llvm-svn: 59154

llvm-svn: 59153

- Rename SetSVal to BindLoc
- Add BindDecl
- Add BindExpr

GRState:
- Environment now binds to Stmt* instead of Expr*.  This is needed for processing ObjCForCollectionStmt (essentially the declaration of the the 'element' variable can have an SVal attached to it).
- BindDecl no longer accepts Expr* for the initialization value; use SVal* instead.

llvm-svn: 59152

StoreManager::BindDecl now takes an SVal* for the initialization value instead of an Expr* (which can be null).  Lazy symbolication of conjured symbols is now the sole responsibility of GRExprEngine.

llvm-svn: 59151

functions for built-in operators, e.g., the builtin

  bool operator==(int const*, int const*)

can be used for the expression "x1 == x2" given:

  struct X {
    operator int const*();
  } x1, x2;

The scheme for handling these built-in operators is relatively simple:
for each candidate required by the standard, create a special kind of
candidate function for the built-in. If overload resolution picks the
built-in operator, we perform the appropriate conversions on the
arguments and then let the normal built-in operator take care of it. 

There may be some optimization opportunity left: if we can reduce the
number of built-in operator overloads we generate, overload resolution
for these cases will go faster. However, one must be careful when
doing this: GCC generates too few operator overloads in our little
test program, and fails to compile it because none of the overloads it
generates match.

Note that we only support operator overload for non-member binary
operators at the moment. The other operators will follow.

As part of this change, ImplicitCastExpr can now be an lvalue.

llvm-svn: 59148

llvm-svn: 59130

llvm-svn: 59129

what "cond.?" means, and this avoids quoting).

llvm-svn: 59128

llvm-svn: 59127

This pushes it a lot closer to being able to deal with most of the stuff 
CodeGen's constant expression evaluator knows how to deal with.  This 
also fixes PR3003.

The test could possibly use some improvement, but this'll work for now.  
Test 6 is inspired by PR3003; the other tests are mostly just designed
to exercise the new code.  The reason for the funny structure of the 
tests is that type fixing for arrays inside of structs is the only place 
in Sema that calls tryEvaluate, at least for the moment.

llvm-svn: 59125

This cuts another 200 lines off expr.ll, forming 23 selects.

llvm-svn: 59124

This happens for stuff like this:

x = cond1 || cond2 || cond3 || cond4;

llvm-svn: 59123

constant folding.

llvm-svn: 59121

 - Split out "simple" statements which can easily handle IR generation
   when there is no insert point. These are generally statements which
   start by emitting a new block or are only containers for other
   statements.

 - This fixes a regression in emitting dummy blocks, notably for case
   statements.

 - This also fixes spurious emission of a number of debug stoppoint
   intrinsic instructions.

Remove unneeded sw.body block, just clear the insertion point.

Lift out CodeGenFunction::EmitStopPoint which calls into the
CGDebugInfo class when generating debug info.

Normalize definitions of Emit{Break,Continue}Stmt and usage of
ErrorUnsupported.

llvm-svn: 59118

codegen stuff like "if (!(X && Y))"

llvm-svn: 59115

shrinks code yet again by a bit.

llvm-svn: 59114

CodeGenFunction.cpp.  Change VisitConditionalOperator to use
constant fold instead of codegen'ing a constant conditional.

Change ForStmt to use EmitBranchOnBoolExpr, this shrinks
expr.c very slightly to 40239 lines.

llvm-svn: 59113

have a condition that is an &&/||.  Before we used to compile things like this:

int test() {
  if (x && y) foo(); else bar();
}

into:

	%0 = load i32* @x		; <i32> [#uses=1]
	%1 = icmp ne i32 %0, 0		; <i1> [#uses=1]
	br i1 %1, label %land_rhs, label %land_cont

land_rhs:		; preds = %entry
	%2 = load i32* @y		; <i32> [#uses=1]
	%3 = icmp ne i32 %2, 0		; <i1> [#uses=1]
	br label %land_cont

land_cont:		; preds = %land_rhs, %entry
	%4 = phi i1 [ false, %entry ], [ %3, %land_rhs ]		; <i1> [#uses=1]
	br i1 %4, label %ifthen, label %ifelse

ifthen:		; preds = %land_cont
	%call = call i32 (...)* @foo()		; <i32> [#uses=0]
	br label %ifend

ifelse:		; preds = %land_cont
	%call1 = call i32 (...)* @bar()		; <i32> [#uses=0]
	br label %ifend

ifend:		; preds = %ifelse, %ifthen


Now we turn it into the much more svelte code:

        %0 = load i32* @x               ; <i32> [#uses=1]
        %1 = icmp ne i32 %0, 0          ; <i1> [#uses=1]
        br i1 %1, label %land_lhs_true, label %ifelse

land_lhs_true:          ; preds = %entry
        %2 = load i32* @y               ; <i32> [#uses=1]
        %3 = icmp ne i32 %2, 0          ; <i1> [#uses=1]
        br i1 %3, label %ifthen, label %ifelse

ifthen:         ; preds = %land_lhs_true
        %call = call i32 (...)* @foo()          ; <i32> [#uses=0]
        br label %ifend

ifelse:         ; preds = %land_lhs_true, %entry
        %call1 = call i32 (...)* @bar()         ; <i32> [#uses=0]
        br label %ifend

ifend:          ; preds = %ifelse, %ifthen

Note the lack of a phi node.

This shrinks the -O0 .ll file for 176.gcc/expr.c from 43176 to 40267 lines.

llvm-svn: 59111

crashing because we errors are ignored in subexpressions that are not evaluated,
but we still evaluate the result of parents.  This would cause an assertion 
because the erroneous subexpr didn't have its result value set to the right type.

llvm-svn: 59110

llvm-svn: 59105

llvm-svn: 59103

llvm-svn: 59095

Revert to enabling generation of instruction names when not in NDEBUG
mode.

llvm-svn: 59094

 - EmitStmt is no longer required to finish with a current insertion
   point defined (i.e. it does not need to make dummy
   blocks). Instead, it can clear the insertion point in the builder
   which indicates that the current insertion point is unreachable.
 - CodeGenFunction provides HaveInsertPoint and EnsureInsertPoint
   which respectively test if there is an insert point and ensure an
   insertion point exists (by making a dummy block).
 - Clearly mark functions in CodeGenFunction which can be called with
   no insertion point defined. Currently this is a limited set, and
   EmitStmt simply EnsureInsertPoint()s before emitting subsequent IR.

Remove EmitDummyBlock, which is no longer needed. Clients who haven't
already cleared the insertion point (typically via EmitBranch) can do
so by hand.

Remove isDummyBlock, which has effectively been renamed to
HaveInsertPoint.

The main thrust of this change is that we no longer have create dummy
blocks just to destroy them a short time later in EmitBlock in the
common case that there is no unreachable code following something like
a goto. 

Additionally, this means that we are not using the hokey condition in
isDummyBlock that a block without a name is a dummy block. Guess how
well that works when we never emit block names!

llvm-svn: 59089

invariants.

llvm-svn: 59085

llvm-svn: 59081

Patch by Ilya Okonsky!

llvm-svn: 59080

- Added support for ObjCForCollectionStmt
- Fixed bug where expression values would be always set to uninitialized when loops were involved

llvm-svn: 59076

llvm-svn: 59075

llvm-svn: 59061

Introduce a single AST node SizeOfAlignOfExpr for all sizeof and alignof expressions, both of values and types.

llvm-svn: 59057

llvm-svn: 59053

http://developer.apple.com/documentation/Cocoa/Conceptual/ObjectiveC/Articles/chapter_7_section_2.html#//apple_ref/doc/uid/TP30001163-CH18-SW3

Need to modify GRExprEngine, LiveVariables, and UninitializedValues to understand this construct.

llvm-svn: 59049

llvm-svn: 59042

 - Emits an unconditional branch, with extra logic to avoid generating
   spurious branches out of dummy blocks.

llvm-svn: 59037

llvm-svn: 59036

the size of the -O0 output on some cases.  For example, on expr.c from
176.gcc, it shrinks the .ll file from 43164 to 42835 lines, and removed
references to two external symbols.

llvm-svn: 59034

condition is a constant.  This shrinks -O0 codegen by quite a bit
on some cases.

llvm-svn: 59033

llvm-svn: 59032

llvm-svn: 59027