The attached patch adds eValueTypeVector to lldb_private::Value.  The nested struct Vector is patterned after RegisterValue::m_data.buffer.  This change to Value allows ClangExpressionDeclMap::LookupDecl to return vector register data for consumption by InterpreterStackFrame::ResolveValue.  Note that ResolveValue was tweaked slightly to allocate enough memory for vector registers.
 
An immediate result of this patch is that "expr $xmm0" generates the same results on Linux as on the Mac, which is good enough for TestRegisters.py.  In addition, the log of m_memory.PrintData(data_region.m_base, data_region.m_extent) shows that the register content has been resolved successfully.  On the other hand, the output is glaringly empty:
    runCmd: expr $xmm0
    output: (unsigned char __attribute__((ext_vector_type(16)))) $0 = {}
    Expecting sub string: vector_type
    Matched

llvm-svn: 167033

Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file". 
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()

Cleaned up header includes a bit as well.

llvm-svn: 162860

Fixed type lookups to "do the right thing". Prior to this fix, looking up a type using "foo::bar" would result in a type list that contains all types that had "bar" as a basename unless the symbol file was able to match fully qualified names (which our DWARF parser does not). 

This fix will allow type matches to be made based on the basename and then have the types that don't match filtered out. Types by name can be fully qualified, or partially qualified with the new "bool exact_match" parameter to the Module::FindTypes() method.

This fixes some issue that we discovered with dynamic type resolution as well as improves the overall type lookups in LLDB.

llvm-svn: 153482

I started work on being able to add symbol files after a debug session
had started with a new "target symfile add" command and quickly ran into
problems with stale Address objects in breakpoint locations that had 
lldb_private::Section pointers into modules that had been removed or 
replaced. This also let to grabbing stale modules from those sections. 
So I needed to thread harded the Address, Section and related objects.

To do this I modified the ModuleChild class to now require a ModuleSP
on initialization so that a weak reference can created. I also changed
all places that were handing out "Section *" to have them hand out SectionSP.
All ObjectFile, SymbolFile and SymbolVendors were inheriting from ModuleChild
so all of the find plug-in, static creation function and constructors now
require ModuleSP references instead of Module *. 

Address objects now have weak references to their sections which can
safely go stale when a module gets destructed. 

This checkin doesn't complete the "target symfile add" command, but it
does get us a lot clioser to being able to do such things without a high
risk of crashing or memory corruption.

llvm-svn: 151336

Objective-C classes.  This allows LLDB to find
ivars declared in class extensions in modules other
than where the debugger is currently stopped (we
already supported this when the debugger was
stopped in the same module as the definition).

This involved the following main changes:

- The ObjCLanguageRuntime now knows how to hunt
  for the authoritative version of an Objective-C
  type.  It looks for the symbol indicating a
  definition, and then gets the type from the
  module containing that symbol.

- ValueObjects now report their type with a
  potential override, and the override is set if
  the type of the ValueObject is an Objective-C
  class or pointer type that is defined somewhere
  other than the original reported type.  This
  means that "frame variable" will always use the
  complete type if one is available.

- The ClangASTSource now looks for the complete
  type when looking for ivars.  This means that
  "expr" will always use the complete type if one
  is available.

- I added a testcase that verifies that both
  "frame variable" and "expr" work.

llvm-svn: 151214

internals. The first part of this is to use a new class:

lldb_private::ExecutionContextRef

This class holds onto weak pointers to the target, process, thread and frame
and it also contains the thread ID and frame Stack ID in case the thread and
frame objects go away and come back as new objects that represent the same
logical thread/frame. 

ExecutionContextRef objcets have accessors to access shared pointers for
the target, process, thread and frame which might return NULL if the backing
object is no longer available. This allows for references to persistent program
state without needing to hold a shared pointer to each object and potentially
keeping that object around for longer than it needs to be. 

You can also "Lock" and ExecutionContextRef (which contains weak pointers)
object into an ExecutionContext (which contains strong, or shared pointers)
with code like

ExecutionContext exe_ctx (my_obj->GetExectionContextRef().Lock());

llvm-svn: 150801

instead of the __repr__. __repr__ is a function that should return an
expression that can be used to recreate an python object and we were using
it to just return a human readable string.

Fixed a crasher when using the new implementation of SBValue::Cast(SBType).

Thread hardened lldb::SBValue and lldb::SBWatchpoint and did other general
improvements to the API.

Fixed a crasher in lldb::SBValue::GetChildMemberWithName() where we didn't
correctly handle not having a target.

llvm-svn: 149743

llvm-svn: 143393

not saying that its children are load addresses.

llvm-svn: 140921

shared pointers.

Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.

Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size. 

Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.

llvm-svn: 140298

 - introduced two new classes ValueObjectConstResultChild and ValueObjectConstResultImpl: the first one is a ValueObjectChild obtained from
   a ValueObjectConstResult, the second is a common implementation backend for VOCR and VOCRCh of method calls meant to read through pointers stored
   in frozen objects ; now such reads transparently move from host to target as required
 - as a consequence of the above, removed code that made target-memory copies of expression results in several places throughout LLDB, and also
   removed code that enabled to recognize an expression result VO as such
 - introduced a new GetPointeeData() method in ValueObject that lets you read a given amount of objects of type T from a VO
   representing a T* or T[], and doing dereferences transparently
   in private layer it returns a DataExtractor ; in public layer it returns an instance of a newly created lldb::SBData
 - as GetPointeeData() does the right thing for both frozen and non-frozen ValueObject's, reimplemented ReadPointedString() to use it
   en lieu of doing the raw read itself
 - introduced a new GetData() method in ValueObject that lets you get a copy of the data that backs the ValueObject (for pointers,
   this returns the address without any previous dereferencing steps ; for arrays it actually reads the whole chunk of memory)
   in public layer this returns an SBData, just like GetPointeeData()
 - introduced a new CreateValueFromData() method in SBValue that lets you create a new SBValue from a chunk of data wrapped in an SBData
   the limitation to remember for this kind of SBValue is that they have no address: extracting the address-of for these objects (with any
   of GetAddress(), GetLoadAddress() and AddressOf()) will return invalid values
 - added several tests to check that "p"-ing objects (STL classes, char* and char[]) will do the right thing
Solved a bug where global pointers to global variables were not dereferenced correctly for display
New target setting "max-string-summary-length" gives the maximum number of characters to show in a string when summarizing it, instead of the hardcoded 128
Solved a bug where the summary for char[] and char* would not be shown if the ValueObject's were dumped via the "p" command
Removed m_pointers_point_to_load_addrs from ValueObject. Introduced a new m_address_type_of_children, which each ValueObject can set to tell the address type
 of any pointers and/or references it creates. In the current codebase, this is load address most of the time (the only notable exception being file
 addresses that generate file address children UNLESS we have a live process)
Updated help text for summary-string
Fixed an issue in STL formatters where std::stlcontainer::iterator would match the container's synthetic children providers
Edited the syntax and help for some commands to have proper argument types

llvm-svn: 139160

variables prior to running your binary. Zero filled sections now get
section data correctly filled with zeroes when Target::ReadMemory
reads from the object file section data.

Added new option groups and option values for file lists. I still need
to hook up all of the options to "target variable" to allow more complete
introspection by file and shlib.

Added the ability for ValueObjectVariable objects to be created with
only the target as the execution context. This allows them to be read
from the object files through Target::ReadMemory(...). 

Added a "virtual Module * GetModule()" function to the ValueObject
class. By default it will look to the parent variable object and
return its module. The module is needed when we have global variables
that have file addresses (virtual addresses that are specific to
module object files) and in turn allows global variables to be displayed
prior to running.

Removed all of the unused proxy object support that bit rotted in 
lldb_private::Value.

Replaced a lot of places that used "FileSpec::Compare (lhs, rhs) == 0" code
with the more efficient "FileSpec::Equal (lhs, rhs)".

Improved logging in GDB remote plug-in.

llvm-svn: 134579

level in the public API. 

Also modified the ValueObject values to be able to display global variables
without having a valid running process. The globals will read themselves from
the object file section data if there is no process, and from the process if
there is one.

Also fixed an issue where modifications for dynamic types could cause child
values of ValueObjects to not show up if the value was unable to evaluate
itself (children of NULL pointer objects).

llvm-svn: 134102

llvm-svn: 132304

pointer to a ValueObject or any of its dependent ValueObjects, and the whole cluster will
stay around as long as that shared pointer stays around.

llvm-svn: 130035

Convert ValueObject to explicitly maintain the Execution Context in which they were created, and then use that when they update themselves.  That means all the ValueObject evaluate me type functions that used to require a Frame object now do not.  I didn't remove the SBValue API's that take this now useless frame, but I added ones that don't require the frame, and marked the SBFrame taking ones as deprecated.

llvm-svn: 128593

now, in addition to cpu type/subtype and architecture flavor, contains:
- byte order (big endian, little endian)
- address size in bytes
- llvm::Triple for true target triple support and for more powerful plug-in
  selection.

llvm-svn: 125602

llvm-svn: 124250

the way LLDB lazily gets complete definitions for types within the debug info.
When we run across a class/struct/union definition in the DWARF, we will only
parse the full definition if we need to. This works fine for top level types
that are assigned directly to variables and arguments, but when we have a 
variable with a class, lets say "A" for this example, that has a member:
"B *m_b". Initially we don't need to hunt down a definition for this class
unless we are ever asked to do something with it ("expr m_b->getDecl()" for
example). With my previous approach to lazy type completion, we would be able
to take a "A *a" and get a complete type for it, but we wouldn't be able to
then do an "a->m_b->getDecl()" unless we always expanded all types within a
class prior to handing out the type. Expanding everything is very costly and
it would be great if there were a better way.

A few months ago I worked with the llvm/clang folks to have the 
ExternalASTSource class be able to complete classes if there weren't completed
yet:

class ExternalASTSource {
....

    virtual void
    CompleteType (clang::TagDecl *Tag);
    
    virtual void 
    CompleteType (clang::ObjCInterfaceDecl *Class);
};

This was great, because we can now have the class that is producing the AST
(SymbolFileDWARF and SymbolFileDWARFDebugMap) sign up as external AST sources
and the object that creates the forward declaration types can now also
complete them anywhere within the clang type system.

This patch makes a few major changes:
- lldb_private::Module classes now own the AST context. Previously the TypeList
  objects did.
- The DWARF parsers now sign up as an external AST sources so they can complete
  types.
- All of the pure clang type system wrapper code we have in LLDB (ClangASTContext,
  ClangASTType, and more) can now be iterating through children of any type,
  and if a class/union/struct type (clang::RecordType or ObjC interface) 
  is found that is incomplete, we can ask the AST to get the definition. 
- The SymbolFileDWARFDebugMap class now will create and use a single AST that
  all child SymbolFileDWARF classes will share (much like what happens when
  we have a complete linked DWARF for an executable).
  
We will need to modify some of the ClangUserExpression code to take more 
advantage of this completion ability in the near future. Meanwhile we should
be better off now that we can be accessing any children of variables through
pointers and always be able to resolve the clang type if needed.

llvm-svn: 123613

RegisterContext* - normally this is retrieved from the ExecutionContext's
StackFrame but when we need to evaluate an expression while creating
the stack frame list this can be a little tricky.

Add DW_OP_deref_size, needed for the _sigtramp FDE expression.

Add support for processing DWARF expressions in RegisterContextLLDB.

Update callers to DWARFExpression::Evaluate.

llvm-svn: 119885

cases when getting the clang type:
- need only a forward declaration
- need a clang type that can be used for layout (members and args/return types)
- need a full clang type

This allows us to partially parse the clang types and be as lazy as possible.
The first case is when we just need to declare a type and we will complete it
later. The forward declaration happens only for class/union/structs and enums.
The layout type allows us to resolve the full clang type _except_ if we have
any modifiers on a pointer or reference (both R and L value). In this case
when we are adding members or function args or return types, we only need to
know how the type will be laid out and we can defer completing the pointee
type until we later need it. The last type means we need a full definition for
the clang type.

Did some renaming of some enumerations to get rid of the old "DC" prefix (which
stands for DebugCore which is no longer around).

Modified the clang namespace support to be almost ready to be fed to the
expression parser. I made a new ClangNamespaceDecl class that can carry around
the AST and the namespace decl so we can copy it into the expression AST. I
modified the symbol vendor and symbol file plug-ins to use this new class.

llvm-svn: 118976

debug information and you evaluated an expression, a crash would occur as a
result of an unchecked pointer.

Added the ability to get the expression path for a ValueObject. For a rectangle
point child "x" the expression path would be something like: "rect.top_left.x".
This will allow GUI and command lines to get ahold of the expression path for
a value object without having to explicitly know about the hierarchy. This
means the ValueObject base class now has a "ValueObject *m_parent;" member.
All ValueObject subclasses now correctly track their lineage and are able
to provide value expression paths as well.

Added a new "--flat" option to the "frame variable" to allow for flat variable
output. An example of the current and new outputs:

(lldb) frame variable 
argc = 1
argv = 0x00007fff5fbffe80
pt = {
  x = 2
  y = 3
}
rect = {
  bottom_left = {
    x = 1
    y = 2
  }
  top_right = {
    x = 3
    y = 4
  }
}
(lldb) frame variable --flat 
argc = 1
argv = 0x00007fff5fbffe80
pt.x = 2
pt.y = 3
rect.bottom_left.x = 1
rect.bottom_left.y = 2
rect.top_right.x = 3
rect.top_right.y = 4


As you can see when there is a lot of hierarchy it can help flatten things out.
Also if you want to use a member in an expression, you can copy the text from
the "--flat" output and not have to piece it together manually. This can help
when you want to use parts of the STL in expressions:

(lldb) frame variable --flat
argc = 1
argv = 0x00007fff5fbffea8
hello_world._M_dataplus._M_p = 0x0000000000000000
(lldb) expr hello_world._M_dataplus._M_p[0] == '\0'

llvm-svn: 116532

adding methods to C++ and objective C classes. In order to make methods, we
need the function prototype which means we need the arguments. Parsing these
could cause a circular reference that caused an  assertion.

Added a new typedef for the clang opaque types which are just void pointers:
lldb::clang_type_t. This appears in lldb-types.h.

This was fixed by enabling struct, union, class, and enum types to only get
a forward declaration when we make the clang opaque qual type for these
types. When they need to actually be resolved, lldb_private::Type will call
a new function in the SymbolFile protocol to resolve a clang type when it is
not fully defined (clang::TagDecl::getDefinition() returns NULL). This allows
us to be a lot more lazy when parsing clang types and keeps down the amount
of data that gets parsed into the ASTContext for each module. 

Getting the clang type from a "lldb_private::Type" object now takes a boolean
that indicates if a forward declaration is ok:

    clang_type_t lldb_private::Type::GetClangType (bool forward_decl_is_ok);
    
So function prototypes that define parameters that are "const T&" can now just
parse the forward declaration for type 'T' and we avoid circular references in
the type system.

llvm-svn: 115012

Replace the vestigial Value::GetOpaqueCLangQualType with the more correct Value::GetValueOpaqueClangQualType.

But mostly, move the ObjC Trampoline handling code from the MacOSX dyld plugin to the AppleObjCRuntime classes.

llvm-svn: 114935

(lldb) frame variable --location

Where the address of variables wasn't being formatted consistently.

llvm-svn: 114266

to symbolicate things without the need for a valid process subclass.

llvm-svn: 113895

debug map showed that the location lists in the .o files needed some 
refactoring in order to work. The case that was failing was where a function
that was in the "__TEXT.__textcoal_nt" in the .o file, and in the 
"__TEXT.__text" section in the main executable. This made symbol lookup fail
due to the way we were finding a real address in the debug map which was
by finding the section that the function was in in the .o file and trying to
find this in the main executable. Now the section list supports finding a
linked address in a section or any child sections. After fixing this, we ran
into issue that were due to DWARF and how it represents locations lists. 
DWARF makes a list of address ranges and expressions that go along with those
address ranges. The location addresses are expressed in terms of a compile
unit address + offset. This works fine as long as nothing moves around. When
stuff moves around and offsets change between the remapped compile unit base
address and the new function address, then we can run into trouble. To deal
with this, we now store supply a location list slide amount to any location
list expressions that will allow us to make the location list addresses into
zero based offsets from the object that owns the location list (always a
function in our case). 

With these fixes we can now re-link random address ranges inside the debugger
for use with our DWARF + debug map, incremental linking, and more.

Another issue that arose when doing the DWARF in the .o files was that GCC
4.2 emits a ".debug_aranges" that only mentions functions that are externally
visible. This makes .debug_aranges useless to us and we now generate a real
address range lookup table in the DWARF parser at the same time as we index
the name tables (that are needed because .debug_pubnames is just as useless).
llvm-gcc doesn't generate a .debug_aranges section, though this could be 
fixed, we aren't going to rely upon it.

Renamed a bunch of "UINT_MAX" to "UINT32_MAX".

llvm-svn: 113829

no elements so that they at least have 1 element. 

Added the ability to show the declaration location of variables to the 
"frame variables" with the "--show-declaration" option ("-c" for short).

Changed the "frame variables" command over to use the value object code
so that we use the same code path as the public API does when accessing and
displaying variable values.

llvm-svn: 113733

function statics, file globals and static variables) that a frame contains. 
The StackFrame objects can give out ValueObjects instances for
each variable which allows us to track when a variable changes and doesn't
depend on variable names when getting value objects.

StackFrame::GetVariableList now takes a boolean to indicate if we want to
get the frame compile unit globals and static variables.

The value objects in the stack frames can now correctly track when they have
been modified. There are a few more tweaks needed to complete this work. The
biggest issue is when stepping creates partial stacks (just frame zero usually)
and causes previous stack frames not to match up with the current stack frames
because the previous frames only has frame zero. We don't really want to 
require that all previous frames be complete since stepping often must check
stack frames to complete their jobs. I will fix this issue tomorrow.

llvm-svn: 112800

llvm-svn: 105712

llvm-svn: 105619