This fixes some problems with too conservative checking where we were
marking all aliases of a register as used, and then also checking all
aliases when allocating a register.

<rdar://problem/13249625>

llvm-svn: 175782

llvm-svn: 175775

llvm-svn: 175771

Large code model is identical to medium code model except that the
addis/addi sequence for "local" accesses is never used.  All accesses
use the addis/ld sequence.

The coding changes are straightforward; most of the patch is taken up
with creating variants of the medium model tests for large model.

llvm-svn: 175767

llvm-svn: 175765

exists solely to enable it to call itself for i8 with some registers.
The proposed patch simplifies the function somewhat to make the High
bit only meaningful for the i8 mode, which makes sense. No functional
difference (getX86SubSuperRegister is not getting called from anywhere
outside with i64 and High=true).

llvm-svn: 175762

A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.

llvm-svn: 175759

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175758

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175757

It actually fixes quite a bunch of piglit tests.

This is a candidate for the mesa-stable branch.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175756

Instead of using custom inserters, it's simpler and
should make DAG folding easier.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175755

v2: put implicit parameters in []

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175754

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175753

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175752

Order the classes and add asm operands.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175751

Fixing asm operation names.

v2: fix name of the e64 encoding, also add asm operands

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175750

Fixing asm operation names.

v2: use ZERO constant, also add asm operands

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175749

Fixing asm operation names.

v2: use ZERO constant, also add asm operands

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175748

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175747

Those two files got mixed up.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 175746

Fixes for-loop.cl piglit test

Patch By: Vincent Lejeune

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

NOTE: This is a candidate for the Mesa stable branch.
llvm-svn: 175742

llvm-svn: 175739

NOTE: This is a candidate for the Mesa stable branch.

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 175733

llvm-svn: 175732

llvm-svn: 175731

This brings the number of remaining failures in 'make check' without
LiveVariables down to 39, with 1 unexpectedly passing test.

llvm-svn: 175727

llvm-svn: 175726

available.

With this commit there are no longer any assertion or verifier failures when
running 'make check' without LiveVariables. There are still 56 failing tests
with codegen differences and 1 unexpectedly passing test.

llvm-svn: 175719

there were inline br .+4 instructions. Soon everything can enjoy the
full instruction scheduling experience.

llvm-svn: 175718

The constructs %hi() and %lo() represent the high and low 16 
bits of the address. 
Because the 16 bit offset field of an LW instruction is 
interpreted as signed, if bit 15 of the low part is 1 then the 
low part will act as a negative and 1 needs to be added to the 
high part.

Contributer: Vladimir Medic
llvm-svn: 175707

This patch implements the PPCDAGToDAGISel::PostprocessISelDAG virtual
method to perform post-selection peephole optimizations on the DAG
representation.

One optimization is implemented here:  folds to clean up complex
addressing expressions for thread-local storage and medium code
model.  It will also be useful for large code model sequences when
those are added later.  I originally thought about doing this on the
MI representation prior to register assignment, but it's difficult to
do effective global dead code elimination at that point.  DCE is
trivial on the DAG representation.

A typical example of a candidate code sequence in assembly:

   addis 3, 2, globalvar@toc@ha
   addi  3, 3, globalvar@toc@l
   lwz   5, 0(3)

When the final instruction is a load or store with an immediate offset
of zero, the offset from the add-immediate can replace the zero,
provided the relocation information is carried along:

   addis 3, 2, globalvar@toc@ha
   lwz   5, globalvar@toc@l(3)

Since the addi can in general have multiple uses, we need to only
delete the instruction when the last use is removed.

llvm-svn: 175697

This implementation of NoneType/None does have some holes but I haven't
found one that doesn't - open to improvement.

llvm-svn: 175696

llvm-svn: 175693

llvm-svn: 175692

Rewrite value numbers directly in the 'Other' LiveInterval which is
moribund anyway. This avoids allocating the OtherAssignments vector.

llvm-svn: 175690

just be turned into kills on the spot.

llvm-svn: 175688

missed before but probably what was intended.

llvm-svn: 175687

excluding visibility bits.

Mips specific standalone assembler directive "set at".

This directive changes the general purpose register
that the assembler will use when given the symbolic
register name $at.

This does not include negative testing. That will come
in a future patch.

A side affect of this patch recognizes the different 
GPR register names for temporaries between old abi
and new abi so a test case for that is included.

Contributer: Vladimir Medic
llvm-svn: 175686

When findReachingDefs() finds that only one value can reach the basic
block, just copy the work list of visited blocks directly into the live
interval.

Sort the block list and use a LiveRangeUpdater to make the bulk add
fast.

When multiple reaching defs are found, transfer the work list to the
updateSSA() work list as before. Also use LiveRangeUpdater in
updateLiveIns() following updateSSA().

This makes live interval analysis more than 3x faster on one huge test
case.

llvm-svn: 175685

The slot that we're adding/removing the attribute from may not be the same as
the attribute coming in. Make sure that they match up before we try to
add/remove them.
PR15313

llvm-svn: 175684