llvm-svn: 164124

FCAs. This is essential in order to promote allocas that are used in
struct returns by frontends like Clang. The FCA load would block the
rest of the pass from firing, resulting is significant regressions with
the bullet benchmark in the nightly test suite.

Thanks to Duncan for repeated discussions about how best to do this, and
to both him and Benjamin for review.

This appears to have blocked many places where the pass tries to fire,
and so I'm expect somewhat different results with this fix added.

As with the last big patch, I'm including a change to enable the SROA by
default *temporarily*. Ben is going to remove this as soon as the LNT
bots pick up the patch. I'm just trying to get a round of LNT numbers
from the stable machines in the lab.

NOTE: Four clang tests are expected to fail in the brief window where
this is enabled. Sorry for the noise!

llvm-svn: 164119

What we have so far:
- Some clang test failures (these were known already)

- Perf results are mixed, some big regressions
  http://llvm.org/perf/db_default/v4/nts/3844
  http://llvm.org/perf/db_default/v4/nts/3845

  bullet suffers a lot. matmul is interesting: slower scalar code, faster with -vectorize.

- Some dragonegg selfhost bots crash in SROA during selfhost now
  http://lab.llvm.org:8011/builders/dragonegg-x86_64-linux-gcc-4.6-self-host-checks/builds/1632
  http://lab.llvm.org:8011/builders/dragonegg-x86_64-linux-gcc-4.5-self-host/builds/1891

llvm-svn: 163968

new one, and add support for running the new pass in that mode and in
that slot of the pass manager. With this the new pass can completely
replace the old one within the pipeline.

The strategy for enabling or disabling the SSAUpdater logic is to do it
by making the requirement of the domtree analysis optional. By default,
it is required and we get the standard mem2reg approach. This is usually
the desired strategy when run in stand-alone situations. Within the
CGSCC pass manager, we disable requiring of the domtree analysis and
consequentially trigger fallback to the SSAUpdater promotion.

In theory this would allow the pass to re-use a domtree if one happened
to be available even when run in a mode that doesn't require it. In
practice, it lets us have a single pass rather than two which was
simpler for me to wrap my head around.

There is a hidden flag to force the use of the SSAUpdater code path for
the purpose of testing. The primary testing strategy is just to run the
existing tests through that path. One notable difference is that it has
custom code to handle lifetime markers, and one of the tests has been
enhanced to exercise that code.

This has survived a bootstrap and the test suite without serious
correctness issues, however my run of the test suite produced *very*
alarming performance numbers. I don't entirely understand or trust them
though, so more investigation is on-going.

To aid my understanding of the performance impact of the new SROA now
that it runs throughout the optimization pipeline, I'm enabling it by
default in this commit, and will disable it again once the LNT bots have
picked up one iteration with it. I want to get those bots (which are
much more stable) to evaluate the impact of the change before I jump to
any conclusions.

NOTE: Several Clang tests will fail because they run -O3 and check the
result's order of output. They'll go back to passing once I disable it
again.

llvm-svn: 163965

being busy testing this...

llvm-svn: 163890

This is essentially a ground up re-think of the SROA pass in LLVM. It
was initially inspired by a few problems with the existing pass:
- It is subject to the bane of my existence in optimizations: arbitrary
  thresholds.
- It is overly conservative about which constructs can be split and
  promoted.
- The vector value replacement aspect is separated from the splitting
  logic, missing many opportunities where splitting and vector value
  formation can work together.
- The splitting is entirely based around the underlying type of the
  alloca, despite this type often having little to do with the reality
  of how that memory is used. This is especially prevelant with unions
  and base classes where we tail-pack derived members.
- When splitting fails (often due to the thresholds), the vector value
  replacement (again because it is separate) can kick in for
  preposterous cases where we simply should have split the value. This
  results in forming i1024 and i2048 integer "bit vectors" that
  tremendously slow down subsequnet IR optimizations (due to large
  APInts) and impede the backend's lowering.

The new design takes an approach that fundamentally is not susceptible
to many of these problems. It is the result of a discusison between
myself and Duncan Sands over IRC about how to premptively avoid these
types of problems and how to do SROA in a more principled way. Since
then, it has evolved and grown, but this remains an important aspect: it
fixes real world problems with the SROA process today.

First, the transform of SROA actually has little to do with replacement.
It has more to do with splitting. The goal is to take an aggregate
alloca and form a composition of scalar allocas which can replace it and
will be most suitable to the eventual replacement by scalar SSA values.
The actual replacement is performed by mem2reg (and in the future
SSAUpdater).

The splitting is divided into four phases. The first phase is an
analysis of the uses of the alloca. This phase recursively walks uses,
building up a dense datastructure representing the ranges of the
alloca's memory actually used and checking for uses which inhibit any
aspects of the transform such as the escape of a pointer.

Once we have a mapping of the ranges of the alloca used by individual
operations, we compute a partitioning of the used ranges. Some uses are
inherently splittable (such as memcpy and memset), while scalar uses are
not splittable. The goal is to build a partitioning that has the minimum
number of splits while placing each unsplittable use in its own
partition. Overlapping unsplittable uses belong to the same partition.
This is the target split of the aggregate alloca, and it maximizes the
number of scalar accesses which become accesses to their own alloca and
candidates for promotion.

Third, we re-walk the uses of the alloca and assign each specific memory
access to all the partitions touched so that we have dense use-lists for
each partition.

Finally, we build a new, smaller alloca for each partition and rewrite
each use of that partition to use the new alloca. During this phase the
pass will also work very hard to transform uses of an alloca into a form
suitable for promotion, including forming vector operations, speculating
loads throguh PHI nodes and selects, etc.

After splitting is complete, each newly refined alloca that is
a candidate for promotion to a scalar SSA value is run through mem2reg.

There are lots of reasonably detailed comments in the source code about
the design and algorithms, and I'm going to be trying to improve them in
subsequent commits to ensure this is well documented, as the new pass is
in many ways more complex than the old one.

Some of this is still a WIP, but the current state is reasonbly stable.
It has passed bootstrap, the nightly test suite, and Duncan has run it
successfully through the ACATS and DragonEgg test suites. That said, it
remains behind a default-off flag until the last few pieces are in
place, and full testing can be done.

Specific areas I'm looking at next:
- Improved comments and some code cleanup from reviews.
- SSAUpdater and enabling this pass inside the CGSCC pass manager.
- Some datastructure tuning and compile-time measurements.
- More aggressive FCA splitting and vector formation.

Many thanks to Duncan Sands for the thorough final review, as well as
Benjamin Kramer for lots of review during the process of writing this
pass, and Daniel Berlin for reviewing the data structures and algorithms
and general theory of the pass. Also, several other people on IRC, over
lunch tables, etc for lots of feedback and advice.

llvm-svn: 163883

llvm-svn: 163808

This disables malloc-specific optimization when -fno-builtin (or -ffreestanding)
is specified. This has been a problem for a long time but became more severe
with the recent memory builtin improvements.

Since the memory builtin functions are used everywhere, this required passing
TLI in many places. This means that functions that now have an optional TLI
argument, like RecursivelyDeleteTriviallyDeadFunctions, won't remove dead
mallocs anymore if the TLI argument is missing. I've updated most passes to do
the right thing.

Fixes PR13694 and probably others.

llvm-svn: 162841

The "findUsedStructTypes" method is very expensive to run. It needs to be
optimized so that LTO can run faster. Splitting this method out of the Module
class will help this occur. For instance, it can keep a list of seen objects so
that it doesn't process them over and over again.

llvm-svn: 161228

encounter an invoke of an allocation function. This should fix the dragonegg
bootstrap. Testcase to follow, later.

llvm-svn: 160757

Darwin bootstrap. Testcase exists but isn't fully reduced, I expect to commit
the testcase this evening.

llvm-svn: 160693

might be deliberate "one time" leaks, so that leak checkers can find them.
This is a reapply of r160602 with the fix that this time I'm committing the
code I thought I was committing last time; the I->eraseFromParent() goes
*after* the break out of the loop.

llvm-svn: 160664

llvm-svn: 160603

r160529 that was subsequently reverted. The fix was to not call
GV->eraseFromParent() right before the caller does the same. The existing
testcases already caught this bug if run under valgrind.

llvm-svn: 160602

llvm-svn: 160532

memory. This makes clang play nice with leak checkers.

llvm-svn: 160529

No functionality change.

llvm-svn: 160501

llvm-svn: 160477

llvm-svn: 159546

This was always part of the VMCore library out of necessity -- it deals
entirely in the IR. The .cpp file in fact was already part of the VMCore
library. This is just a mechanical move.

I've tried to go through and re-apply the coding standard's preferred
header sort, but at 40-ish files, I may have gotten some wrong. Please
let me know if so.

I'll be committing the corresponding updates to Clang and Polly, and
Duncan has DragonEgg.

Thanks to Bill and Eric for giving the green light for this bit of cleanup.

llvm-svn: 159421

include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.

The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.

llvm-svn: 159312

Original commit message:

If a constant or a function has linkonce_odr linkage and unnamed_addr, mark it
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.

llvm-svn: 159272

hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.

llvm-svn: 159136

llvm-svn: 159112

llvm-svn: 159104

This allows the user/front-end to specify a model that is better
than what LLVM would choose by default. For example, a variable
might be declared as

  @x = thread_local(initialexec) global i32 42

if it will not be used in a shared library that is dlopen'ed.

If the specified model isn't supported by the target, or if LLVM can
make a better choice, a different model may be used.

llvm-svn: 159077

sorry for the churn :S  enough for today; going to sleep.

llvm-svn: 158953

remove extractMallocCallFromBitCast, since it was tailor maded for its sole user. Update GlobalOpt accordingly.

llvm-svn: 158952

linkonce linkage. For example, it is not valid to add unnamed_addr.

This also fixes a crash in g++.dg/opt/static5.C.

llvm-svn: 158528

globaldce. Globaldce was already removing linkonce globals, but globalopt was
not.

llvm-svn: 158476

llvm-svn: 157885

llvm-svn: 157556

inline threshold if the global inline threshold is lower (as for -Oz).

Reviewed by Chandler Carruth and Bill Wendling.

llvm-svn: 157323

the address of a function.

llvm-svn: 156703

and expose it as a utility class rather than as free function wrappers.

The simple free-function interface works well for the bugpoint-specific
pass's uses of code extraction, but in an upcoming patch for more
advanced code extraction, they simply don't expose a rich enough
interface. I need to expose various stages of the process of doing the
code extraction and query information to decide whether or not to
actually complete the extraction or give up.

Rather than build up a new predicate model and pass that into these
functions, just take the class that was actually implementing the
functions and lift it up into a proper interface that can be used to
perform code extraction. The interface is cleaned up and re-documented
to work better in a header. It also is now setup to accept the blocks to
be extracted in the constructor rather than in a method.

In passing this essentially reverts my previous commit here exposing
a block-level query for eligibility of extraction. That is no longer
necessary with the more rich interface as clients can query the
extraction object for eligibility directly. This will reduce the number
of walks of the input basic block sequence by quite a bit which is
useful if this enters the normal optimization pipeline.

llvm-svn: 156163

llvm-svn: 154793

As has been suggested by Duncan and others, Early-CSE and GVN should
do similar redundancy elimination, but Early-CSE is much less expensive.
Most of my autovectorization benchmarks show a performance regresion, but
all of these are < 0.1%, and so I think that it is still worth using
the less expensive pass.

llvm-svn: 154673

obviously cannot know that this code is present, let alone used. So prevent the
internalize pass from internalizing those global values which code-gen may
insert.

llvm-svn: 154645

Yea, 'NumCallerCallersAnalyzed' isn't a great name, suggestions welcome.

llvm-svn: 154492

llvm-svn: 153902