- Move DisableScheduling flag into TargetOption.h
- Move SDNodeOrdering into its own header file. Give it a minimal interface that
  doesn't conflate construction with storage.
- Move assigning the ordering into the SelectionDAGBuilder.

This isn't used yet, so there should be no functional changes.

llvm-svn: 91727

llvm-svn: 91722

llvm-svn: 91718

llvm-svn: 91717

llvm-svn: 91715

debugging some leaks (PR5770 in particular).

llvm-svn: 91713

bootstrap.  This also replaces the WeakVH references that Chris objected to
with normal Value references.

llvm-svn: 91711

llvm-svn: 91709

- an MDNode is designated as function-local when created, and continues to be even if its operands are modified not to refer to function-local IR
- function-localness is designated via lowest bit in SubclassData
- getLocalFunction() descends MDNode tree to see if it is consistently function-local

Add verification of MDNodes to checks that MDNodes are consistently function-local.
Update AsmWriter to use isFunctionLocal().

llvm-svn: 91708

llvm-svn: 91706

associative either.

llvm-svn: 91701

MI was not being used but it was also not being deleted, so it was kept in the garbage list. The memory itself was freed once the function code gen was done.

Once in a while the codegen of another function would create an instruction on the same address. Adding it to the garbage group would work once, but when another pointer was added it would cause an assert as "Cache" was about to be pushed to Ts.

For a patch that make us detect problems like this earlier, take a look at

http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20091214/092758.html

With that patch we assert as soon and the new instruction is added to the garbage set.

llvm-svn: 91691

Patch contributed by Ken Werner of IBM!

llvm-svn: 91681

Patch contributed by Ken Werner of IBM!

llvm-svn: 91680

This works now: (set_option "list_opt", ["val_1", "val_2", "val_3"])

llvm-svn: 91679

multiple uses.  (The construct in question was found in gcc.)

llvm-svn: 91675

be non-optimal. To be precise, we should avoid folding loads if the instructions
only update part of the destination register, and the non-updated part is not
needed. e.g. cvtss2sd, sqrtss. Unfolding the load from these instructions breaks
the partial register dependency and it can improve performance. e.g.

movss (%rdi), %xmm0
cvtss2sd %xmm0, %xmm0

instead of
cvtss2sd (%rdi), %xmm0

An alternative method to break dependency is to clear the register first. e.g.
xorps %xmm0, %xmm0
cvtss2sd (%rdi), %xmm0

llvm-svn: 91672

is not reassociative.

llvm-svn: 91667

llvm-svn: 91666

llvm-svn: 91664

Integer negation only overflows with INT_MIN, but that's an important case.

llvm-svn: 91662

llvm-svn: 91659

llvm-svn: 91657

llvm-svn: 91656

llvm-svn: 91655

contains another loop, or an instruction. The loop form is
substantially more efficient on large loops than the typical
code it replaces.

llvm-svn: 91654

llvm-svn: 91653

llvm-svn: 91651

with unreachable.

llvm-svn: 91650

The change in SelectionDAGBuilder is needed to allow using bitcasts to convert
between f64 (the default type for ARM "d" registers) and 64-bit Neon vector
types.  Radar 7457110.

llvm-svn: 91649

This protects this test from depending on codegen not performing the
tail call optimization by default.

llvm-svn: 91648

llvm-svn: 91647

llvm-svn: 91645

(0 && "error").  Rough consensus seems to be that g++ *should* be diagnosing
this because the pointer makes it not an ICE in c++03.  Everyone agrees that
the current standard is silly and null-pointer-ness should not be based on
ICE-ness.  Excellent fight scene in Act II, denouement weak, two stars.

llvm-svn: 91644

llvm-svn: 91642

of 91296 that caused trouble -- the Processed list needs to be
preserved for the livetime of the pass, as AddUsersIfInteresting
is called from other passes.

llvm-svn: 91641

X86 instruction tables.

Also (while I was at it) cleaned up the X86 tables, removing tabs and
80-line violations.

This patch was reviewed by Chris Lattner, but please let me know if
there are any problems.

* X86*.td
	Removed tabs and fixed 80-line violations

* X86Instr64bit.td
	(IRET, POPCNT, BT_, LSL, SWPGS, PUSH_S, POP_S, L_S, SMSW)
		Added
	(CALL, CMOV) Added qualifiers
	(JMP) Added PC-relative jump instruction
	(POPFQ/PUSHFQ) Added qualifiers; renamed PUSHFQ to indicate
		that it is 64-bit only (ambiguous since it has no
		REX prefix)
	(MOV) Added rr form going the other way, which is encoded
		differently
	(MOV) Changed immediates to offsets, which is more correct;
		also fixed MOV64o64a to have to a 64-bit offset
	(MOV) Fixed qualifiers
	(MOV) Added debug-register and condition-register moves
	(MOVZX) Added more forms
	(ADC, SUB, SBB, AND, OR, XOR) Added reverse forms, which
		(as with MOV) are encoded differently
	(ROL) Made REX.W required
	(BT) Uncommented mr form for disassembly only
	(CVT__2__) Added several missing non-intrinsic forms
	(LXADD, XCHG) Reordered operands to make more sense for
		MRMSrcMem
	(XCHG) Added register-to-register forms
	(XADD, CMPXCHG, XCHG) Added non-locked forms
* X86InstrSSE.td
	(CVTSS2SI, COMISS, CVTTPS2DQ, CVTPS2PD, CVTPD2PS, MOVQ)
		Added
* X86InstrFPStack.td
	(COM_FST0, COMP_FST0, COM_FI, COM_FIP, FFREE, FNCLEX, FNOP,
	 FXAM, FLDL2T, FLDL2E, FLDPI, FLDLG2, FLDLN2, F2XM1, FYL2X,
	 FPTAN, FPATAN, FXTRACT, FPREM1, FDECSTP, FINCSTP, FPREM,
	 FYL2XP1, FSINCOS, FRNDINT, FSCALE, FCOMPP, FXSAVE,
	 FXRSTOR)
		Added
	(FCOM, FCOMP) Added qualifiers
	(FSTENV, FSAVE, FSTSW) Fixed opcode names
	(FNSTSW) Added implicit register operand
* X86InstrInfo.td
	(opaque512mem) Added for FXSAVE/FXRSTOR
	(offset8, offset16, offset32, offset64) Added for MOV
	(NOOPW, IRET, POPCNT, IN, BTC, BTR, BTS, LSL, INVLPG, STR,
	 LTR, PUSHFS, PUSHGS, POPFS, POPGS, LDS, LSS, LES, LFS,
	 LGS, VERR, VERW, SGDT, SIDT, SLDT, LGDT, LIDT, LLDT,
	 LODSD, OUTSB, OUTSW, OUTSD, HLT, RSM, FNINIT, CLC, STC,
	 CLI, STI, CLD, STD, CMC, CLTS, XLAT, WRMSR, RDMSR, RDPMC,
	 SMSW, LMSW, CPUID, INVD, WBINVD, INVEPT, INVVPID, VMCALL,
	 VMCLEAR, VMLAUNCH, VMRESUME, VMPTRLD, VMPTRST, VMREAD,
	 VMWRITE, VMXOFF, VMXON) Added
	(NOOPL, POPF, POPFD, PUSHF, PUSHFD) Added qualifier
	(JO, JNO, JB, JAE, JE, JNE, JBE, JA, JS, JNS, JP, JNP, JL,
	 JGE, JLE, JG, JCXZ) Added 32-bit forms
	(MOV) Changed some immediate forms to offset forms
	(MOV) Added reversed reg-reg forms, which are encoded
		differently
	(MOV) Added debug-register and condition-register moves
	(CMOV) Added qualifiers
	(AND, OR, XOR, ADC, SUB, SBB) Added reverse forms, like MOV
	(BT) Uncommented memory-register forms for disassembler
	(MOVSX, MOVZX) Added forms
	(XCHG, LXADD) Made operand order make sense for MRMSrcMem
	(XCHG) Added register-register forms
	(XADD, CMPXCHG) Added unlocked forms
* X86InstrMMX.td
	(MMX_MOVD, MMV_MOVQ) Added forms
* X86InstrInfo.cpp: Changed PUSHFQ to PUSHFQ64 to reflect table
	change

* X86RegisterInfo.td: Added debug and condition register sets
* x86-64-pic-3.ll: Fixed testcase to reflect call qualifier
* peep-test-3.ll: Fixed testcase to reflect test qualifier
* cmov.ll: Fixed testcase to reflect cmov qualifier
* loop-blocks.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-11.ll: Fixed testcase to reflect call qualifier
* 2009-11-04-SubregCoalescingBug.ll: Fixed testcase to reflect call
  qualifier
* x86-64-pic-2.ll: Fixed testcase to reflect call qualifier
* live-out-reg-info.ll: Fixed testcase to reflect test qualifier
* tail-opts.ll: Fixed testcase to reflect call qualifiers
* x86-64-pic-10.ll: Fixed testcase to reflect call qualifier
* bss-pagealigned.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-1.ll: Fixed testcase to reflect call qualifier
* widen_load-1.ll: Fixed testcase to reflect call qualifier

llvm-svn: 91638

llvm-svn: 91636

llvm-svn: 91635

non-landing pad basic block as the successor to a block that ends in an
unconditional jump will cause block folding to remove the added block as a
successor. Thus eventually removing it AND the landing pad entirely. Critical
edge splitting is an optimization, so we can safely turn it off when dealing
with landing pads.

llvm-svn: 91634