Seems we emit the parameter ordering number (spuriously named 'arg
number') in the debug info, so there's no need to search through the
variable list to figure out the parameter ordering. This implementation
does 'always' do the work, even in non-optimized debug info (the
previous implementation checked the existence of the 'variables' list on
the subprogram which is only present in optimized builds).

No intended functionality change.

llvm-svn: 183446

When a function is inlined we lazily construct the variables
representing the function's parameters. After that, we add any remaining
unused parameters.

If the function doesn't use all the parameters, or uses them out of
order, then the DWARF would produce them in that order, producing a
parameter order that doesn't match the source.

This fix causes us to always keep the arg variables at the start of the
variable list & in the original order from the source.

llvm-svn: 183297

Also simplify code a bit while there. No functionality change.

llvm-svn: 183076

llvm-svn: 182903

Since the testing case uses ref_addr, which requires version 3+ to work,
we will solve the dwarf version issue first.

This patch also causes failures in one of the bots. I will update the patch
accordingly in my next attempt.

rdar://13926659

llvm-svn: 182867

from a different CU.

We used to print out an error message and fail to generate inlined_subroutine.

If we use ref_addr in the generated DWARF, the DWARF version should be 3 or
above.
rdar://13926659

llvm-svn: 182791

This is to fix PR15408 where an undefined symbol Lline_table_start1 is used.
Since we do not generate the debug_line section when .loc is used,
Lline_table_start1 is not emitted and we can't refer to it when calculating
at_stmt_list for a compile unit.

llvm-svn: 182344

This resolves the last of the PR14606 failures in the GDB 7.5 test
suite by implementing an optional name field for
DW_TAG_imported_modules/DIImportedEntities and using that to implement
C++ namespace aliases (eg: "namespace X = Y;").

llvm-svn: 182328

llvm-svn: 181663

llvm-svn: 181656

This provides basic functionality for imported declarations. For
subprograms and types some amount of lazy construction is supported (so
the definition of a function can proceed the using declaration), but it
still doesn't handle declared-but-not-defined functions (since we don't
generally emit function declarations).

Variable support is really rudimentary at the moment - simply looking up
the existing definition with no support for out of order (declaration,
imported_module, then definition).

llvm-svn: 181392

llvm-svn: 181391

instead of relying upon an extra call to finish initializing.

llvm-svn: 181383

DIBuilder::createImportedDeclaration isn't fully plumbed through (note,
lacking in AsmPrinter/DwarfDebug support) but this seemed like a
sufficiently useful division of code to make the subsequent patch(es)
easier to follow.

llvm-svn: 181364

Apparently we didn't keep an association of Compile Unit metadata nodes
to DIEs so looking up that parental context failed & thus caused no
DW_TAG_imported_modules to be emitted at the CU scope. Fix this by
adding the mapping & sure up the test case to verify this.

llvm-svn: 181339

llvm-svn: 181296

llvm-svn: 181271

because it breaks some buildbots.

This reverts commit 180816.

llvm-svn: 180819

register-indirect address with an offset of 0.
It used to be that a DBG_VALUE is a register-indirect value if the offset
(operand 1) is nonzero. The new convention is that a DBG_VALUE is
register-indirect if the first operand is a register and the second
operand is an immediate. For plain registers use the combination reg, reg.

rdar://problem/13658587

llvm-svn: 180816

to determine whether or not we're on a darwin platform for debug code
emitting.

Solves the problem of a module with no triple on the command line
and no triple in the module using non-gdb ok features on darwin. Fix
up the member-pointers test to check the correct things for cross
platform (DW_FORM_flag is a good prefix).

Unfortunately no testcase because I have no ideas how to test something
without a triple and without a triple in the module yet check
precisely on two platforms. Ideas welcome.

llvm-svn: 180660

Clarify documentation and API to make the difference between register and
register-indirect addressed locations more explicit. Put in a comment
to point out that with the current implementation we cannot specify
a register-indirect location with offset 0 (a breg 0 in DWARF).
No functionality change intended.

rdar://problem/13658587

llvm-svn: 180641

llvm-svn: 180186

llvm-svn: 180000

This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll

I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.

llvm-svn: 179996

This reverts commit r179836 as it seems to have caused test failures.

llvm-svn: 179840

Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.

llvm-svn: 179836

therefore not at all) of the pc or statement list. We also don't
need to emit the compilation dir so save so space and time
and don't bother.

Fix up the testcase accordingly and verify that we don't emit
the attributes or the items that they use.

llvm-svn: 179114

a relocation across sections. Do this for DW_AT_stmt list in the
skeleton CU and check the relocations in the debug_info section.

Add a FIXME for multiple CUs.

llvm-svn: 178969

We used to do "SmallString += CUID", which is incorrect, since CUID will
be truncated to a char.

rdar://problem/13573833

llvm-svn: 178941

There is a difference for FORM_ref_addr between DWARF 2 and DWARF 3+.
Since Eric is against guarding DWARF 2 ref_addr with DarwinGDBCompat, we are
still in discussion on how to handle this.

The correct solution is to update our header to say version 4 instead of version
2 and update tool chains as well.

rdar://problem/13559431

llvm-svn: 178806

the target system.

It was hard-coded to 4 bytes before. I can't get llvm to generate a
ref_addr on a reasonably sized testing case.

rdar://problem/13559431

llvm-svn: 178722

llvm-svn: 178623

llvm-svn: 178386

die values. A lot of DIEs have 10 attributes in C++ code (example
clang), none had more than 12. Seems like a good default.

llvm-svn: 178366

entire original compile unit has been constructed.

llvm-svn: 178365

llvm-svn: 176963

belongs to a different compile unit.

DW_FORM_ref_addr should be used for cross compile-unit reference.

When compiling a large application, we got a dwarfdump verification error where
abstract_origin points to nowhere.

This error can't be reproduced on any testing case in MultiSource.
We may have other cases where we use DW_FORM_ref4 unconditionally.

rdar://problem/13370501

llvm-svn: 176882

Versioned debug info support has been a burden to maintain & also compromised
current debug info verification by causing test cases testing old debug info to
remain rather than being updated to the latest. It also makes it hard to add or
change the metadata schema by requiring various backwards-compatibility in the
DI* hierarchy.

So it's being removed in preparation for new changes to the schema to tidy up
old/unnecessary fields and add new fields needed for new debug info (well, new
to LLVM at least).

The more surprising part of this is the changes to DI*::Verify - this became
necessary due to the changes to AsmWriter. AsmWriter was relying on the version
test to decide which bits of metadata were actually debug info when printing
the comment annotations. Without the version information the tag numbers were
too common & it would print debug info on random metadata that happened to
start with an integer that matched a tag number. Instead this change makes the
Verify functions more precise (just adding "number of operands" checks - not
type checking those operands yet) & relies on that to decide which metadata is
debug info metadata.

llvm-svn: 176838

We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.

The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.

rdar://problem/13342023

llvm-svn: 176605

update testcase accordingly to give the correct name to the cu.

llvm-svn: 175934