configure

$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
  esac

  if test x"$ac_file" != x-; then
    { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    rm -f "$ac_file"
  fi
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x"$ac_file" = x-; then
    configure_input=
  else
    configure_input="$ac_file.  "
  fi
  configure_input=$configure_input"Generated from `echo $ac_file_in |
				     sed 's,.*/,,'` by configure."

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
	 # Absolute (can't be DOS-style, as IFS=:)
	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 echo "$f";;
      *) # Relative
	 if test -f "$f"; then
	   # Build tree
	   echo "$f"
	 elif test -f "$srcdir/$f"; then
	   # Source tree
	   echo "$srcdir/$f"
	 else
	   # /dev/null tree
	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 fi;;
      esac
    done` || { (exit 1); exit 1; }
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
  sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
  rm -f $tmp/stdin
  if test x"$ac_file" != x-; then
    mv $tmp/out $ac_file
  else
    cat $tmp/out
    rm -f $tmp/out
  fi

done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF

#
# CONFIG_HEADER section.
#

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
ac_dB='[	 ].*$,\1#\2'
ac_dC=' '
ac_dD=',;t'
# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
ac_uB='$,\1#\2define\3'
ac_uC=' '
ac_uD=',;t'

for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case $ac_file in
  - | *:- | *:-:* ) # input from stdin
	cat >$tmp/stdin
	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
  * )   ac_file_in=$ac_file.in ;;
  esac

  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}

  # First look for the input files in the build tree, otherwise in the
  # src tree.
  ac_file_inputs=`IFS=:
    for f in $ac_file_in; do
      case $f in
      -) echo $tmp/stdin ;;
      [\\/$]*)
	 # Absolute (can't be DOS-style, as IFS=:)
	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 # Do quote $f, to prevent DOS paths from being IFS'd.
	 echo "$f";;
      *) # Relative
	 if test -f "$f"; then
	   # Build tree
	   echo "$f"
	 elif test -f "$srcdir/$f"; then
	   # Source tree
	   echo "$srcdir/$f"
	 else
	   # /dev/null tree
	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
echo "$as_me: error: cannot find input file: $f" >&2;}
   { (exit 1); exit 1; }; }
	 fi;;
      esac
    done` || { (exit 1); exit 1; }
  # Remove the trailing spaces.
  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in

_ACEOF

# Transform confdefs.h into two sed scripts, `conftest.defines' and
# `conftest.undefs', that substitutes the proper values into
# config.h.in to produce config.h.  The first handles `#define'
# templates, and the second `#undef' templates.
# And first: Protect against being on the right side of a sed subst in
# config.status.  Protect against being in an unquoted here document
# in config.status.
rm -f conftest.defines conftest.undefs
# Using a here document instead of a string reduces the quoting nightmare.
# Putting comments in sed scripts is not portable.
#
# `end' is used to avoid that the second main sed command (meant for
# 0-ary CPP macros) applies to n-ary macro definitions.
# See the Autoconf documentation for `clear'.
cat >confdef2sed.sed <<\_ACEOF
s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
t end
s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: end
_ACEOF
# If some macros were called several times there might be several times
# the same #defines, which is useless.  Nevertheless, we may not want to
# sort them, since we want the *last* AC-DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\_ACEOF
s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
_ACEOF

# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo '  :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
  # Write a limited-size here document to $tmp/defines.sed.
  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
  # Speed up: don't consider the non `#define' lines.
  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
  # Work around the forget-to-reset-the-flag bug.
  echo 't clr' >>$CONFIG_STATUS
  echo ': clr' >>$CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
  echo 'CEOF
  sed -f $tmp/defines.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
  rm -f conftest.defines
  mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo '  fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS

# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
  # Write a limited-size here document to $tmp/undefs.sed.
  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
  # Speed up: don't consider the non `#undef'
  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
  # Work around the forget-to-reset-the-flag bug.
  echo 't clr' >>$CONFIG_STATUS
  echo ': clr' >>$CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
  echo 'CEOF
  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
  rm -f $tmp/in
  mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
  rm -f conftest.undefs
  mv conftest.tail conftest.undefs
done
rm -f conftest.undefs

cat >>$CONFIG_STATUS <<\_ACEOF
  # Let's still pretend it is `configure' which instantiates (i.e., don't
  # use $as_me), people would be surprised to read:
  #    /* config.h.  Generated by config.status.  */
  if test x"$ac_file" = x-; then
    echo "/* Generated by configure.  */" >$tmp/config.h
  else
    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
  fi
  cat $tmp/in >>$tmp/config.h
  rm -f $tmp/in
  if test x"$ac_file" != x-; then
    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
    else
      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
      { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

      rm -f $ac_file
      mv $tmp/config.h $ac_file
    fi
  else
    cat $tmp/config.h
    rm -f $tmp/config.h
  fi
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF

#
# CONFIG_LINKS section.
#

for ac_file in : $CONFIG_LINKS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`

  { echo "$as_me:$LINENO: linking $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: linking $srcdir/$ac_source to $ac_dest" >&6;}

  if test ! -r $srcdir/$ac_source; then
    { { echo "$as_me:$LINENO: error: $srcdir/$ac_source: file not found" >&5
echo "$as_me: error: $srcdir/$ac_source: file not found" >&2;}
   { (exit 1); exit 1; }; }
  fi
  rm -f $ac_dest

  # Make relative symlinks.
  ac_dest_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_dest" : 'X\(//\)[^/]' \| \
	 X"$ac_dest" : 'X\(//\)$' \| \
	 X"$ac_dest" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dest_dir"
  else
    as_dir="$ac_dest_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dest_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dest_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dest_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dest_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dest_dir";;
*)
  case "$ac_dest_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dest_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dest_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  case $srcdir in
  [\\/$]* | ?:[\\/]* ) ac_rel_source=$srcdir/$ac_source ;;
      *) ac_rel_source=$ac_top_builddir$srcdir/$ac_source ;;
  esac

  # Try a symlink, then a hard link, then a copy.
  ln -s $ac_rel_source $ac_dest 2>/dev/null ||
    ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
    cp -p $srcdir/$ac_source $ac_dest ||
    { { echo "$as_me:$LINENO: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&2;}
   { (exit 1); exit 1; }; }
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF

#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_dest" : 'X\(//\)[^/]' \| \
	 X"$ac_dest" : 'X\(//\)$' \| \
	 X"$ac_dest" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
  case $ac_dest in
    Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile Makefile ;;
    Makefile.common ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile.common Makefile.common ;;
    examples/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/examples/Makefile examples/Makefile ;;
    lib/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Makefile lib/Makefile ;;
    runtime/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/runtime/Makefile runtime/Makefile ;;
    test/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile test/Makefile ;;
    test/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile.tests test/Makefile.tests ;;
    tools/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/Makefile tools/Makefile ;;
    utils/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/utils/Makefile utils/Makefile ;;
    projects/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/projects/Makefile projects/Makefile ;;
  esac
done
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF

{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save


# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || { (exit 1); exit 1; }
fi

#
# CONFIG_SUBDIRS section.
#
if test "$no_recursion" != yes; then

  # Remove --cache-file and --srcdir arguments so they do not pile up.
  ac_sub_configure_args=
  ac_prev=
  for ac_arg in $ac_configure_args; do
    if test -n "$ac_prev"; then
      ac_prev=
      continue
    fi
    case $ac_arg in
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
      ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
    | --c=*)
      ;;
    --config-cache | -C)
      ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
      ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
      ;;
    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
      ac_prev=prefix ;;
    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
      ;;
    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
    esac
  done

  # Always prepend --prefix to ensure using the same prefix
  # in subdir configurations.
  ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"

  ac_popdir=`pwd`
  for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue

    # Do not complain, so a configure script can configure whichever
    # parts of a large source tree are present.
    test -d $srcdir/$ac_dir || continue

    { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
echo "$as_me: configuring in $ac_dir" >&6;}
    { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

    ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


    cd $ac_dir

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_srcdir/configure.gnu; then
      ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
    elif test -f $ac_srcdir/configure; then
      ac_sub_configure="$SHELL '$ac_srcdir/configure'"
    elif test -f $ac_srcdir/configure.in; then
      ac_sub_configure=$ac_configure
    else
      { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
      ac_sub_configure=
    fi

    # The recursion is here.
    if test -n "$ac_sub_configure"; then
      # Make the cache file name correct relative to the subdirectory.
      case $cache_file in
      [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
      *) # Relative path.
	ac_sub_cache_file=$ac_top_builddir$cache_file ;;
      esac

      { echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
      # The eval makes quoting arguments work.
      eval $ac_sub_configure $ac_sub_configure_args \
	   --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
	{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
   { (exit 1); exit 1; }; }
    fi

    cd $ac_popdir
  done
fi


if test "$llvm_cv_llvmgcc_sanity" = "no" ; then
 { echo "$as_me:$LINENO: WARNING: ***** llvm-gcc/llvm-g++ was not found, or does not appear to be " >&5
echo "$as_me: WARNING: ***** llvm-gcc/llvm-g++ was not found, or does not appear to be " >&2;}
 { echo "$as_me:$LINENO: WARNING: ***** working. Please make sure you have llvmgcc and llvmg++ in" >&5
echo "$as_me: WARNING: ***** working. Please make sure you have llvmgcc and llvmg++ in" >&2;}
 { echo "$as_me:$LINENO: WARNING: ***** your path before configuring LLVM. The runtime libraries" >&5
echo "$as_me: WARNING: ***** your path before configuring LLVM. The runtime libraries" >&2;}
 { echo "$as_me:$LINENO: WARNING: ***** (llvm/runtime) will not be built but you should be able to" >&5
echo "$as_me: WARNING: ***** (llvm/runtime) will not be built but you should be able to" >&2;}
 { echo "$as_me:$LINENO: WARNING: ***** build the llvm tools." >&5
echo "$as_me: WARNING: ***** build the llvm tools." >&2;}
fi