configure

#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  # It does; now see whether it defined to BIG_ENDIAN or not.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <sys/types.h>
#include <sys/param.h>

int
main ()
{
#if BYTE_ORDER != BIG_ENDIAN
 not big endian
#endif

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  ac_cv_c_bigendian=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	ac_cv_c_bigendian=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	# It does not; compile a test program.
if test "$cross_compiling" = yes; then
  # try to guess the endianness by grepping values into an object file
  ac_cv_c_bigendian=unknown
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
int
main ()
{
 _ascii (); _ebcdic ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && {
	 test -z "$ac_c_werror_flag" ||
	 test ! -s conftest.err
       } && test -s conftest.$ac_objext; then
  if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
  ac_cv_c_bigendian=yes
fi
if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
  if test "$ac_cv_c_bigendian" = unknown; then
    ac_cv_c_bigendian=no
  else
    # finding both strings is unlikely to happen, but who knows?
    ac_cv_c_bigendian=unknown
  fi
fi
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5


fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
$ac_includes_default
int
main ()
{

  /* Are we little or big endian?  From Harbison&Steele.  */
  union
  {
    long int l;
    char c[sizeof (long int)];
  } u;
  u.l = 1;
  return u.c[sizeof (long int) - 1] == 1;

  ;
  return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_c_bigendian=no
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
ac_cv_c_bigendian=yes
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi


fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
echo "${ECHO_T}$ac_cv_c_bigendian" >&6; }
case $ac_cv_c_bigendian in
  yes)
    ENDIAN=big
 ;;
  no)
    ENDIAN=little
 ;;
  *)
    { { echo "$as_me:$LINENO: error: unknown endianness
presetting ac_cv_c_bigendian=no (or yes) will help" >&5
echo "$as_me: error: unknown endianness
presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
   { (exit 1); exit 1; }; } ;;
esac


if test "$cross_compiling" = yes; then
  LLVM_CROSS_COMPILING=1


{ echo "$as_me:$LINENO: checking for executable suffix on build platform" >&5
echo $ECHO_N "checking for executable suffix on build platform... $ECHO_C" >&6; }
if test "${ac_cv_build_exeext+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
  ac_cv_build_exeext=.exe
else
  ac_build_prefix=${build_alias}-

  # Extract the first word of "${ac_build_prefix}gcc", so it can be a program name with args.
set dummy ${ac_build_prefix}gcc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_BUILD_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$BUILD_CC"; then
  ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_BUILD_CC="${ac_build_prefix}gcc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
BUILD_CC=$ac_cv_prog_BUILD_CC
if test -n "$BUILD_CC"; then
  { echo "$as_me:$LINENO: result: $BUILD_CC" >&5
echo "${ECHO_T}$BUILD_CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


  if test -z "$BUILD_CC"; then
     # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_BUILD_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$BUILD_CC"; then
  ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_BUILD_CC="gcc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
BUILD_CC=$ac_cv_prog_BUILD_CC
if test -n "$BUILD_CC"; then
  { echo "$as_me:$LINENO: result: $BUILD_CC" >&5
echo "${ECHO_T}$BUILD_CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


     if test -z "$BUILD_CC"; then
       # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_BUILD_CC+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$BUILD_CC"; then
  ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
else
  ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
       ac_prog_rejected=yes
       continue
     fi
    ac_cv_prog_BUILD_CC="cc"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_BUILD_CC
  shift
  if test $# != 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set BUILD_CC to just the basename; use the full file name.
    shift
    ac_cv_prog_BUILD_CC="$as_dir/$ac_word${1+' '}$@"
  fi
fi
fi
fi
BUILD_CC=$ac_cv_prog_BUILD_CC
if test -n "$BUILD_CC"; then
  { echo "$as_me:$LINENO: result: $BUILD_CC" >&5
echo "${ECHO_T}$BUILD_CC" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


     fi
  fi
  test -z "$BUILD_CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
   { (exit 1); exit 1; }; }
  ac_build_link='${BUILD_CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
  rm -f conftest*
  echo 'int main () { return 0; }' > conftest.$ac_ext
  ac_cv_build_exeext=
  if { (eval echo "$as_me:$LINENO: \"$ac_build_link\"") >&5
  (eval $ac_build_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
    for file in conftest.*; do
      case $file in
      *.c | *.o | *.obj | *.dSYM) ;;
      *) ac_cv_build_exeext=`echo $file | sed -e s/conftest//` ;;
      esac
    done
  else
    { { echo "$as_me:$LINENO: error: installation or configuration problem: compiler cannot create executables." >&5
echo "$as_me: error: installation or configuration problem: compiler cannot create executables." >&2;}
   { (exit 1); exit 1; }; }
  fi
  rm -f conftest*
  test x"${ac_cv_build_exeext}" = x && ac_cv_build_exeext=blank
fi
fi

BUILD_EXEEXT=""
test x"${ac_cv_build_exeext}" != xblank && BUILD_EXEEXT=${ac_cv_build_exeext}
{ echo "$as_me:$LINENO: result: ${ac_cv_build_exeext}" >&5
echo "${ECHO_T}${ac_cv_build_exeext}" >&6; }
ac_build_exeext=$BUILD_EXEEXT

  ac_build_prefix=${build_alias}-
  # Extract the first word of "${ac_build_prefix}g++", so it can be a program name with args.
set dummy ${ac_build_prefix}g++; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_BUILD_CXX+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$BUILD_CXX"; then
  ac_cv_prog_BUILD_CXX="$BUILD_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_BUILD_CXX="${ac_build_prefix}g++"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
BUILD_CXX=$ac_cv_prog_BUILD_CXX
if test -n "$BUILD_CXX"; then
  { echo "$as_me:$LINENO: result: $BUILD_CXX" >&5
echo "${ECHO_T}$BUILD_CXX" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


  if test -z "$BUILD_CXX"; then
     # Extract the first word of "g++", so it can be a program name with args.
set dummy g++; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_BUILD_CXX+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$BUILD_CXX"; then
  ac_cv_prog_BUILD_CXX="$BUILD_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    ac_cv_prog_BUILD_CXX="g++"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

fi
fi
BUILD_CXX=$ac_cv_prog_BUILD_CXX
if test -n "$BUILD_CXX"; then
  { echo "$as_me:$LINENO: result: $BUILD_CXX" >&5
echo "${ECHO_T}$BUILD_CXX" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


     if test -z "$BUILD_CXX"; then
       # Extract the first word of "c++", so it can be a program name with args.
set dummy c++; ac_word=$2
{ echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_BUILD_CXX+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$BUILD_CXX"; then
  ac_cv_prog_BUILD_CXX="$BUILD_CXX" # Let the user override the test.
else
  ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/c++"; then
       ac_prog_rejected=yes
       continue
     fi
    ac_cv_prog_BUILD_CXX="c++"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done
IFS=$as_save_IFS

if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_BUILD_CXX
  shift
  if test $# != 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set BUILD_CXX to just the basename; use the full file name.
    shift
    ac_cv_prog_BUILD_CXX="$as_dir/$ac_word${1+' '}$@"
  fi
fi
fi
fi
BUILD_CXX=$ac_cv_prog_BUILD_CXX
if test -n "$BUILD_CXX"; then
  { echo "$as_me:$LINENO: result: $BUILD_CXX" >&5
echo "${ECHO_T}$BUILD_CXX" >&6; }
else
  { echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi


     fi
  fi
else
  LLVM_CROSS_COMPILING=0

fi

if test -d "CVS" -o -d "${srcdir}/CVS" -o -d ".svn" -o -d "${srcdir}/.svn"; then
  cvsbuild="yes"
  optimize="no"
  CVSBUILD=CVSBUILD=1

else
  cvsbuild="no"
  optimize="yes"
fi


# Check whether --enable-optimized was given.
if test "${enable_optimized+set}" = set; then
  enableval=$enable_optimized;
else
  enableval=$optimize
fi

if test ${enableval} = "no" ; then
  ENABLE_OPTIMIZED=

else
  ENABLE_OPTIMIZED=ENABLE_OPTIMIZED=1

fi

# Check whether --enable-assertions was given.
if test "${enable_assertions+set}" = set; then
  enableval=$enable_assertions;
else
  enableval="yes"
fi

if test ${enableval} = "yes" ; then
  DISABLE_ASSERTIONS=

else
  DISABLE_ASSERTIONS=DISABLE_ASSERTIONS=1

fi

# Check whether --enable-expensive-checks was given.
if test "${enable_expensive_checks+set}" = set; then
  enableval=$enable_expensive_checks;
else
  enableval="no"
fi

if test ${enableval} = "yes" ; then
  ENABLE_EXPENSIVE_CHECKS=ENABLE_EXPENSIVE_CHECKS=1

  EXPENSIVE_CHECKS=yes

else
  ENABLE_EXPENSIVE_CHECKS=

  EXPENSIVE_CHECKS=no

fi

# Check whether --enable-debug-runtime was given.
if test "${enable_debug_runtime+set}" = set; then
  enableval=$enable_debug_runtime;
else
  enableval=no
fi

if test ${enableval} = "no" ; then
  DEBUG_RUNTIME=

else
  DEBUG_RUNTIME=DEBUG_RUNTIME=1

fi

# Check whether --enable-jit was given.
if test "${enable_jit+set}" = set; then
  enableval=$enable_jit;
else
  enableval=default
fi

if test ${enableval} = "no"
then
  JIT=

else
  case "$llvm_cv_target_arch" in
    x86)     TARGET_HAS_JIT=1
 ;;
    Sparc)   TARGET_HAS_JIT=0
 ;;
    PowerPC) TARGET_HAS_JIT=1
 ;;
    x86_64)  TARGET_HAS_JIT=1
 ;;
    Alpha)   TARGET_HAS_JIT=1
 ;;
    IA64)    TARGET_HAS_JIT=0
 ;;
    ARM)     TARGET_HAS_JIT=0
 ;;
    Mips)    TARGET_HAS_JIT=0
 ;;
    PIC16)   TARGET_HAS_JIT=0
 ;;
    XCore)   TARGET_HAS_JIT=0
 ;;
    *)       TARGET_HAS_JIT=0
 ;;
  esac
fi

# Check whether --enable-doxygen was given.
if test "${enable_doxygen+set}" = set; then
  enableval=$enable_doxygen;
else
  enableval=default
fi

case "$enableval" in
  yes) ENABLE_DOXYGEN=1
 ;;
  no)  ENABLE_DOXYGEN=0
 ;;
  default) ENABLE_DOXYGEN=0
 ;;
  *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-doxygen. Use \"yes\" or \"no\"" >&5
echo "$as_me: error: Invalid setting for --enable-doxygen. Use \"yes\" or \"no\"" >&2;}
   { (exit 1); exit 1; }; } ;;
esac

# Check whether --enable-threads was given.
if test "${enable_threads+set}" = set; then
  enableval=$enable_threads;
else
  enableval=default
fi

case "$enableval" in
  yes) ENABLE_THREADS=1
 ;;
  no)  ENABLE_THREADS=0
 ;;
  default) ENABLE_THREADS=1
 ;;
  *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-threads. Use \"yes\" or \"no\"" >&5
echo "$as_me: error: Invalid setting for --enable-threads. Use \"yes\" or \"no\"" >&2;}
   { (exit 1); exit 1; }; } ;;
esac

cat >>confdefs.h <<_ACEOF
#define ENABLE_THREADS $ENABLE_THREADS
_ACEOF


# Check whether --enable-pic was given.
if test "${enable_pic+set}" = set; then
  enableval=$enable_pic;
else
  enableval=default
fi

case "$enableval" in
  yes) ENABLE_PIC=1
 ;;
  no)  ENABLE_PIC=0
 ;;
  default) ENABLE_PIC=0
 ;;
  *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-pic. Use \"yes\" or \"no\"" >&5
echo "$as_me: error: Invalid setting for --enable-pic. Use \"yes\" or \"no\"" >&2;}
   { (exit 1); exit 1; }; } ;;
esac

cat >>confdefs.h <<_ACEOF
#define ENABLE_PIC $ENABLE_PIC
_ACEOF


TARGETS_TO_BUILD=""
# Check whether --enable-targets was given.
if test "${enable_targets+set}" = set; then
  enableval=$enable_targets;
else
  enableval=all
fi

case "$enableval" in
  all) TARGETS_TO_BUILD="X86 Sparc PowerPC Alpha IA64 ARM Mips CellSPU PIC16 XCore CBackend MSIL CppBackend" ;;
  host-only)
    case "$llvm_cv_target_arch" in
      x86)     TARGETS_TO_BUILD="X86" ;;
      x86_64)  TARGETS_TO_BUILD="X86" ;;
      Sparc)   TARGETS_TO_BUILD="Sparc" ;;
      PowerPC) TARGETS_TO_BUILD="PowerPC" ;;
      Alpha)   TARGETS_TO_BUILD="Alpha" ;;
      IA64)    TARGETS_TO_BUILD="IA64" ;;
      ARM)     TARGETS_TO_BUILD="ARM" ;;
      Mips)    TARGETS_TO_BUILD="Mips" ;;
      CellSPU|SPU) TARGETS_TO_BUILD="CellSPU" ;;
      PIC16)   TARGETS_TO_BUILD="PIC16" ;;
      XCore)   TARGETS_TO_BUILD="XCore" ;;
      *)       { { echo "$as_me:$LINENO: error: Can not set target to build" >&5
echo "$as_me: error: Can not set target to build" >&2;}
   { (exit 1); exit 1; }; } ;;
    esac
    ;;
  *)for a_target in `echo $enableval|sed -e 's/,/ /g' ` ; do
      case "$a_target" in
        x86)     TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
        x86_64)  TARGETS_TO_BUILD="X86 $TARGETS_TO_BUILD" ;;
        sparc)   TARGETS_TO_BUILD="Sparc $TARGETS_TO_BUILD" ;;
        powerpc) TARGETS_TO_BUILD="PowerPC $TARGETS_TO_BUILD" ;;
        alpha)   TARGETS_TO_BUILD="Alpha $TARGETS_TO_BUILD" ;;
        ia64)    TARGETS_TO_BUILD="IA64 $TARGETS_TO_BUILD" ;;
        arm)     TARGETS_TO_BUILD="ARM $TARGETS_TO_BUILD" ;;
        mips)    TARGETS_TO_BUILD="Mips $TARGETS_TO_BUILD" ;;
        spu)     TARGETS_TO_BUILD="CellSPU $TARGETS_TO_BUILD" ;;
        pic16)   TARGETS_TO_BUILD="PIC16 $TARGETS_TO_BUILD" ;;
        xcore)   TARGETS_TO_BUILD="XCore $TARGETS_TO_BUILD" ;;
        cbe)     TARGETS_TO_BUILD="CBackend $TARGETS_TO_BUILD" ;;
        msil)    TARGETS_TO_BUILD="MSIL $TARGETS_TO_BUILD" ;;
        cpp)     TARGETS_TO_BUILD="CppBackend $TARGETS_TO_BUILD" ;;
        *) { { echo "$as_me:$LINENO: error: Unrecognized target $a_target" >&5
echo "$as_me: error: Unrecognized target $a_target" >&2;}
   { (exit 1); exit 1; }; } ;;
      esac
  done
  ;;
esac
TARGETS_TO_BUILD=$TARGETS_TO_BUILD


# Check whether --enable-cbe-printf-a was given.
if test "${enable_cbe_printf_a+set}" = set; then
  enableval=$enable_cbe_printf_a;
else
  enableval=default
fi

case "$enableval" in
  yes) ENABLE_CBE_PRINTF_A=1
 ;;
  no)  ENABLE_CBE_PRINTF_A=0
 ;;
  default)  ENABLE_CBE_PRINTF_A=1
 ;;
  *) { { echo "$as_me:$LINENO: error: Invalid setting for --enable-cbe-printf-a. Use \"yes\" or \"no\"" >&5
echo "$as_me: error: Invalid setting for --enable-cbe-printf-a. Use \"yes\" or \"no\"" >&2;}
   { (exit 1); exit 1; }; } ;;
esac

cat >>confdefs.h <<_ACEOF
#define ENABLE_CBE_PRINTF_A $ENABLE_CBE_PRINTF_A
_ACEOF



# Check whether --with-llvmgccdir was given.
if test "${with_llvmgccdir+set}" = set; then
  withval=$with_llvmgccdir;
else
  withval=default
fi

case "$withval" in
  default) WITH_LLVMGCCDIR=default ;;
  /* | [A-Za-z]:[\\/]*)      WITH_LLVMGCCDIR=$withval ;;
  *) { { echo "$as_me:$LINENO: error: Invalid path for --with-llvmgccdir. Provide full path" >&5
echo "$as_me: error: Invalid path for --with-llvmgccdir. Provide full path" >&2;}
   { (exit 1); exit 1; }; } ;;
esac


# Check whether --with-llvmgcc was given.
if test "${with_llvmgcc+set}" = set; then
  withval=$with_llvmgcc; LLVMGCC=$with_llvmgcc
      WITH_LLVMGCCDIR=""
fi



# Check whether --with-llvmgxx was given.
if test "${with_llvmgxx+set}" = set; then
  withval=$with_llvmgxx; LLVMGXX=$with_llvmgxx
    WITH_LLVMGCCDIR=""
fi


if test -n "$LLVMGCC" && test -z "$LLVMGXX"; then
   { { echo "$as_me:$LINENO: error: Invalid llvm-g++. Use --with-llvmgxx when --with-llvmgcc is used" >&5
echo "$as_me: error: Invalid llvm-g++. Use --with-llvmgxx when --with-llvmgcc is used" >&2;}
   { (exit 1); exit 1; }; };
fi

if test -n "$LLVMGXX" && test -z "$LLVMGCC"; then
   { { echo "$as_me:$LINENO: error: Invalid llvm-gcc. Use --with-llvmgcc when --with-llvmgxx is used" >&5
echo "$as_me: error: Invalid llvm-gcc. Use --with-llvmgcc when --with-llvmgxx is used" >&2;}
   { (exit 1); exit 1; }; };
fi


# Check whether --with-extra-options was given.
if test "${with_extra_options+set}" = set; then
  withval=$with_extra_options;
else
  withval=default
fi

case "$withval" in
  default) EXTRA_OPTIONS= ;;
  *) EXTRA_OPTIONS=$withval ;;
esac
EXTRA_OPTIONS=$EXTRA_OPTIONS


# Check whether --enable-bindings was given.
if test "${enable_bindings+set}" = set; then
  enableval=$enable_bindings;
else
  enableval=default
fi

BINDINGS_TO_BUILD=""
case "$enableval" in
  yes | default | auto) BINDINGS_TO_BUILD="auto" ;;
  all ) BINDINGS_TO_BUILD="ocaml" ;;
  none | no) BINDINGS_TO_BUILD="" ;;
  *)for a_binding in `echo $enableval|sed -e 's/,/ /g' ` ; do
      case "$a_binding" in
        ocaml) BINDINGS_TO_BUILD="ocaml $BINDINGS_TO_BUILD" ;;
        *) { { echo "$as_me:$LINENO: error: Unrecognized binding $a_binding" >&5
echo "$as_me: error: Unrecognized binding $a_binding" >&2;}
   { (exit 1); exit 1; }; } ;;
      esac
  done
  ;;
esac


# Check whether --with-ocaml-libdir was given.
if test "${with_ocaml_libdir+set}" = set; then
  withval=$with_ocaml_libdir;
else
  withval=auto
fi

case "$withval" in
  auto) with_ocaml_libdir="$withval" ;;
  /* | [A-Za-z]:[\\/]*) with_ocaml_libdir="$withval" ;;
  *) { { echo "$as_me:$LINENO: error: Invalid path for --with-ocaml-libdir. Provide full path" >&5
echo "$as_me: error: Invalid path for --with-ocaml-libdir. Provide full path" >&2;}
   { (exit 1); exit 1; }; } ;;
esac


ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
  if test "${ac_cv_prog_CPP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
      # Double quotes because CPP needs to be expanded
    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
    do
      ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
  # <limits.h> exists even on freestanding compilers.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
		     Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Broken: fails on valid input.
continue
fi

rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether nonexistent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null && {
	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
	 test ! -s conftest.err
       }; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Passes both tests.
ac_preproc_ok=:
break
fi

rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  break