llvm-svn: 19453

llvm-svn: 19452

int -> FP casting code.  Note that we don't have to set it for FP operations
that take FP values as operands: whatever produces the FP value will set the
flag.

llvm-svn: 19451

inverted the sense of the comparison.

llvm-svn: 19450

evaluate the LHS or the RHS of an operation first.  This causes good things
to happen.  For example, instead of compiling a loop to this:

.LBBstrength_result7_1: # loopentry
        movl 16(%esp), %edi
        movl (%edi), %edi             ;;; LOAD
        movl (%ecx), %ebx
        movl $2, (%eax,%ebx,4)
        movl (%edx), %ebx
        movl %esi, %ebp
        addl $21, %ebp
        addl $42, %esi
        cmpl $0, %edi                 ;;; USE
        cmovne %esi, %ebp
        cmpl %ebp, %ebx
        movl %ebp, %esi
        jg .LBBstrength_result7_1

We now compile it to this:

.LBBstrength_result7_1: # loopentry
        movl %edi, %ebx
        addl $42, %ebx
        addl $21, %edi
        movl (%ecx), %ebp              ;; LOAD
        cmpl $0, %ebp                  ;; USE
        cmovne %ebx, %edi
        movl (%edx), %ebx
        movl $2, (%eax,%ebx,4)
        movl (%esi), %ebx
        cmpl %edi, %ebx
        jg .LBBstrength_result7_1

Which reduces register pressure enough (in this case) to avoid spilling in the
loop.

As another example, consider the CodeGen/X86/regpressure.ll testcase.  We
used to generate this code for both cases:

regpressure1:
        subl $32, %esp
        movl %esi, 12(%esp)
        movl %edi, 8(%esp)
        movl %ebx, 4(%esp)
        movl %ebp, (%esp)
        movl 36(%esp), %ecx
        movl (%ecx), %eax
        movl 4(%ecx), %edx
        movl %edx, 24(%esp)
        movl 8(%ecx), %edx
        movl %edx, 16(%esp)
        movl 12(%ecx), %edx
        movl 16(%ecx), %esi
        movl 20(%ecx), %edi
        movl 24(%ecx), %ebx
        movl %ebx, 28(%esp)
        movl 28(%ecx), %ebx
        movl 32(%ecx), %ebp
        movl %ebp, 20(%esp)
        movl 36(%ecx), %ecx
        imull 24(%esp), %eax
        imull 16(%esp), %eax
        imull %edx, %eax
        imull %esi, %eax
        imull %edi, %eax
        imull 28(%esp), %eax
        imull %ebx, %eax
        imull 20(%esp), %eax
        imull %ecx, %eax
        movl (%esp), %ebp
        movl 4(%esp), %ebx
        movl 8(%esp), %edi
        movl 12(%esp), %esi
        addl $32, %esp
        ret

This code is basically trying to do all of the loads first, then execute all
of the multiplies.  Because we run out of registers, lots of spill code happens.
We now generate this code for both cases:

regpressure1:
        movl 4(%esp), %ecx
        movl (%ecx), %eax
        movl 4(%ecx), %edx
        imull %edx, %eax
        movl 8(%ecx), %edx
        imull %edx, %eax
        movl 12(%ecx), %edx
        imull %edx, %eax
        movl 16(%ecx), %edx
        imull %edx, %eax
        movl 20(%ecx), %edx
        imull %edx, %eax
        movl 24(%ecx), %edx
        imull %edx, %eax
        movl 28(%ecx), %edx
        imull %edx, %eax
        movl 32(%ecx), %edx
        imull %edx, %eax
        movl 36(%ecx), %ecx
        imull %ecx, %eax
        ret

which is much nicer (when we fold loads into the muls it will be even better).
The old instruction selector used to produce the good code for regpressure1
but not for regpressure2, as it depended on the order of operations in the
LLVM code.

llvm-svn: 19449

functions together at the start of the basic block, causing massive spillage.
The old isel codegened the loads wherever they happened to land, so it
generated good code for the first case, but bad code for the second.

We really want the pattern isel to generate (the same) good code for both.

llvm-svn: 19448

llvm-svn: 19447

llvm-svn: 19446

llvm-svn: 19445

llvm-svn: 19444

llvm-svn: 19443

llvm-svn: 19442

graph with no labels! :)

llvm-svn: 19441

llvm-svn: 19440

llvm-svn: 19439

llvm-svn: 19438

llvm-svn: 19437

llvm-svn: 19436

llvm-svn: 19435

leaked to the system.  Now they are destroyed with the JITMemoryManager is
destroyed.

llvm-svn: 19434

llvm-svn: 19432

  1. Rename createLoaderPass to CreateProfileLoaderPass
  2. Opt shouldn't use the pass registered in CodeGen.

llvm-svn: 19431

int test2(int * P, int* Q, int A, int B) {
        return P+A == P;
}

into:

test2:
        movl 4(%esp), %eax
        movl 12(%esp), %eax
        shll $2, %eax
        cmpl $0, %eax
        sete %al
        movzbl %al, %eax
        ret

instead of:

test2:
        movl 4(%esp), %eax
        movl 12(%esp), %ecx
        leal (%eax,%ecx,4), %ecx
        cmpl %eax, %ecx
        sete %al
        movzbl %al, %eax
        ret

ICC is producing worse code:

test2:
        movl      4(%esp), %eax                                 #8.5
        movl      12(%esp), %edx                                #8.5
        lea       (%edx,%edx), %ecx                             #9.9
        addl      %ecx, %ecx                                    #9.9
        addl      %eax, %ecx                                    #9.9
        cmpl      %eax, %ecx                                    #9.16
        movl      $0, %eax                                      #9.16
        sete      %al                                           #9.16
        ret                                                     #9.16

as is GCC (looks like our old code):

test2:
        movl    4(%esp), %edx
        movl    12(%esp), %eax
        leal    (%edx,%eax,4), %ecx
        cmpl    %edx, %ecx
        sete    %al
        movzbl  %al, %eax
        ret

llvm-svn: 19430

llvm-svn: 19429

llvm-svn: 19428

.LBB_Z5test0PdS__3:     # no_exit.1
        fldl data(,%eax,8)
        fldl 24(%esp)
        faddp %st(1)
        fstl 24(%esp)
        incl %eax
        movl $16000, %ecx
        sarl $3, %ecx
        cmpl %eax, %ecx
        fstpl 16(%esp)
        #FP_REG_KILL
        jg .LBB_Z5test0PdS__3   # no_exit.1

into:

.LBB_Z5test0PdS__3:     # no_exit.1
        fldl data(,%eax,8)
        fldl 24(%esp)
        faddp %st(1)
        fstl 24(%esp)
        incl %eax
        cmpl $2000, %eax
        fstpl 16(%esp)
        #FP_REG_KILL
        jl .LBB_Z5test0PdS__3   # no_exit.1

llvm-svn: 19427

gdb debugger doesn't get confused on which file it is reading (the one in
lib/System or the one in lib/System/{Win32,Unix})

llvm-svn: 19426

codegen this loop in stepanov:

no_exit.i:              ; preds = %entry, %no_exit.i, %then.i, %_Z5checkd.exit
        %i.0.0 = phi int [ 0, %entry ], [ %i.0.0, %no_exit.i ], [ %inc.0, %_Z5checkd.exit ], [ %inc.012, %then.i ]              ; <int> [#uses=3]
        %indvar = phi uint [ %indvar.next, %no_exit.i ], [ 0, %entry ], [ 0, %then.i ], [ 0, %_Z5checkd.exit ]          ; <uint> [#uses=3]
        %result_addr.i.0 = phi double [ %tmp.4.i.i, %no_exit.i ], [ 0.000000e+00, %entry ], [ 0.000000e+00, %then.i ], [ 0.000000e+00, %_Z5checkd.exit ]          ; <double> [#uses=1]
        %first_addr.0.i.2.rec = cast uint %indvar to int                ; <int> [#uses=1]
        %first_addr.0.i.2 = getelementptr [2000 x double]* %data, int 0, uint %indvar           ; <double*> [#uses=1]
        %inc.i.rec = add int %first_addr.0.i.2.rec, 1           ; <int> [#uses=1]
        %inc.i = getelementptr [2000 x double]* %data, int 0, int %inc.i.rec            ; <double*> [#uses=1]
        %tmp.3.i.i = load double* %first_addr.0.i.2             ; <double> [#uses=1]
        %tmp.4.i.i = add double %result_addr.i.0, %tmp.3.i.i            ; <double> [#uses=2]
        %tmp.2.i = seteq double* %inc.i, getelementptr ([2000 x double]* %data, int 0, int 2000)                ; <bool> [#uses=1]
        %indvar.next = add uint %indvar, 1              ; <uint> [#uses=1]
        br bool %tmp.2.i, label %_Z10accumulateIPddET0_T_S2_S1_.exit, label %no_exit.i

To this:

.LBB_Z4testIPddEvT_S1_T0__1:    # no_exit.i
        fldl data(,%eax,8)
        fldl 16(%esp)
        faddp %st(1)
        fstpl 16(%esp)
        incl %eax
        movl %eax, %ecx
        shll $3, %ecx
        cmpl $16000, %ecx
        #FP_REG_KILL
        jne .LBB_Z4testIPddEvT_S1_T0__1 # no_exit.i

instead of this:

.LBB_Z4testIPddEvT_S1_T0__1:    # no_exit.i
        fldl data(,%eax,8)
        fldl 16(%esp)
        faddp %st(1)
        fstpl 16(%esp)
        incl %eax
        leal data(,%eax,8), %ecx
        leal data+16000, %edx
        cmpl %edx, %ecx
        #FP_REG_KILL
        jne .LBB_Z4testIPddEvT_S1_T0__1 # no_exit.i

llvm-svn: 19425

llvm-svn: 19424

llvm-svn: 19423

llvm-svn: 19422

llvm-svn: 19421

of an ADDri (due to current restrictions on MachineOperand :( ).  This allows
us to generate:

        leal Data+16000, %edx

instead of:

        movl $Data, %edx
        addl $16000, %edx

llvm-svn: 19420

loops in stepanov to this:

.LBB_Z5test0PdS__2:     # no_exit.1
        fldl data(,%eax,8)
        fldl 24(%esp)
        faddp %st(1)
        fstl 24(%esp)
        incl %eax
        cmpl $2000, %eax
        fstpl 16(%esp)
        #FP_REG_KILL
        jl .LBB_Z5test0PdS__2

instead of this:

.LBB_Z5test0PdS__2:     # no_exit.1
        fldl data(,%eax,8)
        fldl 24(%esp)
        faddp %st(1)
        fstl 24(%esp)
        incl %eax
        movl $data, %ecx
        movl %ecx, %edx
        addl $16000, %edx
        subl %ecx, %edx
        movl %edx, %ecx
        sarl $2, %ecx
        shrl $29, %ecx
        addl %ecx, %edx
        sarl $3, %edx
        cmpl %edx, %eax
        fstpl 16(%esp)
        #FP_REG_KILL
        jl .LBB_Z5test0PdS__2

The old instruction selector produced:

.LBB_Z5test0PdS__2:     # no_exit.1
        fldl 24(%esp)
        faddl data(,%eax,8)
        fstl 24(%esp)
        movl %eax, %ecx
        incl %ecx
        incl %eax
        leal data+16000, %edx
        movl $data, %edi
        subl %edi, %edx
        movl %edx, %edi
        sarl $2, %edi
        shrl $29, %edi
        addl %edi, %edx
        sarl $3, %edx
        cmpl %edx, %ecx
        fstpl 16(%esp)
        #FP_REG_KILL
        jl .LBB_Z5test0PdS__2   # no_exit.1

Which is even worse!

llvm-svn: 19419

llvm-svn: 19418

values), and eliminate some switch statements.

llvm-svn: 19417

std::__pad<wchar_t, std::char_traits<wchar_t> >::_S_pad(std::ios_base&, wchar_t, wchar_t*, wchar_t const*, int, int, bool)

from libstdc++

llvm-svn: 19416

llvm-svn: 19415

Also, fix zero_extend from bool to i8, which fixes Shootout/objinst.

llvm-svn: 19414

llvm-svn: 19412