give the reason for the interrupt. Also make sure it we don't want to unwind from the evaluation
we print something if it is interrupted.

llvm-svn: 131448

Fix places that were writing directly to the debugger's output
handles to go through the appropriate channels instead.

llvm-svn: 131415

If we are asked to restore all register values, we need to fall back to 
restoring each register one by one.

llvm-svn: 131398

packets in GDB remote.

Also fixed a compiler warning for an unhandled case for a switch.

llvm-svn: 131397

Correctly handle invalid 32-bit mmap fail return value in ProcessGDBRemote.

llvm-svn: 131394

Prior to this fix we would often call SendPacketAndWaitForResponse() which
returns the number of bytes in the response. The UNSUPPORTED response in the
GDB remote protocol is zero bytes and we were checking for it inside an if
statement:

if (SendPacketAndWaitForResponse(...))
{
    if (response.IsUnsupportedResponse())
    {
        // UNSUPPORTED...
        // This will never happen...
    }
}

We now handle is properly as:

if (SendPacketAndWaitForResponse(...))
{
}
else
{
    // UNSUPPORTED...
}

llvm-svn: 131393

ABIMacOSX_arm plugin.

Modified darwin-debug to print out the exectuable, working directory and
arguments a bit differently.

llvm-svn: 131392

changes.

llvm-svn: 131391

definitions and names.

llvm-svn: 131387

the appropriate registers for arm and x86_64. The register names for the
arguments that are the size of a pointer or less are all named "arg1", "arg2",
etc. This allows you to read these registers by name:

(lldb) register read arg1 arg2 arg3
...

You can also now specify you want to see alternate register names when executing
the read register command:

(lldb) register read --alternate
(lldb) register read -A

llvm-svn: 131376

thread plan. In order to get the return value, you can call:

        void
        ThreadPlanCallFunction::RequestReturnValue (lldb::ValueSP &return_value_sp);
        
This registers a shared pointer to a return value that will get filled in if
everything goes well. After the thread plan is run the return value will be
extracted for you.

Added an ifdef to be able to switch between the LLVM MCJIT and the standand JIT.
We currently have the standard JIT selected because we have some work to do to
get the MCJIT fuctioning properly.

Added the ability to call functions with 6 argument in the x86_64 ABI.

Added the ability for GDBRemoteCommunicationClient to detect if the allocate
and deallocate memory packets are supported and to not call allocate memory 
("_M") or deallocate ("_m") if we find they aren't supported.

Modified the ProcessGDBRemote::DoAllocateMemory(...) and ProcessGDBRemote::DoDeallocateMemory(...) 
to be able to deal with the allocate and deallocate memory packets not being 
supported. If they are not supported, ProcessGDBRemote will switch to calling
"mmap" and "munmap" to allocate and deallocate memory instead using our 
trivial function call support.

Modified the "void ProcessGDBRemote::DidLaunchOrAttach()" to correctly ignore 
the qHostInfo triple information if any was specified in the target. Currently 
if the target only specifies an architecture when creating the target:

(lldb) target create --arch i386 a.out

Then the vendor, os and environemnt will be adopted by the target.

If the target was created with any triple that specifies more than the arch:

(lldb) target create --arch i386-unknown-unknown a.out

Then the target will maintain its triple and not adopt any new values. This
can be used to help force bare board debugging where the dynamic loader for
static files will get used and users can then use "target modules load ..."
to set addressses for any files that are desired.

Added back some convenience functions to the lldb_private::RegisterContext class
for writing registers with unsigned values. Also made all RegisterContext
constructors explicit to make sure we know when an integer is being converted
to a RegisterValue. 

llvm-svn: 131370

llvm-svn: 131334

Breakpoint::Description with eDescriptionLevelBrief should just print the number of locations, printing the list of locations is pointless.

llvm-svn: 131333

For the purposes of setting breakpoints treat methods defined in the class and methods defined in a category on the class as the same.

llvm-svn: 131331

solve the build break due to the lack of this method.

It also propose a solution to the API changes in RegisterContext.

I upgraded also the the python version in the makefile. My linux
installation has python2.7 and AFAIK also the latest ubuntu
has this version of python so maybe is worth upgrading.

Patch by Marco Minutoli <mminutoli@gmail.com>

[Note: I had to hand merge in the diffs since patch thinks it is a corrupt patch.]

llvm-svn: 131313

reflects this change.

Marco Minutoli <mminutoli@gmail.com>

llvm-svn: 131306

Patch by Marco Minutoli <mminutoli@gmail.com>

llvm-svn: 131304

breakage due to its presence.

Patch by Marco Minutoli <mminutoli@gmail.com>

llvm-svn: 131303

as non-const in the debug information, added a fallback
to GetFunctionAddress, adding the const qualifier after
the fact and searching again.

llvm-svn: 131299

representing variables whose type must be inferred
from the way they are used.  Functions without debug
information now return UnknownAnyTy and must be cast.

Variables with no debug information are not yet using
UnknownAnyTy; instead they are assumed to be void*.
Support for variables of unknown type is coming (and,
in fact, some relevant support functions are included
in this commit) but will take a bit of extra effort.

The testsuite has also been updated to reflect the new
requirement that the result of printf be cast, i.e.

expr (int) printf("Hello world!")

llvm-svn: 131263

of the current instruction plus 8.  And for Triple::thumb, it is plus 4.

rdar://problem/9170971
lldb disassembly's symbol information not correct (off by 2?)

llvm-svn: 131256

Construction of the RegisterReaderArg instance should happen after we have a valid base_addr, not before.

llvm-svn: 131236

pointers:

        virtual bool
        PrepareTrivialCall (Thread &thread, 
                            lldb::addr_t sp,
                            lldb::addr_t functionAddress,
                            lldb::addr_t returnAddress, 
                            lldb::addr_t *arg1_ptr,
                            lldb::addr_t *arg2_ptr,
                            lldb::addr_t *arg3_ptr) const = 0;

Prior to this it was:

        virtual bool
        PrepareTrivialCall (Thread &thread, 
                            lldb::addr_t sp,
                            lldb::addr_t functionAddress,
                            lldb::addr_t returnAddress, 
                            lldb::addr_t arg,
                            lldb::addr_t *this_arg,
                            lldb::addr_t *cmd_arg) const = 0;

This was because the function that called this slowly added more features to
be able to call a C++ member function that might have a "this" pointer, and 
then later added "self + cmd" support for objective C. Cleaning this code up
and the code that calls it makes it easier to implement the functions for
new targets.

The MacOSX_arm::PrepareTrivialCall() is now filled in and ready for testing.

llvm-svn: 131221

llvm-svn: 131219

llvm-svn: 131217

respective ABI plugins as they were plug-ins that supplied ABI specfic info.

Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.

Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.

llvm-svn: 131193

Add ability to recognize/handle quotes around commands
(e.g. '"target" create'  works as well as 'target create').

llvm-svn: 131185

looked up.  Queries for global types were made
too specific -- including the current module
and compile unit in the query was limiting the
search when we wanted a truly global search.

llvm-svn: 131145

Make sure writing asynchronous output only backs up
& overwrites prompt if the IOChannel input reader is the top
input reader.

llvm-svn: 131110

treated as being permanently resident in target
memory.  In fact, since the expression's stack frame
is deleted and potentially re-used after the
expression completes, the variables need to be treated
as being freeze-dried.

llvm-svn: 131104

into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:

virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);

virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);

There is now a new class specifically designed to hold register values: 
        lldb_private::RegisterValue
        
The new register context calls that subclasses must implement are:

virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0;

virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0;

The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the 
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..). 

All RegiterContext and other sources have been switched over to using the new
regiter value class.

llvm-svn: 131096

Fix the wrong error message for "platform process info", i.e., with no pid(s) specified for the command.

llvm-svn: 131089

being returned for both the PC and FP.

llvm-svn: 131081

a new "QLaunchArch:<arch-name>" where <arch-name> is the architecture name.
This allows us to remotely launch a debugserver and then set the architecture
for the binary we will launch.

llvm-svn: 131064

they are treated as pointers of type (void*).  This
allows reading of environ, for instance.

llvm-svn: 131063

function and if not return an error.

llvm-svn: 131061

variables be evaluated statically.

Also fixed a bug that caused the results of
statically-evaluated expressions to be materialized
improperly.

This bug also removes some duplicate code.

llvm-svn: 131042

llvm-svn: 131041

llvm-svn: 131039

Replace calls to HandleCommand in lldb core with more appropriate
direct function calls.  As part of this, collect code that processes
arguments & options for aliases into a single function.

llvm-svn: 131020