bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.

llvm-svn: 85517

the latter is capable of representing either a primitive or an extended type.

llvm-svn: 78713

llvm-svn: 78610

llvm-svn: 72483

llvm-svn: 60487

parameters instead of raw Constants.  This prevents the constants from
being selected by the isel pass, fixing PR2735.

llvm-svn: 57385

with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.

llvm-svn: 56159

is lowered properly and covers everything LowerSELECT_CC did.
Added method printUnsignedImm in AsmPrinter to print uimm16 operands. This
avoid the ugly instruction by instruction checking in printOperand.
Added a swap instruction present in the allegrex core.
Added two conditional instructions present in the allegrex core : MOVZ and MOVN.
They both allow a more efficient SELECT operation for integers.
Also added SELECT patterns to optimize MOVZ and MOVN usage.
The brcond and setcc patterns were cleaned: redundant and suboptimal patterns
were
removed. The suboptimals were replaced by more efficient ones.
Fixed some instructions that were using immZExt16 instead of immSExt16.

llvm-svn: 54724

llvm-svn: 54516

Added fp register clobbering during calls.
Added AsmPrinter support for "fmask", a bitmask that indicates where on the 
stack the fp callee saved registers are.

Fixed the stack frame layout for Mips, now the callee saved regs 
are in the right stack location (a little documentation about how this
stack frame must look like is present in MipsRegisterInfo.cpp).
This was done using the method MipsRegisterInfo::adjustMipsStackFrame
To be more clear, these are examples of what is solves :  

1) FP and RA are also callee saved, and despite they aren't in CSI they 
   must be saved before the fp callee saved registers. 
2) The ABI requires that local varibles are allocated before the callee 
   saved register area, the opposite behavior from the default allocation.
3) CPU and FPU saved register area must be aligned independent of each
   other.

llvm-svn: 54403

Added hi,lo registers to be used,def implicitly. This provides better handle of
instructions which use hi/lo.
Fixes a small BranchAnalysis bug

llvm-svn: 54274

llvm-svn: 54212

llvm-svn: 54167

Added ConstantPool support.

llvm-svn: 53951

Added gp_rel relocations to support addressing small section contents.
Added command line to specify small section threshold in bytes.

llvm-svn: 53869

Added HasABICall and HasAbsoluteCall (equivalent to gcc -mabicall and 
-mno-shared). HasAbsoluteCall is not implemented but HasABICall is the 
default for o32 ABI. Now, both should help into a more accurate 
relocation types implementation. 
Added IsLinux is needed to choose between asm directives.
Instruction name strings cleanup.
AsmPrinter improved.

llvm-svn: 53551

llvm-svn: 53277

important.
- Cleanup in the Subtarget info with addition of new features, not all support
  yet, but they allow the future inclusion of features easier. Among new features,
  we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit
  integer
  and float registers, allegrex vector FPU (VFPU), single float only support.
- TargetMachine now detects allegrex core.
- Added allegrex (Mips32r2) sext_inreg instructions.
- *Added Float Point Instructions*, handling single float only, and
  aliased accesses for 32-bit FPUs.
- Some cleanup in FP instruction formats and FP register classes.
- Calling conventions improved to support mips 32-bit EABI.
- Added Asm Printer support for fp cond codes.
- Added support for sret copy to a return register.
- EABI support added into LowerCALL and FORMAL_ARGS.
- MipsFunctionInfo now keeps a virtual register per function to track the
  sret on function entry until function ret.
- MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...),
  FP cond codes mapping and initial FP Branch Analysis.
- Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond,
  FPCmp
- MipsTargetLowering : handling different FP classes, Allegrex support, sret
  return copy, no homing location within EABI, non 32-bit stack objects
  arguments, and asm constraint for float.

llvm-svn: 53146

MUL is not anymore directly matched because its a pseudoinstruction.
LogicI class fixed to zero-extend immediates. 

llvm-svn: 52036

Added special isel for ADDE,SUBE and new patterns to match SUBC,ADDC

llvm-svn: 52031

Added support for mips little endian arch => mipsel

llvm-svn: 51923

Replace all target specific implicit def instructions with a target independent one: TargetInstrInfo::IMPLICIT_DEF.

llvm-svn: 48380

1. Legalize now always promotes truncstore of i1 to i8. 
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
   X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
   safe.

The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:

_foo:
	fldt	20(%esp)
	fldt	4(%esp)
	faddp	%st(1)
	movl	36(%esp), %eax
	fstps	(%eax)
	ret

instead of:

_foo:
	subl	$4, %esp
	fldt	24(%esp)
	fldt	8(%esp)
	faddp	%st(1)
	fstps	(%esp)
	movl	40(%esp), %eax
	movss	(%esp), %xmm0
	movss	%xmm0, (%eax)
	addl	$4, %esp
	ret

llvm-svn: 46140

llvm-svn: 45667

instead of "ISD::STORE".  This allows us to mark target-specific dag
nodes as storing (such as ppc byteswap stores).  This allows us to remove
more explicit isStore flags from the .td files.

Finally, add a warning for when a .td file contains an explicit 
isStore and tblgen is able to infer it.

llvm-svn: 45654

llvm-svn: 45418

Implicit def instructions, e.g. X86::IMPLICIT_DEF_GR32, are always re-materializable and they should not be spilled.

llvm-svn: 44960

llvm-svn: 44045

adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).

This can only result in tears...

llvm-svn: 44037

Fixed some AsmPrinter issues
Added GLOBAL_OFFSET_TABLE Node handle.

llvm-svn: 44024

Removed all macro code for PIC (goodbye "la").
Support tested with shootout bench.

llvm-svn: 43697

want them later (mips32/64).

llvm-svn: 43380

- Modified instruction format to handle pseudo instructions
- Added LoadAddr SDNode to load symbols.

llvm-svn: 42778

Fixed some comments

llvm-svn: 42271

llvm-svn: 41863

MipsAdd SDNode created to add support to an Add opcode which supports input flag
Added an instruction itinerary to all instruction classes
Added branches with zero cond codes
Now call clobbers all non-callee saved registers
Call w/ register support added
Added DelaySlot to branch and load instructions
Added patterns to handle all setcc, brcond/setcc and MipsAdd instructions

llvm-svn: 41161

llvm-svn: 40132

InOperandList. This gives one piece of important information: # of results
produced by an instruction.
An example of the change:
def ADD32rr  : I<0x01, MRMDestReg, (ops GR32:$dst, GR32:$src1, GR32:$src2),
                 "add{l} {$src2, $dst|$dst, $src2}",
                 [(set GR32:$dst, (add GR32:$src1, GR32:$src2))]>;
=>
def ADD32rr  : I<0x01, MRMDestReg, (outs GR32:$dst), (ins GR32:$src1, GR32:$src2),
                 "add{l} {$src2, $dst|$dst, $src2}",
                 [(set GR32:$dst, (add GR32:$src1, GR32:$src2))]>;

llvm-svn: 40033

llvm-svn: 39759

- Modifications from the last patch included
  (issues pointed by Evan Cheng are now fixed).
- Added more MipsI instructions.
- Added more patterns to match branch instructions.

llvm-svn: 37461