respective ABI plugins as they were plug-ins that supplied ABI specfic info.

Also hookep up the UnwindAssemblyInstEmulation so that it can generate the
unwind plans for ARM.

Changed the way ABI plug-ins are handed out when you get an instance from
the plug-in manager. They used to return pointers that would be mananged
individually by each client that requested them, but now they are handed out
as shared pointers since there is no state in the ABI objects, they can be
shared.

llvm-svn: 131193

Make sure writing asynchronous output only backs up
& overwrites prompt if the IOChannel input reader is the top
input reader.

llvm-svn: 131110

into some cleanup I have been wanting to do when reading/writing registers.
Previously all RegisterContext subclasses would need to implement:

virtual bool
ReadRegisterBytes (uint32_t reg, DataExtractor &data);

virtual bool
WriteRegisterBytes (uint32_t reg, DataExtractor &data, uint32_t data_offset = 0);

There is now a new class specifically designed to hold register values: 
        lldb_private::RegisterValue
        
The new register context calls that subclasses must implement are:

virtual bool
ReadRegister (const RegisterInfo *reg_info, RegisterValue &reg_value) = 0;

virtual bool
WriteRegister (const RegisterInfo *reg_info, const RegisterValue &reg_value) = 0;

The RegisterValue class must be big enough to handle any register value. The
class contains an enumeration for the value type, and then a union for the 
data value. Any integer/float values are stored directly in an appropriate
host integer/float. Anything bigger is stored in a byte buffer that has a length
and byte order. The RegisterValue class also knows how to copy register value
bytes into in a buffer with a specified byte order which can be used to write
the register value down into memory, and this does the right thing when not
all bytes from the register values are needed (getting a uint8 from a uint32
register value..). 

All RegiterContext and other sources have been switched over to using the new
regiter value class.

llvm-svn: 131096

llvm-svn: 131039

ValueObject is, as long as the ValueObject that is being asked to be casted
is a pointer itself.

llvm-svn: 130966

Change the boolean "use_dynamic" over to a tri-state, no-dynamic, dynamic-w/o running target,
and dynamic with running target.

llvm-svn: 130832

Remove type cast that was causing compiler warning.

llvm-svn: 130790

This patch captures and serializes all output being written by the
command line driver, including the lldb prompt being output by
editline, the asynchronous process output & error messages, and
asynchronous messages written by target stop-hooks.

As part of this it introduces a new Stream class,
StreamAsynchronousIO.  A StreamAsynchronousIO object is created with a
broadcaster, who will eventually broadcast the stream's data for a
listener to handle, and an event type indicating what type of event
the broadcaster will broadcast.  When the Write method is called on a
StreamAsynchronousIO object, the data is appended to an internal
string.  When the Flush method is called on a StreamAsynchronousIO
object, it broadcasts it's data string and clears the string.

Anything in lldb-core that needs to generate asynchronous output for
the end-user should use the StreamAsynchronousIO objects.

I have also added a new notification type for InputReaders, to let
them know that a asynchronous output has been written. This is to
allow the input readers to, for example, refresh their prompts and
lines, if desired.  I added the case statements to all the input
readers to catch this notification, but I haven't added any code for
handling them yet (except to the IOChannel input reader).

llvm-svn: 130721

llvm-svn: 130701

interface.

Added a quick way to set the platform though the SBDebugger interface. I will
actually an a SBPlatform support soon, but for now this will do.

ConnectionFileDescriptor can be passed a url formatted as: "fd://<fd>" where
<fd> is a file descriptor in the current process. This is handy if you have
services, deamons, or other tools that can spawn processes and give you a
file handle.

llvm-svn: 130565

emulate instruction classes.

llvm-svn: 130556

depth control, pointer depth, and more) when dumping memory and viewing as
a type.

llvm-svn: 130436

new OptionGroup subclasses for:
- output file for use with options: 
        long opts: --outfile <path> --append--output
        short opts: -o <path> -A
        
- format for use with options:
        long opts: --format <format>

- variable object display controls for depth, pointer depth, wether to show
  types, show summary, show location, flat output, use objc "po" style summary.
  
Modified ValueObjectMemory to be able to be created either with a TypeSP or
a ClangASTType.

Switched "memory read" over to use OptionGroup subclasses: one for the outfile
options, one for the command specific options, and one for the format.

llvm-svn: 130334

Switch the EmulateInstruction to use the standard RegisterInfo structure
that is defined in the lldb private types intead of passing the reg kind and
reg num everywhere. EmulateInstruction subclasses also need to provide
RegisterInfo structs given a reg kind and reg num. This eliminates the need
for the GetRegisterName() virtual function and allows more complete information
to be passed around in the read/write register callbacks. Subclasses should
always provide RegiterInfo structs with the generic register info filled in as
well as at least one kind of register number in the RegisterInfo.kinds[] array.

llvm-svn: 130256

are defined as enumerations. Current bits include:

        eEmulateInstructionOptionAutoAdvancePC
        eEmulateInstructionOptionIgnoreConditions

Modified the EmulateInstruction class to have a few more pure virtuals that
can help clients understand how many instructions the emulator can handle:

        virtual bool
        SupportsEmulatingIntructionsOfType (InstructionType inst_type) = 0;


Where instruction types are defined as:

//------------------------------------------------------------------
/// Instruction types
//------------------------------------------------------------------    
typedef enum InstructionType
{
    eInstructionTypeAny,                // Support for any instructions at all (at least one)
    eInstructionTypePrologueEpilogue,   // All prologue and epilogue instructons that push and pop register values and modify sp/fp
    eInstructionTypePCModifying,        // Any instruction that modifies the program counter/instruction pointer
    eInstructionTypeAll                 // All instructions of any kind

}  InstructionType;


This allows use to tell what an emulator can do and also allows us to request
these abilities when we are finding the plug-in interface.

Added the ability for an EmulateInstruction class to get the register names
for any registers that are part of the emulation. This helps with being able
to dump and log effectively.

The UnwindAssembly class now stores the architecture it was created with in
case it is needed later in the unwinding process.

Added a function that can tell us DWARF register names for ARM that goes
along with the source/Utility/ARM_DWARF_Registers.h file: 

        source/Utility/ARM_DWARF_Registers.c
        
Took some of plug-ins out of the lldb_private namespace.

llvm-svn: 130189

llvm-svn: 130156

inline contexts when the deepest most block is not inlined.

Added source path remappings to the lldb_private::Target class that allow it
to remap paths found in debug info so we can find source files that are elsewhere
on the current system.

Fixed disassembly by function name to disassemble inline functions that are
inside other functions much better and to show enough context before the
disassembly output so you can tell where things came from.

Added the ability to get more than one address range from a SymbolContext 
class for the case where a block or function has discontiguous address ranges.

llvm-svn: 130044

pointer to a ValueObject or any of its dependent ValueObjects, and the whole cluster will
stay around as long as that shared pointer stays around.

llvm-svn: 130035

Change code for reading emulation data files to read the new file
format.  (The newly formatted files will go in as a separate commit in a
few minutes).

llvm-svn: 129981

set by default when dumping registers. If you want to see all of the register
sets you can use the "--all" option:

(lldb) register read --all

If you want to just see some register sets, you can currently specify them
by index:

(lldb) register read --set 0 --set 2

We need to get shorter register set names soon so we can specify the register
sets by name without having to type too much. I will make this change soon.

You can also have any integer encoded registers resolve the address values
back to any code or data from the object files using the "--lookup" option.
Below is sample output when stopped in the libc function "puts" with some
const strings in registers:

Process 8973 stopped
* thread #1: tid = 0x2c03, 0x00007fff828fa30f libSystem.B.dylib`puts + 1, stop reason = instruction step into
  frame #0: 0x00007fff828fa30f libSystem.B.dylib`puts + 1
(lldb) register read --lookup 
General Purpose Registers:
  rax          = 0x0000000100000e98  "----------------------------------------------------------------------"
  rbx          = 0x0000000000000000
  rcx          = 0x0000000000000001  
  rdx          = 0x0000000000000000
  rdi          = 0x0000000100000e98  "----------------------------------------------------------------------"
  rsi          = 0x0000000100800000
  rbp          = 0x00007fff5fbff710
  rsp          = 0x00007fff5fbff280
  r8           = 0x0000000000000040  
  r9           = 0x0000000000000000
  r10          = 0x0000000000000000
  r11          = 0x0000000000000246  
  r12          = 0x0000000000000000
  r13          = 0x0000000000000000
  r14          = 0x0000000000000000
  r15          = 0x0000000000000000
  rip          = 0x00007fff828fa30f  libSystem.B.dylib`puts + 1
  rflags       = 0x0000000000000246  
  cs           = 0x0000000000000027  
  fs           = 0x0000000000000000
  gs           = 0x0000000000000000

As we can see, we see two constant strings and the PC (register "rip") is 
showing the code it resolves to.

I fixed the register "--format" option to work as expected.

Added a setting to disable skipping the function prologue when setting 
breakpoints as a target settings variable:

(lldb) settings set target.skip-prologue false

Updated the user settings controller boolean value handler funciton to be able
to take the default value so it can correctly respond to the eVarSetOperationClear
operation.

Did some usability work on the OptionValue classes.

Fixed the "image lookup" command to correctly respond to the "--verbose" 
option and display the detailed symbol context information when looking up
line table entries and functions by name. This previously was only working
for address lookups.

llvm-svn: 129977

llvm-svn: 129935

Add the infrastructure to test instruction emulations automatically.
The idea is that the instruction to be emulated is actually executed
on the hardware to be emulated, with the before and after state of the
hardware being captured and 'freeze-dried' into .dat files.  The
emulation testing code then loads the before & after state from the
.dat file, emulates the instruction using the before state, and
compares the resulting state to the 'after' state.  If they match, the
emulation is accurate, otherwise there is a problem.

The final format of the .dat files needs a bit more work; the plan is
to generalize them a bit and to convert the plain values to key-value pairs. 
But I wanted to get this first pass committed.

This commit adds arm instruction emulation testing to the testsuite, along with
many initial .dat files.

It also fixes a bug in the llvm disassembler, where 32-bit thumb opcodes
were getting their upper & lower 16-bits reversed.

There is a new Instruction sub-class, that is intended to be loaded
from a .dat file rather than read from an executable.  There is also a
new EmulationStateARM class, for handling the before & after states.
EmulationStates for other architetures can be added later when we
emulate their instructions.

llvm-svn: 129832

places that were dumping values for the settings. Centralized all of the
value dumping into a single place. When dumping values that aren't strings
we no longer surround the value with single quotes. When dumping values that
are strings, surround the string value with double quotes. When dumping array
values, assume they are always string values, and don't put quotes around
dictionary values.

llvm-svn: 129826

line tables specify breakpoints can be set in the source. When dumping the
source, the number of breakpoints that can be set on a source line are shown
as a prefix:

(lldb) source list -f test.c -l1 -c222 -b
       1   	#include <stdio.h>
       2   	#include <sys/fcntl.h>
       3   	#include <unistd.h>
       4   	int
       5   	sleep_loop (const int num_secs)
[2]    6   	{
       7   	    int i;
[1]    8   	    for (i=0; i<num_secs; ++i)
       9   	    {
[1]    10  	        printf("%d of %i - sleep(1);\n", i, num_secs);
[1]    11  	        sleep(1);       
       12  	    }
       13  	    return 0;
[1]    14  	}
       15  	
       16  	int 
       17  	main (int argc, char const* argv[])
[1]    18  	{
[1]    19  	    printf("Process: %i\n\n", getpid());
[1]    20  	    puts("Press any key to continue..."); getchar();
[1]    21  	    sleep_loop (20);
       22  	    return 12;
[1]    23  	}

Above we can see there are two breakpoints for line 6 and one breakpoint for
lines 8, 10, 11, 14, 18, 19, 20, 21 and 23. All other lines have no line table
entries for them. This helps visualize the data provided in the debug 
information without having to manually dump all line tables. It also includes
all inline breakpoint that may result for a given file which can also be very
handy to see.

llvm-svn: 129747

threads, and stack frame down in the lldb_private::Process,
lldb_private::Thread, lldb_private::StackFrameList and the 
lldb_private::StackFrame classes. We had some command line
commands that had duplicate versions of the process status
output ("thread list" and "process status" for example). 

Removed the "file" command and placed it where it should
have been: "target create". Made an alias for "file" to
"target create" so we stay compatible with GDB commands.

We can now have multple usable targets in lldb at the
same time. This is nice for comparing two runs of a program
or debugging more than one binary at the same time. The
new command is "target select <target-idx>" and also to see
a list of the current targets you can use the new "target list"
command. The flow in a debug session can be:

(lldb) target create /path/to/exe/a.out
(lldb) breakpoint set --name main
(lldb) run
... hit breakpoint
(lldb) target create /bin/ls
(lldb) run /tmp
Process 36001 exited with status = 0 (0x00000000) 
(lldb) target list
Current targets:
  target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
* target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) target select 0
Current targets:
* target #0: /tmp/args/a.out ( arch=x86_64-apple-darwin, platform=localhost, pid=35999, state=stopped )
  target #1: /bin/ls ( arch=x86_64-apple-darwin, platform=localhost, pid=36001, state=exited )
(lldb) bt
* thread #1: tid = 0x2d03, 0x0000000100000b9a a.out`main + 42 at main.c:16, stop reason = breakpoint 1.1
  frame #0: 0x0000000100000b9a a.out`main + 42 at main.c:16
  frame #1: 0x0000000100000b64 a.out`start + 52

Above we created a target for "a.out" and ran and hit a
breakpoint at "main". Then we created a new target for /bin/ls
and ran it. Then we listed the targest and selected our original
"a.out" program, so we showed two concurent debug sessions
going on at the same time.

llvm-svn: 129695

Add support for "dynamic values" for C++ classes.  This currently only works for "frame var" and for the
expressions that are simple enough to get passed to the "frame var" underpinnings.  The parser code will
have to be changed to also query for the dynamic types & offsets as it is looking up variables.

The behavior of "frame var" is controlled in two ways.  You can pass "-d {true/false} to the frame var
command to get the dynamic or static value of the variables you are printing.

There's also a general setting:

target.prefer-dynamic-value (boolean) = 'true'

which is consulted if you call "frame var" without supplying a value for the -d option.

llvm-svn: 129623

Modified the OptionGroupOptions to be able to specify only some of the options
that should be appended by using the usage_mask in the group defintions and
also provided a way to remap them to a new usage mask after the copy. This 
allows options to be re-used and also targetted for specific option groups.

Modfied the CommandArgumentType to have a new eArgTypePlatform enumeration.
Taught the option parser to be able to automatically use the appropriate
auto completion for a given options if nothing is explicitly specified
in the option definition. So you don't have to specify it in the option
definition tables.

Renamed the default host platform name to "host", and the default platform
hostname to be "localhost".

Modified the "file" and "platform select" commands to make sure all options
and args are good prior to creating a new platform. Also defer the computation
of the architecture in the file command until all options are parsed and the
platform has either not been specified or reset to a new value to avoid
computing the arch more than once.

Switch the PluginManager code over to using llvm::StringRef for string
comparisons and got rid of all the AccessorXXX functions in lieu of the newer
mutex + collection singleton accessors.

llvm-svn: 129483

the CommandInterpreter where it was always being used.

Make sure that Modules can track their object file offsets correctly to
allow opening of sub object files (like the "__commpage" on darwin).

Modified the Platforms to be able to launch processes. The first part of this
move is the platform soon will become the entity that launches your program
and when it does, it uses a new ProcessLaunchInfo class which encapsulates
all process launching settings. This simplifies the internal APIs needed for
launching. I want to slowly phase out process launching from the process
classes, so for now we can still launch just as we used to, but eventually
the platform is the object that should do the launching.

Modified the Host::LaunchProcess in the MacOSX Host.mm to correctly be able
to launch processes with all of the new eLaunchFlag settings. Modified any
code that was manually launching processes to use the Host::LaunchProcess
functions.

Fixed an issue where lldb_private::Args had implicitly defined copy 
constructors that could do the wrong thing. This has now been fixed by adding
an appropriate copy constructor and assignment operator.

Make sure we don't add empty ModuleSP entries to a module list.

Fixed the commpage module creation on MacOSX, but we still need to train
the MacOSX dynamic loader to not get rid of it when it doesn't have an entry
in the all image infos.

Abstracted many more calls from in ProcessGDBRemote down into the 
GDBRemoteCommunicationClient subclass to make the classes cleaner and more
efficient.

Fixed the default iOS ARM register context to be correct and also added support
for targets that don't support the qThreadStopInfo packet by selecting the
current thread (only if needed) and then sending a stop reply packet.

Debugserver can now start up with a --unix-socket (-u for short) and can 
then bind to port zero and send the port it bound to to a listening process
on the other end. This allows the GDB remote platform to spawn new GDB server
instances (debugserver) to allow platform debugging.

llvm-svn: 129351

    
This patch fixes all of the warnings due to unordered initialization lists.

Patch by Marco Minutoli.

llvm-svn: 129290

Fix various things in the instruction emulation code:

    - Add ability to control whether or not the emulator advances the
    PC register (in the emulation state), if the instruction itself
    does not change the pc value..

    - Fix a few typos in asm description strings.

    - Fix bug in the carry flag calculation.

llvm-svn: 129168

Something changed in commit r129112 where a few standard headers vanished from
the include chain when building on Linux.  Fix up by including limits.h for
INT_MAX and PATH_MAX where needed, and stdio.h for printf().

llvm-svn: 129130

This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.

Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.

Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:

LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release, 
Release+Asserts, Debug, Debug+Asserts).

I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.

llvm-svn: 129112

Translate dwarf register numbers to internal register numbers
before trying to look them up in register contexts, in the 
emulation callback functions that read & write the frame registers.

llvm-svn: 129037

Add Emulate and DumpEmulation to Instruction class.

Move InstructionLLVM out of DisassemblerLLVM class.

Add instruction emulation function calls to SBInstruction and SBInstructionList APIs.

llvm-svn: 128956

Convert "process" read/write callback functions to "frame" read/write callback functions.

llvm-svn: 128917

Add the rest of the mechanisms to make ARM instruction emulation usable/possible.

llvm-svn: 128907

GDBRemoteCommunicationServer classes. This involved adding a new packet
named "qSpeedTest" which can test the speed of a packet send/response pairs
using a wide variety of send/recv packet sizes.

Added a few new connection classes: one for shared memory, and one for using
mach messages (Apple only). The mach message stuff is experimental and not 
working yet, but added so I don't lose the code. The shared memory stuff
uses pretty standard calls to setup shared memory.

llvm-svn: 128837

respectively.

llvm-svn: 128720

event.

Modified the ProcessInfo structure to contain all process arguments. Using the
new function calls on MacOSX allows us to see the full process name, not just
the first 16 characters. 

Added a new platform command: "platform process info <pid> [<pid> <pid> ...]"
that can be used to get detailed information for a process including all 
arguments, user and group info and more.

llvm-svn: 128694

llvm-svn: 128685