SDNodes and MachineOperands get target flags representing the %hi() and
%lo() assembly annotations that eventually become relocations.

Also define flags to be used by the 64-bit code models.

llvm-svn: 179468

Currently, only abs32 and pic32 are implemented. Add a test case for
abs32 with 64-bit code. 64-bit PIC code is currently broken.

llvm-svn: 179463

It doesn't seem like anybody is checking types this late in isel, so no
test case.

llvm-svn: 179462

llvm-svn: 179086

The save area is twice as big and there is no struct return slot. The
stack pointer is always 16-byte aligned (after adding the bias).

Also eliminate the stack adjustment instructions around calls when the
function has a reserved stack frame.

llvm-svn: 179083

There is still no support for byval arguments (which I don't think are
needed) and varargs.

llvm-svn: 178993

Integer return values are sign or zero extended by the callee, and
structs up to 32 bytes in size can be returned in registers.

The CC_Sparc64 CallingConv definition is shared between
LowerFormalArguments_64 and LowerReturn_64. Function arguments and
return values are passed in the same registers.

The inreg flag is also used for return values. This is required to handle
C functions returning structs containing floats and ints:

  struct ifp {
    int i;
    float f;
  };

  struct ifp f(void);

LLVM IR:

  define inreg { i32, float } @f() {
     ...
     ret { i32, float } %retval
  }

The ABI requires that %retval.i is returned in the high bits of %i0
while %retval.f goes in %f1.

Without the inreg return value attribute, %retval.i would go in %i0 and
%retval.f would go in %f3 which is a more efficient way of returning
%multiple values, but it is not ABI compliant for returning C structs.

llvm-svn: 178966

64-bit SPARC v9 processes use biased stack and frame pointers, so the
current function's stack frame is located at %sp+BIAS .. %fp+BIAS where
BIAS = 2047.

This makes more local variables directly accessible via [%fp+simm13]
addressing.

llvm-svn: 178965

All arguments are formally assigned to stack positions and then promoted
to floating point and integer registers. Since there are more floating
point registers than integer registers, this can cause situations where
floating point arguments are assigned to registers after integer
arguments that where assigned to the stack.

Use the inreg flag to indicate 32-bit fragments of structs containing
both float and int members.

The three-way shadowing between stack, integer, and floating point
registers requires custom argument lowering. The good news is that
return values are passed in the exact same way, and we can share the
code.

Still missing:

 - Update LowerReturn to handle structs returned in registers.
 - LowerCall.
 - Variadic functions.

llvm-svn: 178958

This requires v9 cmov instructions using the %xcc flags instead of the
%icc flags.

Still missing:
- Select floats on %xcc flags.
- Select i64 on %fcc flags.

llvm-svn: 178737

The same compare instruction is used for 32-bit and 64-bit compares. It
sets two different sets of flags: icc and xcc.

This patch adds a conditional branch instruction using the xcc flags for
64-bit compares.

llvm-svn: 178621

There is only a few new instructions, the rest is handled with patterns.

llvm-svn: 178528

SPARC v9 extends all ALU instructions to 64 bits, so we simply need to
add patterns to use them for both i32 and i64 values.

llvm-svn: 178527

The last resort pattern produces 6 instructions, and there are still
opportunities for materializing some immediates in fewer instructions.

llvm-svn: 178526

SPARC v9 defines new 64-bit shift instructions. The 32-bit shift right
instructions are still usable as zero and sign extensions.

This adds new F3_Sr and F3_Si instruction formats that probably should
be used for the 32-bit shifts as well. They don't really encode an
simm13 field.

llvm-svn: 178525

The 'sparc' architecture produces 32-bit code while 'sparcv9' produces
64-bit code.

It is also possible to run 32-bit code using SPARC v9 instructions with:

  llc -march=sparc -mattr=+v9

llvm-svn: 178524

This is far from complete, but it is enough to make it possible to write
test cases using i64 arguments.

Missing features:
- Floating point arguments.
- Receiving arguments on the stack.
- Calls.

llvm-svn: 178523

We are going to use the same registers for 32-bit and 64-bit values, but
in two different register classes. The I64Regs register class has a
larger spill size and alignment.

The addition of an i64 register class confuses TableGen's type
inference, so it is necessary to clarify the type of some immediates and
the G0 register.

In 64-bit mode, pointers are i64 and should use the I64Regs register
class. Implement getPointerRegClass() to dynamically provide the pointer
register class depending on the subtarget. Use ptr_rc and iPTR for
memory operands.

Finally, add the i64 type to the IntRegs register class. This register
class is not used to hold i64 values, I64Regs is for that. The type is
required to appease TableGen's type checking in output patterns like this:

  def : Pat<(add i64:$a, i64:$b), (ADDrr $a, $b)>;

SPARC v9 uses the same ADDrr instruction for i32 and i64 additions, and
TableGen doesn't know to check the type of register sub-classes.

llvm-svn: 178522

The types of register variables no longer need to be specified in output
patterns.

llvm-svn: 177845

Also update the documentation since Sparc is the nicest backend, and
used as an example in WritingAnLLVMBackend.

llvm-svn: 177835

The SelectionDAG graph has MVT type labels, not register classes, so
this makes it clearer what is happening.

This notation is also robust against adding more types to the IntRegs
register class.

llvm-svn: 177829

Add the current PEI register scavenger as a parameter to the
processFunctionBeforeFrameFinalized callback.

This change is necessary in order to allow the PowerPC target code to
set the register scavenger frame index after the save-area offset
adjustments performed by processFunctionBeforeFrameFinalized. Only
after these adjustments have been made is it possible to estimate
the size of the stack frame.

llvm-svn: 177108

llvm-svn: 176648

to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.

There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.

The refactoring was OK'd by Anton Korobeynikov on llvmdev.

Note: this touches the target interfaces, so out-of-tree targets may
be affected.

llvm-svn: 175788

llvm-svn: 174413

Each target implementation was needlessly recomputing the index.
Part of rdar://13076458

llvm-svn: 174083

conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
   the target provides a sincos library call.

Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.

rdar://13087969
PR13204

llvm-svn: 173755

Clean up assignment of CalleeSaveStackSlotSize: get rid of the default and explicitly set this in every target that needs to change it from the default.

llvm-svn: 173270

a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.

The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.

The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.

The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.

The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.

The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.

The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.

The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.

Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.

Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.

Commits to update DragonEgg and Clang will be made presently.

llvm-svn: 171681

into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.

There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.

The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.

I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).

I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.

llvm-svn: 171366

missed in the first pass because the script didn't yet handle include
guards.

Note that the script is now able to handle all of these headers without
manual edits. =]

llvm-svn: 169224

Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.

Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]

llvm-svn: 169131

Implement a basic VectorTargetTransformInfo interface to be used by the loop and bb vectorizers for modeling the cost of instructions.

llvm-svn: 166593

llvm-svn: 166248

The TargetTransform changes are breaking LTO bootstraps of clang.  I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.

This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741

llvm-svn: 166168

Add a new interface to allow IR-level passes to access codegen-specific information.

llvm-svn: 165665

llvm-svn: 165402

llvm-svn: 162515

llvm-svn: 161328

llvm-svn: 160477