it with llvm::sys::Program::FindProgramByName.

llvm-svn: 113709

They will now be represented as:
eSymbolTypeFunction: eSymbolTypeCode with IsDebug() == true
  eSymbolTypeGlobal: eSymbolTypeData with IsDebug() == true and IsExternal() == true
  eSymbolTypeStatic: eSymbolTypeData with IsDebug() == true and IsExternal() == false

This simplifies the logic when dealing with symbols and allows for symbols
to be coalesced into a single symbol most of the time.

Enabled the minimal symbol table for mach-o again after working out all the
kinks. We now get nice concise symbol tables and debugging with DWARF in the
.o files with a debug map in the binary works well again. There were issues
where the SymbolFileDWARFDebugMap symbol file parser was using symbol IDs and
symbol indexes interchangeably. Now that all those issues are resolved 
debugging is working nicely.

llvm-svn: 113678

llvm-svn: 113673

to specify a one-liner (either scripting or lldb command) inline.

Refactored CommandObjectBreakpointCommandAdd::Execute() a little bit and added
some comments.

Sn now, we use:

breakpoint command add -p 1 -o "conditional_break.stop_if_called_from_a()"

to specify a Python one-liner as the callback for breakpoint #1.

llvm-svn: 113672

SBValue to access it.  For now this is just the result of ObjC NSPrintForDebugger,
but could be extended.  Also store the results of the ObjC Object Printer in a
Stream, not a ConstString.

llvm-svn: 113660

Mainly ExecuteFunction should save & restore the currently selected Thread & Frame.

llvm-svn: 113658

When the debugger updates its symbol context, if no thread or frame are selected select the first thread's 0th frame.

llvm-svn: 113657

llvm-svn: 113655

Make sure the address passed into SymbolContext::DumpStopContext() is valid before trying to calculate any offsets.

llvm-svn: 113645

There was a check to make sure that the frame had a valid function before the expression parser would allow decl lookups which was not needed. After removing this you can evaluate expressions correctly when stopped in a frame that only has a symbol or has no symbol context at all.

llvm-svn: 113611

pointed out by Jim Ingham.  The convenient one-liner specification should only
apply when there is only one breakpoint id being specified for the time being.

llvm-svn: 113609

llvm-svn: 113607

up a seciton offset address (SBAddress) within a module that returns a
symbol context (SBSymbolContext). Also added a SBSymbolContextList in 
preparation for adding find/lookup APIs that can return multiple results.

Added a lookup example code that shows how to do address lookups.

llvm-svn: 113599

command for a breakpoint, for example:

(lldb) breakpoint command add -p 1 "conditional_break.stop_if_called_from_a()"

The ScriptInterpreter interface has an extra method:

    /// Set a one-liner as the callback for the breakpoint command.
    virtual void 
    SetBreakpointCommandCallback (CommandInterpreter &interpreter,
                                  BreakpointOptions *bp_options,
                                  const char *oneliner);

to accomplish the above.

Also added a test case to demonstrate lldb's use of breakpoint callback command
to stop at function c() only when its immediate caller is function a().  The
following session shows the user entering the following commands:

1) command source .lldb (set up executable, breakpoint, and breakpoint command)
2) run (the callback mechanism will skip two breakpoints where c()'s immeidate caller is not a())
3) bt (to see that indeed c()'s immediate caller is a())
4) c (to continue and finish the program)

test/conditional_break $ ../../build/Debug/lldb
(lldb) command source .lldb
Executing commands in '.lldb'.
(lldb) file a.out
Current executable set to 'a.out' (x86_64).
(lldb) breakpoint set -n c
Breakpoint created: 1: name = 'c', locations = 1
(lldb) script import sys, os
(lldb) script sys.path.append(os.path.join(os.getcwd(), os.pardir))
(lldb) script import conditional_break
(lldb) breakpoint command add -p 1 "conditional_break.stop_if_called_from_a()"
(lldb) run
run
Launching '/Volumes/data/lldb/svn/trunk/test/conditional_break/a.out'  (x86_64)
(lldb) Checking call frames...
Stack trace for thread id=0x2e03 name=None queue=com.apple.main-thread:
  frame #0: a.out`c at main.c:39
  frame #1: a.out`b at main.c:34
  frame #2: a.out`a at main.c:25
  frame #3: a.out`main at main.c:44
  frame #4: a.out`start
c called from b
Continuing...
Checking call frames...
Stack trace for thread id=0x2e03 name=None queue=com.apple.main-thread:
  frame #0: a.out`c at main.c:39
  frame #1: a.out`b at main.c:34
  frame #2: a.out`main at main.c:47
  frame #3: a.out`start
c called from b
Continuing...
Checking call frames...
Stack trace for thread id=0x2e03 name=None queue=com.apple.main-thread:
  frame #0: a.out`c at main.c:39
  frame #1: a.out`a at main.c:27
  frame #2: a.out`main at main.c:50
  frame #3: a.out`start
c called from a
Stopped at c() with immediate caller as a().
a(1) returns 4
b(2) returns 5
Process 20420 Stopped
* thread #1: tid = 0x2e03, 0x0000000100000de8 a.out`c + 7 at main.c:39, stop reason = breakpoint 1.1, queue = com.apple.main-thread
  36   	
  37   	int c(int val)
  38   	{
  39 ->	    return val + 3;
  40   	}
  41   	
  42   	int main (int argc, char const *argv[])
(lldb) bt
bt
thread #1: tid = 0x2e03, stop reason = breakpoint 1.1, queue = com.apple.main-thread
  frame #0: 0x0000000100000de8 a.out`c + 7 at main.c:39
  frame #1: 0x0000000100000dbc a.out`a + 44 at main.c:27
  frame #2: 0x0000000100000e4b a.out`main + 91 at main.c:50
  frame #3: 0x0000000100000d88 a.out`start + 52
(lldb) c
c
Resuming process 20420
Process 20420 Exited
a(3) returns 6
(lldb) 

llvm-svn: 113596

set the debugger_unique_id with the lldb prefix.

llvm-svn: 113589

The Unwind and RegisterContext subclasses still need
to be finished; none of this code is used by lldb at
this point (unless you call into it by hand).

The ObjectFile class now has an UnwindTable object.

The UnwindTable object has a series of FuncUnwinders
objects (Function Unwinders) -- one for each function
in that ObjectFile we've backtraced through during this
debug session.

The FuncUnwinders object has a few different UnwindPlans.
UnwindPlans are a generic way of describing how to find
the canonical address of a given function's stack frame
(the CFA idea from DWARF/eh_frame) and how to restore the
caller frame's register values, if they have been saved
by this function.

UnwindPlans are created from different sources.  One source is the
eh_frame exception handling information generated by the compiler
for unwinding an exception throw.  Another source is an assembly
language inspection class (UnwindAssemblyProfiler, uses the Plugin
architecture) which looks at the instructions in the funciton
prologue and describes the stack movements/register saves that are
done.

Two additional types of UnwindPlans that are worth noting are
the "fast" stack UnwindPlan which is useful for making a first
pass over a thread's stack, determining how many stack frames there
are and retrieving the pc and CFA values for each frame (enough
to create StackFrameIDs).  Only a minimal set of registers is
recovered during a fast stack walk.  

The final UnwindPlan is an architectural default unwind plan.
These are provided by the ArchDefaultUnwindPlan class (which uses
the plugin architecture).  When no symbol/function address range can
be found for a given pc value -- when we have no eh_frame information
and when we don't have a start address so we can't examine the assembly
language instrucitons -- we have to make a best guess about how to 
unwind.  That's when we use the architectural default UnwindPlan.
On x86_64, this would be to assume that rbp is used as a stack pointer
and we can use that to find the caller's frame pointer and pc value.
It's a last-ditch best guess about how to unwind out of a frame.

There are heuristics about when to use one UnwindPlan versues the other --
this will all happen in the still-begin-written UnwindLLDB subclass of
Unwind which runs the UnwindPlans.

llvm-svn: 113581

and the user didn't specify a particular directory, search for the file 
using the $PATH environment variable.

llvm-svn: 113575

cleaning up the output of many GetDescription objects that are part of a 
symbol context. This fixes an issue where no ranges were being printed out
for functions, blocks and symbols.

llvm-svn: 113571

to be set up the way they are.  Comment out code that removes pending
settings for live instances (after the settings are copied over).

llvm-svn: 113519

Process.h; modify the process.plugins settings variable to use the
correct plugin names.

llvm-svn: 113510

Modify Driver to handle SIGWINCH signals and automatically re-set the
term-width variable.

llvm-svn: 113506

are always printed immediately after the command, before optional
options; also so that in the detailed descriptions of each command
option, the options and their help are output in alphabetical order
(sorted by the short option) rather in whatever order they happened to
be in the table.

llvm-svn: 113496

Renamed the "dispatchqaddr" setting that was coming back for stop reply packets
to be named "qaddr" so that gdb doesn't thing it is a register number. gdb
was checking the first character and assuming "di" was a hex register number
because 'd' is a hex digit. It has been shortened so gdb can safely ignore it.

llvm-svn: 113475

Make get/set variable at the debugger level always set the particular debugger's instance variables rather than
the default variables.

llvm-svn: 113474

llvm-svn: 113438

llvm-svn: 113437

fix a bunch of signed/unsigned comparison warnings, stop evaluating "getsize" every time through the loop.

llvm-svn: 113433

with the Clang parser that prevents us from passing
Objective-C types to functions that expect C types.
This quick hack keeps us in business until that
interaction is fixed.

llvm-svn: 113429

llvm-svn: 113421

llvm-svn: 113408

certain functions from being resolved correctly.

Some functions (particularly varargs functions)
are BitCast before being called, and the problem
was that a CallInst where getCalledValue()
returned a BitCast ConstantExpr was not being
relocated at all.

This problem should now be resolved for the case
of BitCast.

llvm-svn: 113396

llvm-svn: 113372

llvm-svn: 113371

Make sure creating a pending instance doesn't also trigger creating a live instance; also make sure creating a
pending instance uses the specified instance name rather than creating a new one; add brackets to instance names
when searching for and removing pending instances.

llvm-svn: 113370

new change will omit unneeded symbol table entries and coalesce
function entries (N_FUN stab entries) with their linker code
symbol (N_SECT symbols) into only the function symbol to avoid
duplicate symbol table entries. It will also coalesce N_STSYM and
the data linker symbol into just one static data symbol.

llvm-svn: 113363

which controls whether to stop in a function matching the regexp.

llvm-svn: 113335

member variables.

Modified lldb_private::Module to have an accessor that can be used to tell if
a module is a dynamic link editor (dyld) as there are functions in dyld on
darwin that mirror functions in libc (malloc, free, etc) that should not
be used when doing function lookups by name in expressions if there are more
than one match when looking up functions by name.

llvm-svn: 113313

llvm-svn: 113309

expressions correctly.  These produced a result
variable with an initializer but no store
instruction, and the store instruction was as
a result never rewritten to become a store to a
persistent variable.

Now if the result variable has an initializer
but is never used, we generate a (redundant)
store instruction for it, which is then later
rewritten into a (useful) store to the persistent
result variable.

llvm-svn: 113300

Small help text fixes, to make it more consistent and accurate.

Temporarily remove -l option from 'expr' command (at Sean's request).

llvm-svn: 113298