configure

cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
                     Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_cxx_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether non-existent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_cxx_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  break
fi

    done
    ac_cv_prog_CXXCPP=$CXXCPP

fi
  CXXCPP=$ac_cv_prog_CXXCPP
else
  ac_cv_prog_CXXCPP=$CXXCPP
fi
echo "$as_me:$LINENO: result: $CXXCPP" >&5
echo "${ECHO_T}$CXXCPP" >&6
ac_preproc_ok=false
for ac_cxx_preproc_warn_flag in '' yes
do
  # Use a header file that comes with gcc, so configuring glibc
  # with a fresh cross-compiler works.
  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
  # <limits.h> exists even on freestanding compilers.
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp. "Syntax error" is here to catch this case.
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
                     Syntax error
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_cxx_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  :
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext

  # OK, works on sane cases.  Now check whether non-existent headers
  # can be detected and how.
  cat >conftest.$ac_ext <<_ACEOF
#line $LINENO "configure"
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
#include <ac_nonexistent.h>
_ACEOF
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } >/dev/null; then
  if test -s conftest.err; then
    ac_cpp_err=$ac_cxx_preproc_warn_flag
  else
    ac_cpp_err=
  fi
else
  ac_cpp_err=yes
fi
if test -z "$ac_cpp_err"; then
  # Broken: success on invalid input.
continue
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

  # Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext

done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
  :
else
  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
See \`config.log' for more details." >&5
echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
See \`config.log' for more details." >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu


ac_ext=f
ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_f77_compiler_gnu
if test -n "$ac_tool_prefix"; then
  for ac_prog in g77 f77 xlf frt pgf77 fl32 af77 fort77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 lf95 g95
  do
    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_F77+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$F77"; then
  ac_cv_prog_F77="$F77" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

fi
fi
F77=$ac_cv_prog_F77
if test -n "$F77"; then
  echo "$as_me:$LINENO: result: $F77" >&5
echo "${ECHO_T}$F77" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

    test -n "$F77" && break
  done
fi
if test -z "$F77"; then
  ac_ct_F77=$F77
  for ac_prog in g77 f77 xlf frt pgf77 fl32 af77 fort77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 lf95 g95
do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_F77"; then
  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_F77="$ac_prog"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

fi
fi
ac_ct_F77=$ac_cv_prog_ac_ct_F77
if test -n "$ac_ct_F77"; then
  echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
echo "${ECHO_T}$ac_ct_F77" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  test -n "$ac_ct_F77" && break
done

  F77=$ac_ct_F77
fi


# Provide some information about the compiler.
echo "$as_me:5296:" \
     "checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
  (eval $ac_compiler --version </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
  (eval $ac_compiler -v </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }
{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
  (eval $ac_compiler -V </dev/null >&5) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }

# If we don't use `.F' as extension, the preprocessor is not run on the
# input file.
ac_save_ext=$ac_ext
ac_ext=F
echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
if test "${ac_cv_f77_compiler_gnu+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
      program main
#ifndef __GNUC__
       choke me
#endif

      end
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_compiler_gnu=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_compiler_gnu=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext
ac_cv_f77_compiler_gnu=$ac_compiler_gnu

fi
echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
ac_ext=$ac_save_ext
G77=`test $ac_compiler_gnu = yes && echo yes`
ac_test_FFLAGS=${FFLAGS+set}
ac_save_FFLAGS=$FFLAGS
FFLAGS=
echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
if test "${ac_cv_prog_f77_g+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  FFLAGS=-g
cat >conftest.$ac_ext <<_ACEOF
      program main

      end
_ACEOF
rm -f conftest.$ac_objext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
         { ac_try='test -s conftest.$ac_objext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_prog_f77_g=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_prog_f77_g=no
fi
rm -f conftest.$ac_objext conftest.$ac_ext

fi
echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
if test "$ac_test_FFLAGS" = set; then
  FFLAGS=$ac_save_FFLAGS
elif test $ac_cv_prog_f77_g = yes; then
  if test "$G77" = yes; then
    FFLAGS="-g -O2"
  else
    FFLAGS="-g"
  fi
else
  if test "$G77" = yes; then
    FFLAGS="-O2"
  else
    FFLAGS=
  fi
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu



# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!

# find the maximum length of command line arguments
echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
if test "${lt_cv_sys_max_cmd_len+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
    i=0
  testring="ABCD"

  case $build_os in
  msdosdjgpp*)
    # On DJGPP, this test can blow up pretty badly due to problems in libc
    # (any single argument exceeding 2000 bytes causes a buffer overrun
    # during glob expansion).  Even if it were fixed, the result of this
    # check would be larger than it should be.
    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
    ;;

  gnu*)
    # Under GNU Hurd, this test is not required because there is
    # no limit to the length of command line arguments.
    # Libtool will interpret -1 as no limit whatsoever
    lt_cv_sys_max_cmd_len=-1;
    ;;

  cygwin* | mingw*)
    # On Win9x/ME, this test blows up -- it succeeds, but takes
    # about 5 minutes as the teststring grows exponentially.
    # Worse, since 9x/ME are not pre-emptively multitasking,
    # you end up with a "frozen" computer, even though with patience
    # the test eventually succeeds (with a max line length of 256k).
    # Instead, let's just punt: use the minimum linelength reported by
    # all of the supported platforms: 8192 (on NT/2K/XP).
    lt_cv_sys_max_cmd_len=8192;
    ;;

 *)
    # If test is not a shell built-in, we'll probably end up computing a
    # maximum length that is only half of the actual maximum length, but
    # we can't tell.
    while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
	       = "XX$testring") >/dev/null 2>&1 &&
	    new_result=`expr "X$testring" : ".*" 2>&1` &&
	    lt_cv_sys_max_cmd_len=$new_result &&
	    test $i != 17 # 1/2 MB should be enough
    do
      i=`expr $i + 1`
      testring=$testring$testring
    done
    testring=
    # Add a significant safety factor because C++ compilers can tack on massive
    # amounts of additional arguments before passing them to the linker.
    # It appears as though 1/2 is a usable value.
    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
    ;;
  esac

fi

if test -n $lt_cv_sys_max_cmd_len ; then
  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
else
  echo "$as_me:$LINENO: result: none" >&5
echo "${ECHO_T}none" >&6
fi




# Check for command to grab the raw symbol name followed by C symbol from nm.
echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else

# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"

# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  if test "$host_cpu" = ia64; then
    symcode='[ABCDEGRST]'
  fi
  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
  ;;
irix* | nonstopux*)
  symcode='[BCDEGRST]'
  ;;
osf*)
  symcode='[BCDEGQRST]'
  ;;
solaris* | sysv5*)
  symcode='[BDT]'
  ;;
sysv4)
  symcode='[DFNSTU]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
  symcode='[ABCDGISTW]' ;;
esac

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no

  rm -f conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
  (eval $ac_compile) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && test -s "$nlist"; then
      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
	mv -f "$nlist"T "$nlist"
      else
	rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if grep ' nm_test_var$' "$nlist" >/dev/null; then
	if grep ' nm_test_func$' "$nlist" >/dev/null; then
	  cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
	  # Now generate the symbol file.
	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'

	  cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
	  cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
	  # Now try linking the two files.
	  mv conftest.$ac_objext conftstm.$ac_objext
	  lt_save_LIBS="$LIBS"
	  lt_save_CFLAGS="$CFLAGS"
	  LIBS="conftstm.$ac_objext"
	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } && test -s conftest${ac_exeext}; then
	    pipe_works=yes
	  fi
	  LIBS="$lt_save_LIBS"
	  CFLAGS="$lt_save_CFLAGS"
	else
	  echo "cannot find nm_test_func in $nlist" >&5
	fi
      else
	echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.$ac_ext >&5
  fi
  rm -f conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    lt_cv_sys_global_symbol_pipe=
  fi
done

fi

if test -z "$lt_cv_sys_global_symbol_pipe"; then
  lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
  echo "$as_me:$LINENO: result: failed" >&5
echo "${ECHO_T}failed" >&6
else
  echo "$as_me:$LINENO: result: ok" >&5
echo "${ECHO_T}ok" >&6
fi

echo "$as_me:$LINENO: checking for objdir" >&5
echo $ECHO_N "checking for objdir... $ECHO_C" >&6
if test "${lt_cv_objdir+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  lt_cv_objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null
fi
echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
echo "${ECHO_T}$lt_cv_objdir" >&6
objdir=$lt_cv_objdir





case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'

# Constants:
rm="rm -f"

# Global variables:
default_ofile=mklib
can_build_shared=yes

# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_AR+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$AR"; then
  ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_AR="${ac_tool_prefix}ar"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
  echo "$as_me:$LINENO: result: $AR" >&5
echo "${ECHO_T}$AR" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_AR"; then
  ac_ct_AR=$AR
  # Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_AR"; then
  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_AR="ar"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
echo "${ECHO_T}$ac_ct_AR" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  AR=$ac_ct_AR
else
  AR="$ac_cv_prog_AR"
fi

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_RANLIB+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
  echo "$as_me:$LINENO: result: $RANLIB" >&5
echo "${ECHO_T}$RANLIB" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_RANLIB"; then
  ac_ct_RANLIB=$RANLIB
  # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_RANLIB"; then
  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_RANLIB="ranlib"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
echo "${ECHO_T}$ac_ct_RANLIB" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  RANLIB=$ac_ct_RANLIB
else
  RANLIB="$ac_cv_prog_RANLIB"
fi

if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_STRIP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
  echo "$as_me:$LINENO: result: $STRIP" >&5
echo "${ECHO_T}$STRIP" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

fi
if test -z "$ac_cv_prog_STRIP"; then
  ac_ct_STRIP=$STRIP
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$ac_ct_STRIP"; then
  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_STRIP="strip"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
echo "${ECHO_T}$ac_ct_STRIP" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

  STRIP=$ac_ct_STRIP
else
  STRIP="$ac_cv_prog_STRIP"
fi


old_CC="$CC"
old_CFLAGS="$CFLAGS"

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as