configure

rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
  ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu


fi
echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5
echo "${ECHO_T}$ac_cv_func_mmap_file" >&6
if test "$ac_cv_func_mmap_file" = yes; then

cat >>confdefs.h <<\_ACEOF
#define HAVE_MMAP_FILE
_ACEOF

   MMAP_FILE=yes

fi

echo "$as_me:$LINENO: checking if /dev/zero is needed for mmap" >&5
echo $ECHO_N "checking if /dev/zero is needed for mmap... $ECHO_C" >&6
if test "${ac_cv_need_dev_zero_for_mmap+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test "$llvm_cv_os_type" = "Interix" ; then
   ac_cv_need_dev_zero_for_mmap=yes
 else
   ac_cv_need_dev_zero_for_mmap=no
 fi

fi
echo "$as_me:$LINENO: result: $ac_cv_need_dev_zero_for_mmap" >&5
echo "${ECHO_T}$ac_cv_need_dev_zero_for_mmap" >&6
if test "$ac_cv_need_dev_zero_for_mmap" = yes; then

cat >>confdefs.h <<\_ACEOF
#define NEED_DEV_ZERO_FOR_MMAP 1
_ACEOF

fi
echo "$as_me:$LINENO: checking for mprotect" >&5
echo $ECHO_N "checking for mprotect... $ECHO_C" >&6
if test "${ac_cv_func_mprotect+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h.  */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h.  */
/* Define mprotect to an innocuous variant, in case <limits.h> declares mprotect.
   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
#define mprotect innocuous_mprotect

/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char mprotect (); below.
    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
    <limits.h> exists even on freestanding compilers.  */

#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif

#undef mprotect

/* Override any gcc2 internal prototype to avoid an error.  */
#ifdef __cplusplus
extern "C"
{
#endif
/* We use char because int might match the return type of a gcc2
   builtin and then its argument prototype would still apply.  */
char mprotect ();
/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_mprotect) || defined (__stub___mprotect)
choke me
#else
char (*f) () = mprotect;
#endif
#ifdef __cplusplus
}
#endif

int
main ()
{
return f != mprotect;
  ;
  return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
  (eval $ac_link) 2>conftest.er1
  ac_status=$?
  grep -v '^ *+' conftest.er1 >conftest.err
  rm -f conftest.er1
  cat conftest.err >&5
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); } &&
	 { ac_try='test -z "$ac_c_werror_flag"
			 || test ! -s conftest.err'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; } &&
	 { ac_try='test -s conftest$ac_exeext'
  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
  (eval $ac_try) 2>&5
  ac_status=$?
  echo "$as_me:$LINENO: \$? = $ac_status" >&5
  (exit $ac_status); }; }; then
  ac_cv_func_mprotect=yes
else
  echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5

ac_cv_func_mprotect=no
fi
rm -f conftest.err conftest.$ac_objext \
      conftest$ac_exeext conftest.$ac_ext
fi
echo "$as_me:$LINENO: result: $ac_cv_func_mprotect" >&5
echo "${ECHO_T}$ac_cv_func_mprotect" >&6
if test $ac_cv_func_mprotect = yes; then
  :
else
  { { echo "$as_me:$LINENO: error: Function mprotect() required but not found" >&5
echo "$as_me: error: Function mprotect() required but not found" >&2;}
   { (exit 1); exit 1; }; }
fi


if test "$ac_cv_func_mmap_fixed_mapped" = "no"
then
  { echo "$as_me:$LINENO: WARNING: mmap() of a fixed address required but not supported" >&5
echo "$as_me: WARNING: mmap() of a fixed address required but not supported" >&2;}
fi
if test "$ac_cv_func_mmap_file" = "no"
then
  { echo "$as_me:$LINENO: WARNING: mmap() of files required but not found" >&5
echo "$as_me: WARNING: mmap() of files required but not found" >&2;}
fi


echo "$as_me:$LINENO: checking whether llvm-gcc is sane" >&5
echo $ECHO_N "checking whether llvm-gcc is sane... $ECHO_C" >&6
if test "${llvm_cv_llvmgcc_sanity+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  llvm_cv_llvmgcc_sanity="no"
if test -x "$LLVMGCC" ; then
  cp /dev/null conftest.c
  "$LLVMGCC" -S -o - conftest.c | grep implementation > /dev/null 2>&1
  if test $? -eq 0 ; then
    llvm_cv_llvmgcc_sanity="yes"
  fi
  rm conftest.c
fi
fi
echo "$as_me:$LINENO: result: $llvm_cv_llvmgcc_sanity" >&5
echo "${ECHO_T}$llvm_cv_llvmgcc_sanity" >&6

if test "$llvm_cv_llvmgcc_sanity" = "yes" ; then
  llvmcc1path=`"$LLVMGCC" --print-prog-name=cc1`
  LLVMCC1=$llvmcc1path

  llvmcc1pluspath=`"$LLVMGCC" --print-prog-name=cc1plus`
  LLVMCC1PLUS=$llvmcc1pluspath

  llvmgccdir=`echo "$llvmcc1path" | sed 's,/libexec/.*,,'`
  LLVMGCCDIR=$llvmgccdir

fi

SHLIBEXT=$libltdl_cv_shlibext


# Translate the various configuration directories and other basic
# information into substitutions that will end up in Makefile.config.in
# that these configured values can be used by the makefiles
eval LLVM_PREFIX="${prefix}";
eval LLVM_BINDIR="${prefix}/bin";
eval LLVM_LIBDIR="${prefix}/lib";
eval LLVM_DATADIR="${prefix}/share/llvm";
eval LLVM_DOCSDIR="${prefix}/docs/llvm";
eval LLVM_ETCDIR="${prefix}/etc/llvm";
eval LLVM_INCLUDEDIR="${prefix}/include";
eval LLVM_INFODIR="${prefix}/info";
eval LLVM_MANDIR="${prefix}/man";
LLVM_CONFIGTIME=`date`











# Place the various directores into the config.h file as #defines so that we
# can know about the installation paths within LLVM.

cat >>confdefs.h <<_ACEOF
#define LLVM_PREFIX "$LLVM_PREFIX"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_BINDIR "$LLVM_BINDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_LIBDIR "$LLVM_LIBDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DATADIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_DATADIR "$LLVM_DOCSDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_ETCDIR "$LLVM_ETCDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INCLUDEDIR "$LLVM_INCLUDEDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_INFODIR "$LLVM_INFODIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_MANDIR "$LLVM_MANDIR"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define LLVM_CONFIGTIME "$LLVM_CONFIGTIME"
_ACEOF



          ac_config_headers="$ac_config_headers include/llvm/Config/config.h"


          ac_config_headers="$ac_config_headers include/llvm/Support/DataTypes.h"

          ac_config_headers="$ac_config_headers include/llvm/ADT/hash_map"

          ac_config_headers="$ac_config_headers include/llvm/ADT/hash_set"

          ac_config_headers="$ac_config_headers include/llvm/Support/ThreadSupport.h"

          ac_config_headers="$ac_config_headers include/llvm/ADT/iterator"


          ac_config_files="$ac_config_files Makefile.config"


                                        ac_config_files="$ac_config_files tools/llvmc/st tools/llvmc/cpp tools/llvmc/ll tools/llvmc/c"


          ac_config_files="$ac_config_files docs/doxygen.cfg"


          ac_config_commands="$ac_config_commands setup"

          ac_config_commands="$ac_config_commands Makefile"


          ac_config_commands="$ac_config_commands Makefile.common"


          ac_config_commands="$ac_config_commands examples/Makefile"


          ac_config_commands="$ac_config_commands lib/Makefile"


          ac_config_commands="$ac_config_commands runtime/Makefile"


          ac_config_commands="$ac_config_commands test/Makefile"


          ac_config_commands="$ac_config_commands test/Makefile.tests"


          ac_config_commands="$ac_config_commands tools/Makefile"


          ac_config_commands="$ac_config_commands utils/Makefile"


          ac_config_commands="$ac_config_commands projects/Makefile"



cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
  (set) 2>&1 |
    case `(ac_space=' '; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;;
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n \
	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} |
  sed '
     t clear
     : clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     : end' >>confcache
if diff $cache_file confcache >/dev/null 2>&1; then :; else
  if test -w $cache_file; then
    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
    cat confcache >$cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[	 ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[	 ]*$//;
}'
fi

DEFS=-DHAVE_CONFIG_H

ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_i=`echo "$ac_i" |
	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
  # 2. Add them.
  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs


if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"INSTALL_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi
if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"CONVENIENCE_LTDL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi

: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi
DUALCASE=1; export DUALCASE # for MKS sh

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# Work around bugs in pre-3.0 UWIN ksh.
$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)$' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
  	  /^X\/\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`


# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi


  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
  # Find who we are.  Look in the path if we contain no path at all
  # relative or not.
  case $0 in
    *[\\/]* ) as_myself=$0 ;;
    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done

       ;;
  esac
  # We did not find ourselves, most probably we were run as `sh COMMAND'
  # in which case we are not to be found in the path.
  if test "x$as_myself" = x; then
    as_myself=$0
  fi
  if test ! -f "$as_myself"; then
    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
   { (exit 1); exit 1; }; }
  fi
  case $CONFIG_SHELL in
  '')
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for as_base in sh bash ksh sh5; do
	 case $as_dir in
	 /*)
	   if ("$as_dir/$as_base" -c '
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
	     CONFIG_SHELL=$as_dir/$as_base
	     export CONFIG_SHELL
	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
	   fi;;
	 esac
       done
done
;;
  esac

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line before each line; the second 'sed' does the real
  # work.  The second script uses 'N' to pair each line-number line
  # with the numbered line, and appends trailing '-' during
  # substitution so that $LINENO is not a special case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
  sed '=' <$as_myself |
    sed '
      N
      s,$,-,
      : loop
      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
      t loop
      s,-$,,
      s,^['$as_cr_digits']*\n,,
    ' >$as_me.lineno &&
  chmod +x $as_me.lineno ||
    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensible to this).
  . ./$as_me.lineno
  # Exit status is that of the last command.
  exit
}


case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
  *c*,-n*) ECHO_N= ECHO_C='
' ECHO_T='	' ;;
  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
esac

if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  # We could just check for DJGPP; but this test a) works b) is more generic
  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
  if test -f conf$$.exe; then
    # Don't use ln at all; we don't have any links
    as_ln_s='cp -p'
  else
    as_ln_s='ln -s'
  fi
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.file

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

as_executable_p="test -f"

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


# IFS
# We need space, tab and new line, in precisely that order.
as_nl='
'
IFS=" 	$as_nl"

# CDPATH.
$as_unset CDPATH

exec 6>&1

# Open the log real soon, to keep \$[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.  Logging --version etc. is OK.
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
} >&5
cat >&5 <<_CSEOF

This file was extended by llvm $as_me 1.5cvs, which was
generated by GNU Autoconf 2.59.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

_CSEOF
echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
echo >&5
_ACEOF

# Files that config.status was made for.
if test -n "$ac_config_files"; then
  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_headers"; then
  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_links"; then
  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi

if test -n "$ac_config_commands"; then
  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi

cat >>$CONFIG_STATUS <<\_ACEOF

ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."
_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
llvm config.status 1.5cvs
configured by $0, generated by GNU Autoconf 2.59,
  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2003 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
srcdir=$srcdir
INSTALL="$INSTALL"
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "x$1" : 'x\([^=]*\)='`
    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  -*)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  *) # This is not an option, so the user has probably given explicit
     # arguments.
     ac_option=$1
     ac_need_defaults=false;;
  esac

  case $ac_option in
  # Handling of the options.
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --vers* | -V )
    echo "$ac_cs_version"; exit 0 ;;
  --he | --h)
    # Conflict between --help and --header
    { { echo "$as_me:$LINENO: error: ambiguous option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit 0 ;;
  --debug | --d* | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
Try \`$0 --help' for more information." >&5
echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2;}
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1" ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
#
# INIT-COMMANDS section.
#

llvm_src="${srcdir}"

_ACEOF



cat >>$CONFIG_STATUS <<\_ACEOF
for ac_config_target in $ac_config_targets
do
  case "$ac_config_target" in
  # Handling of arguments.
  "Makefile.config" ) CONFIG_FILES="$CONFIG_FILES Makefile.config" ;;
  "tools/llvmc/st" ) CONFIG_FILES="$CONFIG_FILES tools/llvmc/st" ;;
  "tools/llvmc/cpp" ) CONFIG_FILES="$CONFIG_FILES tools/llvmc/cpp" ;;
  "tools/llvmc/ll" ) CONFIG_FILES="$CONFIG_FILES tools/llvmc/ll" ;;
  "tools/llvmc/c" ) CONFIG_FILES="$CONFIG_FILES tools/llvmc/c" ;;
  "docs/doxygen.cfg" ) CONFIG_FILES="$CONFIG_FILES docs/doxygen.cfg" ;;
  "setup" ) CONFIG_COMMANDS="$CONFIG_COMMANDS setup" ;;
  "Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
  "Makefile.common" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile.common" ;;
  "examples/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS examples/Makefile" ;;
  "lib/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Makefile" ;;
  "runtime/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS runtime/Makefile" ;;
  "test/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile" ;;
  "test/Makefile.tests" ) CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile.tests" ;;
  "tools/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS tools/Makefile" ;;
  "utils/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS utils/Makefile" ;;
  "projects/Makefile" ) CONFIG_COMMANDS="$CONFIG_COMMANDS projects/Makefile" ;;
  "include/llvm/Config/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/config.h" ;;
  "include/llvm/Support/DataTypes.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Support/DataTypes.h" ;;
  "include/llvm/ADT/hash_map" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/hash_map" ;;
  "include/llvm/ADT/hash_set" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/hash_set" ;;
  "include/llvm/Support/ThreadSupport.h" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Support/ThreadSupport.h" ;;
  "include/llvm/ADT/iterator" ) CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/ADT/iterator" ;;
  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done

# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason to put it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Create a temporary directory, and hook for its removal unless debugging.
$debug ||
{
  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}

# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./confstat$$-$RANDOM
  (umask 077 && mkdir $tmp)
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF

#
# CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "\$CONFIG_FILES"; then
  # Protect against being on the right side of a sed subst in config.status.
  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
s,@SHELL@,$SHELL,;t t
s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
s,@exec_prefix@,$exec_prefix,;t t
s,@prefix@,$prefix,;t t
s,@program_transform_name@,$program_transform_name,;t t
s,@bindir@,$bindir,;t t
s,@sbindir@,$sbindir,;t t
s,@libexecdir@,$libexecdir,;t t
s,@datadir@,$datadir,;t t
s,@sysconfdir@,$sysconfdir,;t t
s,@sharedstatedir@,$sharedstatedir,;t t
s,@localstatedir@,$localstatedir,;t t
s,@libdir@,$libdir,;t t
s,@includedir@,$includedir,;t t
s,@oldincludedir@,$oldincludedir,;t t
s,@infodir@,$infodir,;t t
s,@mandir@,$mandir,;t t
s,@build_alias@,$build_alias,;t t
s,@host_alias@,$host_alias,;t t
s,@target_alias@,$target_alias,;t t
s,@DEFS@,$DEFS,;t t
s,@ECHO_C@,$ECHO_C,;t t
s,@ECHO_N@,$ECHO_N,;t t
s,@ECHO_T@,$ECHO_T,;t t
s,@LIBS@,$LIBS,;t t
s,@LLVM_COPYRIGHT@,$LLVM_COPYRIGHT,;t t
s,@subdirs@,$subdirs,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@build_vendor@,$build_vendor,;t t
s,@build_os@,$build_os,;t t
s,@host@,$host,;t t
s,@host_cpu@,$host_cpu,;t t
s,@host_vendor@,$host_vendor,;t t
s,@host_os@,$host_os,;t t
s,@target@,$target,;t t
s,@target_cpu@,$target_cpu,;t t
s,@target_vendor@,$target_vendor,;t t
s,@target_os@,$target_os,;t t
s,@OS@,$OS,;t t
s,@LLVM_ON_UNIX@,$LLVM_ON_UNIX,;t t
s,@LLVM_ON_WIN32@,$LLVM_ON_WIN32,;t t
s,@ARCH@,$ARCH,;t t
s,@ENDIAN@,$ENDIAN,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t