- RDRAND always clears the destination value when a random value is not
  available (i.e. CF == 0). This value is truncated or zero-extended as
  the false boolean value to be returned. Boolean simplification needs
  to skip this 'zext' or 'trunc' node.

llvm-svn: 178312

To enable a load of a call address to be folded with that call, this
load is moved from outside of callseq into callseq. Such a moving
adds a non-glued node (that load) into a glued sequence. This non-glue
load is only removed when DAG selection folds them into a memory form
call instruction. When such instruction selection is disabled, it breaks
DAG schedule.

To prevent that, such moving is disabled when target favors register
indirect call.

Previous workaround disabling CALL32m/CALL64m insn selection is removed.

llvm-svn: 178308

Removed dead code from ObjCARCOpts relating to tracking objc_retainBlocks through the ARC Dataflow analysis. By the time we get to the ARC dataflow analysis, any objc_retainBlock calls are not optimizable.

llvm-svn: 178306

immediate in a register.  I don't believe this should ever fail, but I see no
harm in trying to make this code bullet proof.

I've added an assert to ensure my assumtion is correct.  If the assertion fires
something is wrong and we should fix it, rather then just silently fall back to
SelectionDAG isel.

llvm-svn: 178305

Mips assembler allows following to be used as aliased instructions:
jal $rs for jalr $rs
jal $rd,$rd for jalr $rd,$rs

This patch provides alias definitions in td files and test cases to show the usage.

Contributer: Vladimir Medic
llvm-svn: 178304

llvm-svn: 178303

Go ahead and use the full path for both the .gcno and .gcda files.

llvm-svn: 178302

llvm-svn: 178301

llvm-svn: 178300

llvm-svn: 178299

llvm-svn: 178293

llvm-svn: 178291

Otherwise, the CHECK-NOT's might trigger depending on the host's CPU.

llvm-svn: 178287

Compiling in 32-bit mode on a P7 would assert after 64-bit DAG combines were
added for bswap with load/store. This is because these combines are really only
valid in 64-bit mode, regardless of the CPU (and this was not being checked).

llvm-svn: 178286

Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.

<rdar://problem/13249661>.

llvm-svn: 178285

If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.

Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.

This patch simplifies said code by:

1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).

2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).

This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.

<rdar://problem/13249661>.

llvm-svn: 178284

llvm-svn: 178281

Thanks to Bill Schmidt for pointing this out!

llvm-svn: 178280

llvm-svn: 178279

llvm-svn: 178278

This follows up Ulrich Weigand's work in PPCInstrInfo.td and
PPCInstr64Bit.td by doing the corresponding work for most of the
Altivec patterns.  I have not been able to do anything for the
following classes of instructions:

(1) Vector logicals.  These don't have corresponding intrinsics and
don't have a single obvious vector type.  So far as I can tell I need
to leave these as VRRC.  Affected instructions are:  VAND, VANDC,
VNOR, VOR, VXOR, V_SET0.

(2) Instructions that make use of vector shuffle.  The selection code
promotes all shuffles to v16i8, so any pattern that matches on a
shuffle is constrained.  I haven't found any way to make the patterns
match on their natural types, so I plan to leave these as VRRC.
Affected instructions are:  VMRG*, VSPLTB, VSPLTH, VSPLTW, VPKUHUM,
VPKUWUM.

No change in behavior is anticipated.

llvm-svn: 178277

These are 64-bit load/store with byte-swap, and available on the P7 and the A2.
Like the similar instructions for 16- and 32-bit words, these are matched in the
target DAG-combine phase against load/store-bswap pairs.

llvm-svn: 178276

They should always be zero-extended, not sign extended.  Added test case.

llvm-svn: 178275

llvm-svn: 178256

llvm-svn: 178254

llvm-svn: 178249

Remove noV4T gp-relative instructions.

llvm-svn: 178246

requires that the return type of *r for all iterators r be reference,
where reference is defined in [iterator.requirements.general]/p11 as
iterator_traits<X>::reference, and X is the type of r.

But in CFG.h, the dereference operator of PredIterator and SuccIterator
return pointer, not reference.

Furthermore the nested type reference is value_type&, which is not the
type returned from operator*().

This patch simply makes the iterator::reference type value_type*, which
is what the operator*() returns, and then re-lables the return type as
reference.

From a functionality point of view, the only difference is that the
nested reference type is now value_type* instead of value_type&.

llvm-svn: 178240

llvm-svn: 178236

PPC ISA 2.06 (P7, A2, etc.) has a popcntd instruction. Add this instruction and
tell TTI about it so that popcount-loop recognition will know about it.

llvm-svn: 178233

llvm-svn: 178230

This reverts commit c8d65364223a04b179958a50a4bf0f89b21dd7d2.

This broke a bunch of the buildbots.

llvm-svn: 178222

llvm-svn: 178221

There were a few places where kill flags were not being set correctly, and
where 32-bit instruction variants were being used with 64-bit registers. After
r178180, this code was being triggered causing llc to assert.

llvm-svn: 178220

llvm-svn: 178219

This reverts commit 342d92c7a0adeabc9ab00f3f0d88d739fe7da4c7.

Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.

llvm-svn: 178215

llvm-svn: 178208

form of call in preference to memory indirect on Atom.

In this case, the patch applies the optimization to the code for reloading
spilled registers.

The patch also includes changes to sibcall.ll and movgs.ll, which were
failing on the Atom buildbot after the first patch was applied.

This patch by Sriram Murali.

llvm-svn: 178193

Made sure we were looking a correct section
Added Mips32/64 as an extra check
Updated llvm-objdump to generate symbolic info for Mips relocations

llvm-svn: 178190

expression.  Specifically, this syntax:

 ImmDisp [ BaseReg + Scale*IndexReg + Disp ] 

We don't currently support:

 ImmDisp [ Symbol ]

rdar://13518671

llvm-svn: 178186