llvm-svn: 53278

llvm-svn: 53277

llvm-svn: 53272

llvm-svn: 53270

llvm-svn: 53227

MachineMemOperands. The pools are owned by MachineFunctions.

This drastically reduces the number of calls to malloc/free made
during the "Emit" phase of scheduling, as well as later phases
in CodeGen. Combined with other changes, this speeds up the
"instruction selection" phase of CodeGen by 10% in some cases.

llvm-svn: 53212

llvm-svn: 53192

llvm-svn: 53179

important.
- Cleanup in the Subtarget info with addition of new features, not all support
  yet, but they allow the future inclusion of features easier. Among new features,
  we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit
  integer
  and float registers, allegrex vector FPU (VFPU), single float only support.
- TargetMachine now detects allegrex core.
- Added allegrex (Mips32r2) sext_inreg instructions.
- *Added Float Point Instructions*, handling single float only, and
  aliased accesses for 32-bit FPUs.
- Some cleanup in FP instruction formats and FP register classes.
- Calling conventions improved to support mips 32-bit EABI.
- Added Asm Printer support for fp cond codes.
- Added support for sret copy to a return register.
- EABI support added into LowerCALL and FORMAL_ARGS.
- MipsFunctionInfo now keeps a virtual register per function to track the
  sret on function entry until function ret.
- MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...),
  FP cond codes mapping and initial FP Branch Analysis.
- Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond,
  FPCmp
- MipsTargetLowering : handling different FP classes, Allegrex support, sret
  return copy, no homing location within EABI, non 32-bit stack objects
  arguments, and asm constraint for float.

llvm-svn: 53146

- Remove calls to copyKillDeadInfo which is an N^2 function. Instead, propagate kill / dead markers as new instructions are constructed in foldMemoryOperand, convertToThressAddress, etc.
- Also remove LiveVariables::instructionChanged, etc. Replace all calls with cheaper calls which update VarInfo kill list.

llvm-svn: 53097

the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.

Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.

This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.

llvm-svn: 52943

purpose, and give it a custom SDNode subclass so that it doesn't
need to have line number, column number, filename string, and
directory string, all existing as individual SDNodes to be the
operands.

This was the only user of ISD::STRING, StringSDNode, etc., so
remove those and some associated code.

This makes stop-points considerably easier to read in
-view-legalize-dags output, and reduces overhead (creating new
nodes and copying std::strings into them) on code containing
debugging information.

llvm-svn: 52924

llvm-svn: 52923

it impossible to create a MERGE_VALUES node with
only one result: sometimes it is useful to be able
to create a node with only one result out of one of
the results of a node with more than one result, for
example because the new node will eventually be used
to replace a one-result node using ReplaceAllUsesWith,
cf X86TargetLowering::ExpandFP_TO_SINT.  On the other
hand, most users of MERGE_VALUES don't need this and
for them the optimization was valuable.  So add a new
utility method getMergeValues for creating MERGE_VALUES
nodes which by default performs the optimization.
Change almost everywhere to use getMergeValues (and
tidy some stuff up at the same time).

llvm-svn: 52893

llvm-svn: 52478

llvm-svn: 52086

llvm-svn: 52079

and better control the abstraction.  Rename the type
to MVT.  To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits().  Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).

llvm-svn: 52044

MUL is not anymore directly matched because its a pseudoinstruction.
LogicI class fixed to zero-extend immediates. 

llvm-svn: 52036

Added special isel for ADDE,SUBE and new patterns to match SUBC,ADDC

llvm-svn: 52031

Added support for mips little endian arch => mipsel

llvm-svn: 51923

llvm-svn: 51833

are represented as "weak", but there are subtle differences
in some cases on Darwin, so we need both.  The intent
is that "common" will behave identically to "weak" unless
somebody changes their target to do something else.
No functional change as yet.

llvm-svn: 51118

This eliminates the need for several awkward casts, including
the last dynamic_cast under lib/Target.

llvm-svn: 51091

several things that were neither in an anonymous namespace nor static
but not intended to be global.

llvm-svn: 51017

on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.

Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.

This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.

Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.

This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.

llvm-svn: 49572

llvm-svn: 48995

patch by David Chisnall.

llvm-svn: 48963

llvm-svn: 48801

llvm-svn: 48448

Replace all target specific implicit def instructions with a target independent one: TargetInstrInfo::IMPLICIT_DEF.

llvm-svn: 48380

that merely add passes. This allows them to be used with either
FunctionPassManager or PassManager, or even with a custom new
kind of pass manager.

llvm-svn: 48256

llvm-svn: 48169

return ValueType can depend its operands' ValueType.

This is a cosmetic change, no functionality impacted.

llvm-svn: 48145

Implement x86 support for @llvm.prefetch. It corresponds to prefetcht{0|1|2} and prefetchnta instructions.

llvm-svn: 48042

llvm-svn: 47703

llvm-svn: 47663

would have been a Godsend here!

llvm-svn: 47625

I cannot find a libgcc function for this builtin.  Therefor expanding it to a noop (which is how it use to be treated).  If someone who knows the x86 backend better than me could tell me how to get a lock prefix on an instruction, that would be nice to complete x86 support.

llvm-svn: 47213

llvm-svn: 46930