For example,
cur) unittests/ADT/Release/ADTTests
new) unittests/ADT/ADTTests

RUNTIME_BUILD_MODE can be substituted to CMAKE_CFG_INTDIR.

With Make and Ninja, the tree is not built with multiple configurations.
Then, including the build type in target directory doesn't make sense.
See also "How can I build multiple modes without switching?"
http://www.cmake.org/Wiki/CMake_FAQ
CMAKE_CFG_INTDIR is set to "."

With multiple-configuration-aware build system, like Visual Studio, each unittest is built on appropriate directory, for example,
unittests/ADT/Release/ADTTests.exe
CMAKE_CFG_INTDIR is set to build system's variable, like "$(Configuration)" or "$(OutDir)".

Thus, "--param build_config" is also deprecated.

llvm-svn: 173616

This warning fires on:
  Operator::~Operator() {
    llvm_unreachable("should never destroy an Operator");
  }

That seems like a false positive.  I don't see any good way to silence
the warning here, so I'm disabling it.

llvm-svn: 173455

wall time, user time, and system time since a process started.

For walltime, we currently use TimeValue's interface and a global
initializer to compute a close approximation of total process runtime.

For user time, this adds support for an somewhat more precise timing
mechanism -- clock_gettime with the CLOCK_PROCESS_CPUTIME_ID clock
selected.

For system time, we have to do a full getrusage call to extract the
system time from the OS. This is expensive but unavoidable.

In passing, clean up the implementation of the old APIs and fix some
latent bugs in the Windows code. This might have manifested on Windows
ARM systems or other systems with strange 64-bit integer behavior.

The old API for this both user time and system time simultaneously from
a single getrusage call. While this results in fewer system calls, it
also results in a lower precision user time and if only user time is
desired, it introduces a higher overhead. It may be worthwhile to switch
some of the pass timers to not track system time and directly track user
and wall time. The old API also tracked walltime in a confusing way --
it just set it to the current walltime rather than providing any measure
of wall time since the process started the way buth user and system time
are tracked. The new API is more consistent here.

The plan is to eventually implement these methods for a *child* process
by using the wait3(2) system call to populate an rusage struct
representing the whole subprocess execution. That way, after waiting on
a child process its stats will become accurate and cheap to query.

llvm-svn: 171551

llvm-svn: 171430

"check-all" can be executed with 0 status, "check-all does nothing, no tools built."

LLVM_EXTERNAL_CLANG_BUILD=OFF LLVM_BUILD_TOOLS=OFF can reproduce this.
Oscar Fuentes reported this. Thank you.

llvm-svn: 171046

Now we really pass -Wcovered-switch-default if the compiler supports it.

llvm-svn: 171040

llvm-svn: 170539

llvm-svn: 170225

If the local checkout does not have 'git svn' references set up, don't try
to use 'git svn' for version information.

llvm-svn: 169749

Adding CXX_SUPPORTS_COVERED_SWITCH_DEFAULT_FLAG
       C_SUPPORTS_COVERED_SWITCH_DEFAULT_FLAG

This is to handle the wackiness on a Mac host where cmake detects:

CMAKE_CXX_COMPILER == "/usr/bin/c++"
CMAKE_C_COMPILER == "/usr/bin/gcc"

llvm-svn: 168577

llvm-svn: 166503

llvm-svn: 165618

  - Substitute hyphen to underscore, s/-/_/g, as the variable name.
  - Additional parameter can be specified as the name of directory.

e.g.) add_llvm_external_project(clang-tools-extra extra)

  - LLVM_EXTERNAL_CLANG_TOOLS_EXTRA_SOURCE_DIR=/path/to/llvm-srcroot/tools/clang/tools/extra, by default.
  - Build directory is in ${CMAKE_CURRENT_BINARY_DIR}/extra

llvm-svn: 165311

llvm-svn: 163612

llvm-svn: 163131

llvm-svn: 163074

Patch by Brad Smith!

llvm-svn: 163033

This patch allows us to use cmake to specify a cross compiler: target different
than host. In particular, it moves LLVM_DEFAULT_TARGET_TRIPLE and TARGET_TRIPLE
variables from cmake/config-ix.cmake to the toplevel CMakeLists.txt to make them
available at configure time.

Here is the command line that I have used to test my patches to create a Hexagon
cross compiler hosted on x86:

$ cmake -G Ninja -D LLVM_TARGETS_TO_BUILD:STRING=Hexagon -D TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_DEFAULT_TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_TARGET_ARCH:STRING=hexagon-unknown-linux-gnu ..
$ ninja check

llvm-svn: 162219

The patch adds a missing case for the Hexagon target in cmake/config-ix.cmake.

llvm-svn: 162218

llvm-svn: 161505

This patch allows us to use cmake to specify a cross compiler for Hexagon.

In particular, the patch adds a missing case for the target Hexagon in
cmake/config-ix.cmake, and it moves LLVM_DEFAULT_TARGET_TRIPLE and TARGET_TRIPLE
variables from cmake/config-ix.cmake to the toplevel CMakeLists.txt to make them
available at configure time. Here is the command line that I have used to test
my patches:

$ cmake -G Ninja -D BUILD_SHARED_LIBS:BOOL=ON -D LLVM_TARGETS_TO_BUILD:STRING=Hexagon -D TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_DEFAULT_TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_TARGET_ARCH:STRING=hexagon-unknown-linux-gnu -D LLVM_ENABLE_PIC:BOOL=OFF ..
$ ninja check

llvm-svn: 161504

[CMake] add_lit_target: Remove comments about add_dependencies. It is not a bug in cmake that add_custom_target(DEPENDS) would not accept targets but file-level dependencies.

llvm-svn: 161295

cmake: Add LLVM_HOSTTRIPLE. For now, it is same as TARGET_TRIPLE.
llvm-svn: 160609

llvm-svn: 160128

Thanks to Kai.

llvm-svn: 159887

in the abstraction for lit test suites so that the various other layers
of abstraction pick up the same behavioral fix, and so that we still get
a complete list of dependencies for the 'check-all' target.

This should fix the follow-on issues of the same nature with various
other build targets, including Clang targets. Sorry for the churn, and
again thanks to Matt for testing and breaking this more thoroughly.

llvm-svn: 159593

due to strange scoping rules to the actual canonical variable name
within the LLVM CMake build.

No functionality changed.

llvm-svn: 159575

re-used. Also, build in direct support for accumulating a set of lit
parameters, arguments, and testsuites to run as part of a 'check-all'
rule. This sinks 'check-all' from a Clang-specific construct to
a generic construct of the project.

llvm-svn: 159482

only used in the Clang tree, but it seems reasonable to support.

llvm-svn: 159399

a dedicated helper function. This will enable re-using the same logic
for Clang's lit setup, etc.

llvm-svn: 159333

FIXME: Shall we put *.def(s) to the folder?
llvm-svn: 159102

restore support for CMake versions before 2.8.6 -- sorry for the
trouble!

llvm-svn: 158930

Makefiles, the CMake files in every other part of the LLVM tree, and
sanity.

This should also restore the output tree structure of all the unit
tests, sorry for breaking that, and thanks for letting me know.

The fundamental change is to put a CMakeLists.txt file in the unittest
directory, with a single test binary produced from it. This has several
advantages:

- No more weird directory stripping in the unittest macro, allowing it
  to be used more readily in other projects.
- No more directory prefixes on all the source files.
- Allows correct and precise use of LLVM's per-directory dependency
  system.
- Allows use of the checking logic for source files that have not been
  added to the CMake build. This uncovered a file being skipped with
  CMake in LLVM and one in Clang's unit tests.
- Makes Specifying conditional compilation or other custom logic for JIT
  tests easier.

It did require adding the concept of an explicit 'optional' source file
to the CMake build so that the missing-file check can skip cases where
the file is *supposed* to be missing. =]

This is another chunk of refactoring the CMake build in order to make it
usable for other clients like CompilerRT / ASan / TSan.

Note that this is interdependent with a Clang CMake change.

llvm-svn: 158909

a helper function in CMake. This will allow us to share all of this
logic with Clang, and eventually CompilerRT.

llvm-svn: 158896

facilities.

This was only used in one place in LLVM, and was used pervasively (but
with different code!) in Clang. It has no advantages over the standard
CMake facilities and in some cases disadvantages.

llvm-svn: 158889

llvm-svn: 158650

This was previously only done for executables and shared libraries, but not
for modules. As modules are essentially shared libraries (that need to be
dlopened explicitly), threating them the same as shared libraries seems
reasonable. This fixes the LLVM_BUILD_32_BITS build of Polly.

Contributed by: Ondra Hosek  <ondra.hosek@gmail.com>

llvm-svn: 158195

llvm-svn: 158176

llvm-svn: 158171

Remove /Wall from LLVM_ENABLE_WARNINGS (it's useless) and promote 4239
to a level 1 warning.

llvm-svn: 158170