This fixes LSR crashes on 301.apsi, 191.fma3d, and 189.lucas

llvm-svn: 22673

the PHI node, this ugly code can vanish.

llvm-svn: 22672

llvm-svn: 22667

BasicBlock's removePredecessor routine.  This requires shuffling around
the definition and implementation of hasContantValue from Utils.h,cpp into
Instructions.h,cpp

llvm-svn: 22664

that the symbolic evaluator is not always able to use subtraction to remove
expressions.  This makes the code faster, and fixes the last crash on 178.galgel.
Finally, add a statistic to see how many phi nodes are inserted.

On 178.galgel, we get the follow stats:

2562 loop-reduce  - Number of PHIs inserted
3927 loop-reduce  - Number of GEPs strength reduced

llvm-svn: 22662

  method.
* Fix a crash on 178.galgel, where we would insert expressions before PHI
  nodes instead of into the PHI node predecessor blocks.

llvm-svn: 22657

llvm-svn: 22653

  for (i = 0; i < N; ++i)
    A[i][foo()] = 0;

here we still want to strength reduce the A[i] part, even though foo() is
l-v.

This also simplifies some of the 'CanReduce' logic.

This implements Transforms/LoopStrengthReduce/ops_after_indvar.ll

llvm-svn: 22652

llvm-svn: 22650

  1. We only analyze instructions once, guaranteed
  2. AnalyzeGetElementPtrUsers has been ripped apart and replaced with
     something much simpler.

The next step is to handle expressions that are not all indvar+loop-invariant
values (e.g. handling indvar+loopvariant).

llvm-svn: 22649

llvm-svn: 22643

llvm-svn: 22641

sure to handle the use, just don't recurse into it.

This permits us to generate this code for a simple nested loop case:

.LBB_foo_0:     ; entry
        stwu r1, -48(r1)
        stw r29, 44(r1)
        stw r30, 40(r1)
        mflr r11
        stw r11, 56(r1)
        lis r2, ha16(L_A$non_lazy_ptr)
        lwz r30, lo16(L_A$non_lazy_ptr)(r2)
        li r29, 1
.LBB_foo_1:     ; no_exit.0
        bl L_bar$stub
        li r2, 1
        or r3, r30, r30
.LBB_foo_2:     ; no_exit.1
        lfd f0, 8(r3)
        stfd f0, 0(r3)
        addi r4, r2, 1
        addi r3, r3, 8
        cmpwi cr0, r2, 100
        or r2, r4, r4
        bne .LBB_foo_2  ; no_exit.1
.LBB_foo_3:     ; loopexit.1
        addi r30, r30, 800
        addi r2, r29, 1
        cmpwi cr0, r29, 100
        or r29, r2, r2
        bne .LBB_foo_1  ; no_exit.0
.LBB_foo_4:     ; return
        lwz r11, 56(r1)
        mtlr r11
        lwz r30, 40(r1)
        lwz r29, 44(r1)
        lwz r1, 0(r1)
        blr

instead of this:

_foo:
.LBB_foo_0:     ; entry
        stwu r1, -48(r1)
        stw r28, 44(r1)                   ;; uses an extra register.
        stw r29, 40(r1)
        stw r30, 36(r1)
        mflr r11
        stw r11, 56(r1)
        li r30, 1
        li r29, 0
        or r28, r29, r29
.LBB_foo_1:     ; no_exit.0
        bl L_bar$stub
        mulli r2, r28, 800           ;; unstrength-reduced multiply
        lis r3, ha16(L_A$non_lazy_ptr)   ;; loop invariant address computation
        lwz r3, lo16(L_A$non_lazy_ptr)(r3)
        add r2, r2, r3
        mulli r4, r29, 800           ;; unstrength-reduced multiply
        addi r3, r3, 8
        add r3, r4, r3
        li r4, 1
.LBB_foo_2:     ; no_exit.1
        lfd f0, 0(r3)
        stfd f0, 0(r2)
        addi r5, r4, 1
        addi r2, r2, 8                 ;; multiple stride 8 IV's
        addi r3, r3, 8
        cmpwi cr0, r4, 100
        or r4, r5, r5
        bne .LBB_foo_2  ; no_exit.1
.LBB_foo_3:     ; loopexit.1
        addi r28, r28, 1               ;;; Many IV's with stride 1
        addi r29, r29, 1
        addi r2, r30, 1
        cmpwi cr0, r30, 100
        or r30, r2, r2
        bne .LBB_foo_1  ; no_exit.0
.LBB_foo_4:     ; return
        lwz r11, 56(r1)
        mtlr r11
        lwz r30, 36(r1)
        lwz r29, 40(r1)
        lwz r28, 44(r1)
        lwz r1, 0(r1)
        blr

llvm-svn: 22640

pushed down by SCEV.

In a nested loop case, this allows us to emit this:

        lis r3, ha16(L_A$non_lazy_ptr)
        lwz r3, lo16(L_A$non_lazy_ptr)(r3)
        add r2, r2, r3
        li r3, 1
.LBB_foo_2:     ; no_exit.1
        lfd f0, 8(r2)        ;; Uses offset of 8 instead of 0
        stfd f0, 0(r2)
        addi r4, r3, 1
        addi r2, r2, 8
        cmpwi cr0, r3, 100
        or r3, r4, r4
        bne .LBB_foo_2  ; no_exit.1

instead of this:

        lis r3, ha16(L_A$non_lazy_ptr)
        lwz r3, lo16(L_A$non_lazy_ptr)(r3)
        add r2, r2, r3
        addi r3, r3, 8
        li r4, 1
.LBB_foo_2:     ; no_exit.1
        lfd f0, 0(r3)
        stfd f0, 0(r2)
        addi r5, r4, 1
        addi r2, r2, 8
        addi r3, r3, 8
        cmpwi cr0, r4, 100
        or r4, r5, r5
        bne .LBB_foo_2  ; no_exit.1

llvm-svn: 22639

llvm-svn: 22638

Only emit one PHI node for IV uses with identical bases and strides (after
moving foldable immediates to the load/store instruction).

This implements LoopStrengthReduce/dont_insert_redundant_ops.ll, allowing
us to generate this PPC code for test1:

        or r30, r3, r3
.LBB_test1_1:   ; Loop
        li r2, 0
        stw r2, 0(r30)
        stw r2, 4(r30)
        bl L_pred$stub
        addi r30, r30, 8
        cmplwi cr0, r3, 0
        bne .LBB_test1_1        ; Loop

instead of this code:

        or r30, r3, r3
        or r29, r3, r3
.LBB_test1_1:   ; Loop
        li r2, 0
        stw r2, 0(r29)
        stw r2, 4(r30)
        bl L_pred$stub
        addi r30, r30, 8        ;; Two iv's with step of 8
        addi r29, r29, 8
        cmplwi cr0, r3, 0
        bne .LBB_test1_1        ; Loop

llvm-svn: 22635

unify some parallel vectors and get field names more descriptive than
"first" and "second".  This isn't lisp afterall :)

llvm-svn: 22633

map from instruction* to SCEVHandles.  When we delete instructions, we have
to tell it about it.  We would run into nasty cases where new instructions
were reallocated at old instruction addresses and get the old map values.
Bad bad bad :(

llvm-svn: 22632

Transforms/LowerInvoke/2005-08-03-InvokeWithPHIUse.ll

llvm-svn: 22628

fixes PR612 and Transforms/LowerInvoke/2005-08-03-InvokeWithPHI.ll

llvm-svn: 22626

Patch contributed by Jim Laskey!

llvm-svn: 22592

llvm-svn: 22586

llvm-svn: 22581

llvm-svn: 22580

Make LSR ignore GEP's that have loop variant base values, as we currently
cannot codegen them

llvm-svn: 22576

llvm-svn: 22575

llvm-svn: 22565

llvm-svn: 22564

llvm-svn: 22560

target data to decide which loop induction variables to strength reduce
and how to do so.  This work is mostly by Chris Lattner, with tweaks by
me to get it working on some of MultiSource.

llvm-svn: 22558

other passes may use it.

llvm-svn: 22557

llvm-svn: 22523

explained in the comment.

This fixes UnitTests/2003-09-18-BitFieldTest on darwin

llvm-svn: 22483

as a signed compare.  This patch may fix PR597, but is correct in any case.

llvm-svn: 22465

Because the instcombine has to scan the entire function when it starts up
to begin with, we might as well do it in DFO so we can nuke unreachable code.

This fixes: Transforms/InstCombine/2005-07-07-DeadPHILoop.ll

llvm-svn: 22348

llvm-svn: 22265

llvm-svn: 22254

GCC 4.0.0 compiler (sometimes incorrectly) warns about under release build.

llvm-svn: 22249

It is actually always true.  This fixes PR586 and
Transforms/InstCombine/2005-06-16-SetCCOrSetCCMiscompile.ll

llvm-svn: 22236

Transforms/InstCombine/2005-06-16-RangeCrash.ll

llvm-svn: 22234