configure

#   ifdef EXEC_PAGESIZE
#    define getpagesize() EXEC_PAGESIZE
#   else /* no EXEC_PAGESIZE */
#    ifdef NBPG
#     define getpagesize() NBPG * CLSIZE
#     ifndef CLSIZE
#      define CLSIZE 1
#     endif /* no CLSIZE */
#    else /* no NBPG */
#     ifdef NBPC
#      define getpagesize() NBPC
#     else /* no NBPC */
#      ifdef PAGESIZE
#       define getpagesize() PAGESIZE
#      endif /* PAGESIZE */
#     endif /* no NBPC */
#    endif /* no NBPG */
#   endif /* no EXEC_PAGESIZE */
#  else /* no HAVE_SYS_PARAM_H */
#   define getpagesize() 8192	/* punt totally */
#  endif /* no HAVE_SYS_PARAM_H */
# endif /* no _SC_PAGESIZE */

#endif /* no HAVE_GETPAGESIZE */

int
main ()
{
  char *data, *data2, *data3;
  int i, pagesize;
  int fd;

  pagesize = getpagesize ();

  /* First, make a file with some known garbage in it. */
  data = (char *) malloc (pagesize);
  if (!data)
    return 1;
  for (i = 0; i < pagesize; ++i)
    *(data + i) = rand ();
  umask (0);
  fd = creat ("conftest.mmap", 0600);
  if (fd < 0)
    return 1;
  if (write (fd, data, pagesize) != pagesize)
    return 1;
  close (fd);

  /* Next, try to mmap the file at a fixed address which already has
     something else allocated at it.  If we can, also make sure that
     we see the same garbage.  */
  fd = open ("conftest.mmap", O_RDWR);
  if (fd < 0)
    return 1;
  data2 = (char *) malloc (2 * pagesize);
  if (!data2)
    return 1;
  data2 += (pagesize - ((long int) data2 & (pagesize - 1))) & (pagesize - 1);
  if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
		     MAP_PRIVATE | MAP_FIXED, fd, 0L))
    return 1;
  for (i = 0; i < pagesize; ++i)
    if (*(data + i) != *(data2 + i))
      return 1;

  /* Finally, make sure that changes to the mapped area do not
     percolate back to the file as seen by read().  (This is a bug on
     some variants of i386 svr4.0.)  */
  for (i = 0; i < pagesize; ++i)
    *(data2 + i) = *(data2 + i) + 1;
  data3 = (char *) malloc (pagesize);
  if (!data3)
    return 1;
  if (read (fd, data3, pagesize) != pagesize)
    return 1;
  for (i = 0; i < pagesize; ++i)
    if (*(data + i) != *(data3 + i))
      return 1;
  close (fd);
  return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mmap_fixed_mapped=yes
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
ac_cv_func_mmap_fixed_mapped=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi


fi
{ echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6; }
if test $ac_cv_func_mmap_fixed_mapped = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP 1
_ACEOF

fi
rm -f conftest.mmap

  { echo "$as_me:$LINENO: checking for mmap of files" >&5
echo $ECHO_N "checking for mmap of files... $ECHO_C" >&6; }
if test "${ac_cv_func_mmap_file+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
   ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu

  if test "$cross_compiling" = yes; then
  ac_cv_func_mmap_file=no
else
  cat >conftest.$ac_ext <<_ACEOF

    /* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

#include <sys/types.h>
#include <sys/mman.h>
#include <fcntl.h>

int
main ()
{

  int fd;
  fd = creat ("foo",0777);
  fd = (int) mmap (0, 1, PROT_READ, MAP_SHARED, fd, 0);
  unlink ("foo");
  return (fd != (int) MAP_FAILED);
  ;
  return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mmap_file=yes
else
  echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

( exit $ac_status )
ac_cv_func_mmap_file=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi


  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


fi
{ echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5
echo "${ECHO_T}$ac_cv_func_mmap_file" >&6; }
if test "$ac_cv_func_mmap_file" = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP_FILE
_ACEOF

   MMAP_FILE=yes

fi

  { echo "$as_me:$LINENO: checking if /dev/zero is needed for mmap" >&5
echo $ECHO_N "checking if /dev/zero is needed for mmap... $ECHO_C" >&6; }
if test "${ac_cv_need_dev_zero_for_mmap+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test "$llvm_cv_os_type" = "Interix" ; then
   ac_cv_need_dev_zero_for_mmap=yes
 else
   ac_cv_need_dev_zero_for_mmap=no
 fi

fi
{ echo "$as_me:$LINENO: result: $ac_cv_need_dev_zero_for_mmap" >&5
echo "${ECHO_T}$ac_cv_need_dev_zero_for_mmap" >&6; }
if test "$ac_cv_need_dev_zero_for_mmap" = yes; then

cat >>confdefs.h <<\_ACEOF
#define NEED_DEV_ZERO_FOR_MMAP 1
_ACEOF

fi

  if test "$ac_cv_func_mmap_fixed_mapped" = "no"
  then
    { echo "$as_me:$LINENO: WARNING: mmap() of a fixed address required but not supported" >&5
echo "$as_me: WARNING: mmap() of a fixed address required but not supported" >&2;}
  fi
  if test "$ac_cv_func_mmap_file" = "no"
  then
    { echo "$as_me:$LINENO: WARNING: mmap() of files required but not found" >&5
echo "$as_me: WARNING: mmap() of files required but not found" >&2;}
  fi
fi

{ echo "$as_me:$LINENO: checking for GCC atomic builtins" >&5
echo $ECHO_N "checking for GCC atomic builtins... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
int main() {
        volatile unsigned long val = 1;
        __sync_synchronize();
        __sync_val_compare_and_swap(&val, 1, 0);
        __sync_add_and_fetch(&val, 1);
        __sync_sub_and_fetch(&val, 1);
        return 0;
      }

_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; } &&
	 { ac_try='test -s conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  { echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6; }

cat >>confdefs.h <<\_ACEOF
#define LLVM_MULTITHREADED 1
_ACEOF

else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	{ echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6; }

cat >>confdefs.h <<\_ACEOF
#define LLVM_MULTITHREADED 0
_ACEOF

  { echo "$as_me:$LINENO: WARNING: LLVM will be built thread-unsafe because atomic builtins are missing" >&5
echo "$as_me: WARNING: LLVM will be built thread-unsafe because atomic builtins are missing" >&2;}
fi

rm -f core conftest.err conftest.$ac_objext \
      conftest$ac_exeext conftest.$ac_ext




for ac_func in __dso_handle
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
{ echo "$as_me:$LINENO: checking for $ac_func" >&5
echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
#define $ac_func innocuous_$ac_func

/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */

#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif

#undef $ac_func

/* Override any GCC internal prototype to avoid an error.
   Use char because int might match the return type of a GCC
   builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char $ac_func ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined __stub_$ac_func || defined __stub___$ac_func
choke me
#endif

int
main ()
{
return $ac_func ();
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_link") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; } &&
	 { ac_try='test -s conftest$ac_exeext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  eval "$as_ac_var=yes"
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	eval "$as_ac_var=no"
fi

rm -f core conftest.err conftest.$ac_objext \
      conftest$ac_exeext conftest.$ac_ext
fi
ac_res=`eval echo '${'$as_ac_var'}'`
	       { echo "$as_me:$LINENO: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_var'}'` = yes; then
  cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF

fi
done


{ echo "$as_me:$LINENO: checking whether llvm-gcc is sane" >&5
echo $ECHO_N "checking whether llvm-gcc is sane... $ECHO_C" >&6; }
if test "${llvm_cv_llvmgcc_sanity+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  llvm_cv_llvmgcc_sanity="no"
if test -x "$LLVMGCC" ; then
  cp /dev/null conftest.c
  "$LLVMGCC" -emit-llvm -S -o - conftest.c | \
      grep 'target datalayout =' > /dev/null 2>&1
  if test $? -eq 0 ; then
    llvm_cv_llvmgcc_sanity="yes"
  fi
  rm conftest.c
fi
fi
{ echo "$as_me:$LINENO: result: $llvm_cv_llvmgcc_sanity" >&5
echo "${ECHO_T}$llvm_cv_llvmgcc_sanity" >&6; }

if test "$llvm_cv_llvmgcc_sanity" = "yes" ; then
  { echo "$as_me:$LINENO: checking llvm-gcc component support" >&5
echo $ECHO_N "checking llvm-gcc component support... $ECHO_C" >&6; }
  llvmcc1path=`"$LLVMGCC" --print-prog-name=cc1`
  LLVMCC1=$llvmcc1path

  llvmcc1pluspath=`"$LLVMGCC" --print-prog-name=cc1plus`
  LLVMCC1PLUS=$llvmcc1pluspath

  llvmgccdir=`echo "$llvmcc1path" | sed 's,/libexec/.*,,'`
  LLVMGCCDIR=$llvmgccdir

  llvmgcclibexec=`echo "$llvmcc1path" | sed 's,/cc1,,'`
  LLVMGCCLIBEXEC=$llvmgcclibexec

  llvmgccversion=`"$LLVMGCC" -dumpversion 2>&1 | sed 's/^\([0-9.]*\).*/\1/'`
  llvmgccmajvers=`echo $llvmgccversion | sed 's/^\([0-9]\).*/\1/'`
  LLVMGCC_VERSION=$llvmgccversion

  LLVMGCC_MAJVERS=$llvmgccmajvers

  llvmgcclangs=`"$LLVMGCC" -v --help 2>&1 | grep '^Configured with:' | sed 's/^.*--enable-languages=\([^ ]*\).*/\1/'`
  LLVMGCC_LANGS=$llvmgcclangs

  { echo "$as_me:$LINENO: result: ok" >&5
echo "${ECHO_T}ok" >&6; }
fi

SHLIBEXT=$libltdl_cv_shlibext


# Translate the various configuration directories and other basic
# information into substitutions that will end up in Makefile.config.in
# that these configured values can be used by the makefiles
if test "${prefix}" = "NONE" ; then
  prefix="/usr/local"
fi
eval LLVM_PREFIX="${prefix}";
eval LLVM_BINDIR="${prefix}/bin";
eval LLVM_LIBDIR="${prefix}/lib";
eval LLVM_DATADIR="${prefix}/share/llvm";
eval LLVM_DOCSDIR="${prefix}/docs/llvm";
eval LLVM_ETCDIR="${prefix}/etc/llvm";
eval LLVM_INCLUDEDIR="${prefix}/include";
eval LLVM_INFODIR="${prefix}/info";
eval LLVM_MANDIR="${prefix}/man";
LLVM_CONFIGTIME=`date`











# Place the various directores into the config.h file as #defines so that we
# can know about the installation paths within LLVM.

cat >>confdefs.h <<_ACEOF
#define LLVM_PREFIX "$LLVM_PREFIX"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_BINDIR "$LLVM_BINDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_LIBDIR "$LLVM_LIBDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DATADIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DOCSDIR "$LLVM_DOCSDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_ETCDIR "$LLVM_ETCDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INCLUDEDIR "$LLVM_INCLUDEDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INFODIR "$LLVM_INFODIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_MANDIR "$LLVM_MANDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_CONFIGTIME "$LLVM_CONFIGTIME"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_HOSTTRIPLE "$host"
_ACEOF


# Determine which bindings to build.
if test "$BINDINGS_TO_BUILD" = auto ; then
  BINDINGS_TO_BUILD=""
  if test "x$OCAMLC" != x -a "x$OCAMLDEP" != x ; then
    BINDINGS_TO_BUILD="ocaml $BINDINGS_TO_BUILD"
  fi
fi
BINDINGS_TO_BUILD=$BINDINGS_TO_BUILD


# This isn't really configurey, but it avoids having to repeat the list in
# other files.
ALL_BINDINGS=ocaml


# Do any work necessary to ensure that bindings have what they need.
binding_prereqs_failed=0
for a_binding in $BINDINGS_TO_BUILD ; do
  case "$a_binding" in
  ocaml)
    if test "x$OCAMLC" = x ; then
      { echo "$as_me:$LINENO: WARNING: --enable-bindings=ocaml specified, but ocamlc not found. Try configure OCAMLC=/path/to/ocamlc" >&5
echo "$as_me: WARNING: --enable-bindings=ocaml specified, but ocamlc not found. Try configure OCAMLC=/path/to/ocamlc" >&2;}
      binding_prereqs_failed=1
    fi
    if test "x$OCAMLDEP" = x ; then
      { echo "$as_me:$LINENO: WARNING: --enable-bindings=ocaml specified, but ocamldep not found. Try configure OCAMLDEP=/path/to/ocamldep" >&5
echo "$as_me: WARNING: --enable-bindings=ocaml specified, but ocamldep not found. Try configure OCAMLDEP=/path/to/ocamldep" >&2;}
      binding_prereqs_failed=1
    fi
    if test "x$OCAMLOPT" = x ; then
      { echo "$as_me:$LINENO: WARNING: --enable-bindings=ocaml specified, but ocamlopt not found. Try configure OCAMLOPT=/path/to/ocamlopt" >&5
echo "$as_me: WARNING: --enable-bindings=ocaml specified, but ocamlopt not found. Try configure OCAMLOPT=/path/to/ocamlopt" >&2;}
          fi
    if test "x$with_ocaml_libdir" != xauto ; then
      OCAML_LIBDIR=$with_ocaml_libdir

    else
      ocaml_stdlib="`"$OCAMLC" -where`"
      if test "$LLVM_PREFIX" '<' "$ocaml_stdlib" -a "$ocaml_stdlib" '<' "$LLVM_PREFIX~"
      then
        # ocaml stdlib is beneath our prefix; use stdlib
        OCAML_LIBDIR=$ocaml_stdlib

      else
        # ocaml stdlib is outside our prefix; use libdir/ocaml
        OCAML_LIBDIR=$LLVM_LIBDIR/ocaml

      fi
    fi
    ;;
  esac
done
if test "$binding_prereqs_failed" = 1 ; then
  { { echo "$as_me:$LINENO: error: Prequisites for bindings not satisfied. Fix them or use configure --disable-bindings." >&5
echo "$as_me: error: Prequisites for bindings not satisfied. Fix them or use configure --disable-bindings." >&2;}
   { (exit 1); exit 1; }; }
fi

{ echo "$as_me:$LINENO: checking for compiler -fvisibility-inlines-hidden option" >&5
echo $ECHO_N "checking for compiler -fvisibility-inlines-hidden option... $ECHO_C" >&6; }
if test "${llvm_cv_cxx_visibility_inlines_hidden+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
   ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu

  oldcxxflags="$CXXFLAGS"
  CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden"
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */

int
main ()
{

  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_compile") 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; } &&
	 { ac_try='test -s conftest.$ac_objext'
  { (case "(($ac_try" in
  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
  *) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
  (eval "$ac_try") 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  llvm_cv_cxx_visibility_inlines_hidden=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

	llvm_cv_cxx_visibility_inlines_hidden=no
fi

rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
  CXXFLAGS="$oldcxxflags"
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


fi
{ echo "$as_me:$LINENO: result: $llvm_cv_cxx_visibility_inlines_hidden" >&5
echo "${ECHO_T}$llvm_cv_cxx_visibility_inlines_hidden" >&6; }
if test "$llvm_cv_cxx_visibility_inlines_hidden" = yes ; then
  ENABLE_VISIBILITY_INLINES_HIDDEN=1

else
  ENABLE_VISIBILITY_INLINES_HIDDEN=0

fi


if test "$llvm_cv_link_use_r" = "yes" ; then
  RPATH="-Wl,-R"
else
  RPATH="-Wl,-rpath"
fi


if test "$llvm_cv_link_use_export_dynamic" = "yes" ; then
  RDYNAMIC="-Wl,-export-dynamic"
else
  RDYNAMIC=""
fi



ac_config_headers="$ac_config_headers include/llvm/Config/config.h"

ac_config_files="$ac_config_files include/llvm/Config/Targets.def"

ac_config_files="$ac_config_files include/llvm/Config/AsmPrinters.def"

ac_config_headers="$ac_config_headers include/llvm/Support/DataTypes.h"

ac_config_headers="$ac_config_headers include/llvm/ADT/iterator.h"


ac_config_files="$ac_config_files Makefile.config"


ac_config_files="$ac_config_files llvm.spec"


ac_config_files="$ac_config_files docs/doxygen.cfg"


ac_config_files="$ac_config_files tools/llvmc/plugins/Base/Base.td"


ac_config_files="$ac_config_files tools/llvm-config/llvm-config.in"


ac_config_commands="$ac_config_commands setup"

ac_config_commands="$ac_config_commands Makefile"


ac_config_commands="$ac_config_commands Makefile.common"


ac_config_commands="$ac_config_commands examples/Makefile"


ac_config_commands="$ac_config_commands lib/Makefile"


ac_config_commands="$ac_config_commands runtime/Makefile"


ac_config_commands="$ac_config_commands test/Makefile"


ac_config_commands="$ac_config_commands test/Makefile.tests"


ac_config_commands="$ac_config_commands unittests/Makefile"


ac_config_commands="$ac_config_commands tools/Makefile"


ac_config_commands="$ac_config_commands utils/Makefile"


ac_config_commands="$ac_config_commands projects/Makefile"


ac_config_commands="$ac_config_commands bindings/Makefile"


ac_config_commands="$ac_config_commands bindings/ocaml/Makefile.ocaml"



cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      *) $as_unset $ac_var ;;
      esac ;;
    esac
  done

  (set) 2>&1 |
    case $as_nl`(ac_space=' '; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;; #(
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
) |
  sed '
     /^ac_cv_env_/b end
     t clear
     :clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     :end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
  if test -w "$cache_file"; then
    test "x$cache_file" != "x/dev/null" &&
      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
echo "$as_me: updating cache $cache_file" >&6;}
    cat confcache >$cache_file
  else
    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
echo "$as_me: not updating unwritable cache $cache_file" >&6;}
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
  ac_i=`echo "$ac_i" | sed "$ac_script"`
  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
  #    will be set to the directory where LIBOBJS objects are built.
  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs


if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi
if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi

: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
  setopt NO_GLOB_SUBST
else
  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh


# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# IFS
# We need space, tab and new line, in precisely that order.  Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" ""	$as_nl"

# Find who we are.  Look in the path if we contain no directory separator.
case $0 in