or the C++ files themselves. This enables people to use
just a C compiler to interoperate with LLVM.

llvm-svn: 180063

Disp will always be one of MCSymbolRefExpr or MCConstantExpr, and never NULL.

llvm-svn: 180059

the MCParsedAsmOperand.
Part of rdar://13663589

llvm-svn: 180054

llvm-svn: 180044

llvm-svn: 180040

shifted by the same amount and the shift amount is smaller than the element
size.

llvm-svn: 180039

now taken care of by the frontend, which allows us to parse arbitrary C/C++
variables.
Part of rdar://13663589

llvm-svn: 180037

change indended.
Part of rdar://13663589

llvm-svn: 180028

set below.

llvm-svn: 180015

llvm-svn: 180014

 -- C.4 and C.5 statements, when NSAA is not equal to SP.
 -- C.1.cp statement for VA functions. Note: There are no VFP CPRCs in a
    variadic procedure.

Before this patch "NSAA != 0" means "don't use GPRs anymore ". But there are
some exceptions in AAPCS.
1. For non VA function: allocate all VFP regs for CPRC. When all VFPs are allocated
   CPRCs would be sent to stack, while non CPRCs may be still allocated in GRPs.
2. Check that for VA functions all params uses GPRs and then stack.
   No exceptions, no CPRCs here.

llvm-svn: 180011

Rather than just splitting the input type and hoping for the best, apply
a bit more cleverness. Just splitting the types until the source is
legal often leads to an illegal result time, which is then widened and a
scalarization step is introduced which leads to truly horrible code
generation. With the loop vectorizer, these sorts of operations are much
more common, and so it's worth extra effort to do them well.

Add a legalization hook for the operands of a TRUNCATE node, which will
be encountered after the result type has been legalized, but if the
operand type is still illegal. If simple splitting of both types
ends up with the result type of each half still being legal, just
do that (v16i16 -> v16i8 on ARM, for example). If, however, that would
result in an illegal result type (v8i32 -> v8i8 on ARM, for example),
we can get more clever with power-two vectors. Specifically,
split the input type, but also widen the result element size, then
concatenate the halves and truncate again.  For example on ARM,
To perform a "%res = v8i8 trunc v8i32 %in" we transform to:
  %inlo = v4i32 extract_subvector %in, 0
  %inhi = v4i32 extract_subvector %in, 4
  %lo16 = v4i16 trunc v4i32 %inlo
  %hi16 = v4i16 trunc v4i32 %inhi
  %in16 = v8i16 concat_vectors v4i16 %lo16, v4i16 %hi16
  %res = v8i8 trunc v8i16 %in16

This allows instruction selection to generate three VMOVN instructions
instead of a sequences of moves, stores and loads.

Update the ARMTargetTransformInfo to take this improved legalization
into account.

Consider the simplified IR:

define <16 x i8> @test1(<16 x i32>* %ap) {
  %a = load <16 x i32>* %ap
  %tmp = trunc <16 x i32> %a to <16 x i8>
  ret <16 x i8> %tmp
}

define <8 x i8> @test2(<8 x i32>* %ap) {
  %a = load <8 x i32>* %ap
  %tmp = trunc <8 x i32> %a to <8 x i8>
  ret <8 x i8> %tmp
}

Previously, we would generate the truly hideous:
	.syntax unified
	.section	__TEXT,__text,regular,pure_instructions
	.globl	_test1
	.align	2
_test1:                                 @ @test1
@ BB#0:
	push	{r7}
	mov	r7, sp
	sub	sp, sp, #20
	bic	sp, sp, #7
	add	r1, r0, #48
	add	r2, r0, #32
	vld1.64	{d24, d25}, [r0:128]
	vld1.64	{d16, d17}, [r1:128]
	vld1.64	{d18, d19}, [r2:128]
	add	r1, r0, #16
	vmovn.i32	d22, q8
	vld1.64	{d16, d17}, [r1:128]
	vmovn.i32	d20, q9
	vmovn.i32	d18, q12
	vmov.u16	r0, d22[3]
	strb	r0, [sp, #15]
	vmov.u16	r0, d22[2]
	strb	r0, [sp, #14]
	vmov.u16	r0, d22[1]
	strb	r0, [sp, #13]
	vmov.u16	r0, d22[0]
	vmovn.i32	d16, q8
	strb	r0, [sp, #12]
	vmov.u16	r0, d20[3]
	strb	r0, [sp, #11]
	vmov.u16	r0, d20[2]
	strb	r0, [sp, #10]
	vmov.u16	r0, d20[1]
	strb	r0, [sp, #9]
	vmov.u16	r0, d20[0]
	strb	r0, [sp, #8]
	vmov.u16	r0, d18[3]
	strb	r0, [sp, #3]
	vmov.u16	r0, d18[2]
	strb	r0, [sp, #2]
	vmov.u16	r0, d18[1]
	strb	r0, [sp, #1]
	vmov.u16	r0, d18[0]
	strb	r0, [sp]
	vmov.u16	r0, d16[3]
	strb	r0, [sp, #7]
	vmov.u16	r0, d16[2]
	strb	r0, [sp, #6]
	vmov.u16	r0, d16[1]
	strb	r0, [sp, #5]
	vmov.u16	r0, d16[0]
	strb	r0, [sp, #4]
	vldmia	sp, {d16, d17}
	vmov	r0, r1, d16
	vmov	r2, r3, d17
	mov	sp, r7
	pop	{r7}
	bx	lr

	.globl	_test2
	.align	2
_test2:                                 @ @test2
@ BB#0:
	push	{r7}
	mov	r7, sp
	sub	sp, sp, #12
	bic	sp, sp, #7
	vld1.64	{d16, d17}, [r0:128]
	add	r0, r0, #16
	vld1.64	{d20, d21}, [r0:128]
	vmovn.i32	d18, q8
	vmov.u16	r0, d18[3]
	vmovn.i32	d16, q10
	strb	r0, [sp, #3]
	vmov.u16	r0, d18[2]
	strb	r0, [sp, #2]
	vmov.u16	r0, d18[1]
	strb	r0, [sp, #1]
	vmov.u16	r0, d18[0]
	strb	r0, [sp]
	vmov.u16	r0, d16[3]
	strb	r0, [sp, #7]
	vmov.u16	r0, d16[2]
	strb	r0, [sp, #6]
	vmov.u16	r0, d16[1]
	strb	r0, [sp, #5]
	vmov.u16	r0, d16[0]
	strb	r0, [sp, #4]
	ldm	sp, {r0, r1}
	mov	sp, r7
	pop	{r7}
	bx	lr

Now, however, we generate the much more straightforward:
	.syntax unified
	.section	__TEXT,__text,regular,pure_instructions
	.globl	_test1
	.align	2
_test1:                                 @ @test1
@ BB#0:
	add	r1, r0, #48
	add	r2, r0, #32
	vld1.64	{d20, d21}, [r0:128]
	vld1.64	{d16, d17}, [r1:128]
	add	r1, r0, #16
	vld1.64	{d18, d19}, [r2:128]
	vld1.64	{d22, d23}, [r1:128]
	vmovn.i32	d17, q8
	vmovn.i32	d16, q9
	vmovn.i32	d18, q10
	vmovn.i32	d19, q11
	vmovn.i16	d17, q8
	vmovn.i16	d16, q9
	vmov	r0, r1, d16
	vmov	r2, r3, d17
	bx	lr

	.globl	_test2
	.align	2
_test2:                                 @ @test2
@ BB#0:
	vld1.64	{d16, d17}, [r0:128]
	add	r0, r0, #16
	vld1.64	{d18, d19}, [r0:128]
	vmovn.i32	d16, q8
	vmovn.i32	d17, q9
	vmovn.i16	d16, q8
	vmov	r0, r1, d16
	bx	lr

llvm-svn: 179989

Arguments after the fixed arguments never use the floating point
registers.

llvm-svn: 179987

Don't ignore the high 32 bits of the immediate.

llvm-svn: 179985

This allows common sp-offsets to be part of the instruction and is
probably faster on modern CPUs too.

llvm-svn: 179977

With a little help from the frontend, it looks like the standard va_*
intrinsics can do the job.

Also clean up an old bitcast hack in LowerVAARG that dealt with
unaligned double loads. Load SDNodes can specify an alignment now.

Still missing: Calling varargs functions with float arguments.

llvm-svn: 179961

Previously, when spilling 64-bit paired registers, an LDMIA with both
a FrameIndex and an offset was produced. This kind of instruction
shouldn't exist, and the extra operand was being confused with the
predicate, causing aborts later on.

This removes the invalid 0-offset from the instruction being
produced.

llvm-svn: 179956

llvm-svn: 179952

I think it's almost impossible to fold atomic fences profitably under
LLVM/C++11 semantics. As a result, this is now unused and just
cluttering up the target interface.

llvm-svn: 179940

llvm-svn: 179939

The getSwappedPredicate function can be used in other places (such as in
improvements to the PPCCTRLoops pass). Instead of trapping it as a static
function in PPCInstrInfo, move it into PPCPredicates with other
predicate-related things.

No functionality change intended.

llvm-svn: 179926

Add CodeGen support for functions that always return arguments via a new parameter attribute 'returned', which is taken advantage of in target-independent tail call opportunity detection and in ARM call lowering (when placed on an integral first parameter).

llvm-svn: 179925

llvm-svn: 179913

llvm-svn: 179906

trying to move as much FastISel logic as possible out of the main path in
SelectionDAGISel - intermixing them just adds confusion.

llvm-svn: 179902

llvm-svn: 179901

When matching a compare with a subtract where the arguments of the compare are
swapped w.r.t. the arguments of the subtract, we need to negate the predicates
(or CR bit indices) of the users. This, however, is not the same as inverting
the predicate (negating LT -> GT, but inverting LT -> GE, for example). The ARM
backend seems to do this correctly, but when I adapted the code for the PPC
backend, I introduced an error in this logic.

Comparison optimization is now enabled again by default.

llvm-svn: 179899

Based on the patch by David Nadlinger!

llvm-svn: 179889

llvm-svn: 179875

This patch adds support for recoded (meaning assembly-language compatible to
standard mips32) arithmetic 32-bit instructions.

Patch by Zoran Jovanovic.

llvm-svn: 179873

operand type to uimm16.

Patch by Vladimir Medic.

llvm-svn: 179872

indended.
Part of rdar://13663589

llvm-svn: 179871

qualifiers don't necessarily begin with an identifier (e.g., ::foo::bar).

llvm-svn: 179867

llvm-svn: 179866

llvm-svn: 179865

llvm-svn: 179856

Patch from Mihail Popa

llvm-svn: 179854

llvm-svn: 179847

llvm-svn: 179833

llvm-svn: 179830