile ;;
test/Programs/TEST.nightly.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.nightly.Makefile test/Programs/TEST.nightly.Makefile ;;
test/Programs/TEST.buildrepo.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.buildrepo.Makefile test/Programs/TEST.buildrepo.Makefile ;;
test/Programs/TEST.jit.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.jit.Makefile test/Programs/TEST.jit.Makefile ;;
test/Programs/TEST.nightly.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.nightly.report test/Programs/TEST.nightly.report ;;
test/Programs/TEST.dsgraph.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.Makefile test/Programs/TEST.dsgraph.Makefile ;;
test/Programs/TEST.jit.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.jit.report test/Programs/TEST.jit.report ;;
test/Programs/TEST.typesafe.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.typesafe.Makefile test/Programs/TEST.typesafe.Makefile ;;
test/Programs/TEST.dsgraph.gnuplot ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.gnuplot test/Programs/TEST.dsgraph.gnuplot ;;
test/Programs/TEST.vtl.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.vtl.Makefile test/Programs/TEST.vtl.Makefile ;;
test/Programs/External/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/Makefile test/Programs/External/Makefile ;;
test/Programs/External/SPEC/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile test/Programs/External/SPEC/Makefile ;;
John Criswell
committed
test/Programs/External/SPEC/Makefile.spec ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec test/Programs/External/SPEC/Makefile.spec ;;
Alkis Evlogimenos
committed
test/Programs/External/SPEC/Makefile.spec2000 ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec2000 test/Programs/External/SPEC/Makefile.spec2000 ;;
test/Programs/External/SPEC/Makefile.spec95 ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec95 test/Programs/External/SPEC/Makefile.spec95 ;;
test/Programs/MultiSource/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Makefile test/Programs/MultiSource/Makefile ;;
test/Programs/MultiSource/Makefile.multisrc ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Makefile.multisrc test/Programs/MultiSource/Makefile.multisrc ;;
test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in ;;
test/Programs/SingleSource/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/Makefile test/Programs/SingleSource/Makefile ;;
test/Programs/SingleSource/Makefile.singlesrc ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/Makefile.singlesrc test/Programs/SingleSource/Makefile.singlesrc ;;
Alkis Evlogimenos
committed
test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile ;;
tools/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/Makefile tools/Makefile ;;
utils/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/utils/Makefile utils/Makefile ;;
projects/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/projects/Makefile projects/Makefile ;;
esac
done
_ACEOF
25263
25264
25265
25266
25267
25268
25269
25270
25271
25272
25273
25274
25275
25276
25277
25278
25279
25280
25281
cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
John Criswell
committed
25293
25294
25295
25296
25297
25298
25299
25300
25301
25302
25303
25304
25305
25306
25307
25308
25309
25310
25311
25312
25313
25314
25315
25316
25317
25318
25319
25320
25321
25322
25323
25324
25325
25326
25327
25328
25329
25330
25331
25332
25333
25334
25335
25336
25337
25338
25339
25340
25341
25342
25343
25344
25345
25346
25347
25348
25349
#
# CONFIG_SUBDIRS section.
#
if test "$no_recursion" != yes; then
# Remove --cache-file and --srcdir arguments so they do not pile up.
ac_sub_configure_args=
ac_prev=
for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
*) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"
ac_popdir=`pwd`
for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
test -d $srcdir/$ac_dir || continue
{ echo "$as_me:$LINENO: configuring in $ac_dir" >&5
echo "$as_me: configuring in $ac_dir" >&6;}
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
John Criswell
committed
25354
25355
25356
25357
25358
25359
25360
25361
25362
25363
25364
25365
25366
25367
25368
25369
25370
25371
25372
25373
25374
25375
25376
25377
25378
25379
25380
25381
25382
25383
25384
25385
25386
25387
25388
25389
25390
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
25391
25392
25393
25394
25395
25396
25397
25398
25399
25400
25401
25402
25403
25404
25405
25406
25407
25408
25409
25410
25411
25412
25413
25414
25415
25416
25417
25418
25419
25420
25421
25422
25423
25424
25425
25426
25427
25428
25429
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
John Criswell
committed
25430
25431
25432
25433
25434
25435
25436
25437
25438
25439
25440
25441
25442
25443
25444
25445
25446
25447
25448
25449
25450
25451
25452
cd $ac_dir
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_srcdir/configure.gnu; then
ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
elif test -f $ac_srcdir/configure; then
ac_sub_configure="$SHELL '$ac_srcdir/configure'"
elif test -f $ac_srcdir/configure.in; then
ac_sub_configure=$ac_configure
else
{ echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
ac_sub_configure=
fi
# The recursion is here.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
ac_sub_cache_file=$ac_top_builddir$cache_file ;;
John Criswell
committed
esac
{ echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
eval $ac_sub_configure $ac_sub_configure_args \
--cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
John Criswell
committed
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
{ (exit 1); exit 1; }; }
fi
cd $ac_popdir
done
fi
if test $llvmgccwarn = yes
then
{ echo "$as_me:$LINENO: WARNING: ***** llvm C/C++ front end was not found, or does not" >&5
echo "$as_me: WARNING: ***** llvm C/C++ front end was not found, or does not" >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** appear to be working." >&5
echo "$as_me: WARNING: ***** appear to be working." >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** " >&5
echo "$as_me: WARNING: ***** " >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** Please check configure's --with-llvmgccdir option." >&5
echo "$as_me: WARNING: ***** Please check configure's --with-llvmgccdir option." >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&5
echo "$as_me: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** but you should be able to build the llvm tools." >&5
echo "$as_me: WARNING: ***** but you should be able to build the llvm tools." >&2;}
fi