it in with the SSSE3 instructions.

Steward! Could you place this chair by the aft sun deck? I'm trying to get away
from the Astors. They are such boors!

llvm-svn: 115552

the immediate field of pshufw is actually an 8-bit field, not a 8-bit field that is sign extended.  This fixes PR8288

llvm-svn: 115473

the right file.  The assembler supports all the 3dnow instructions now,
but not the "3dnowa" ones.

llvm-svn: 115468

llvm-svn: 115429

backing int_x86_ssse3_pshuf_w got removed.  This caused PR8280.

llvm-svn: 115422

The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.

Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics. 

MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces.  Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.

The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.

llvm-svn: 115243

llvm-svn: 113501

uses MMX, even if it also uses other things) from InstrSSE
into InstrMMX.  No (intended) functional change.

llvm-svn: 113462

llvm-svn: 113420

llvm-svn: 113406

Omission of memory form of PI2PD is intentional; this
does not use an MMX register and does not put the chip
into MMX mode (PI2PS, oddly enough, does).
Operands of PI2PS follow the gcc builtin, not Intel.

llvm-svn: 113388

Enable palignr intrinsic.
These may need adjustment for a new VT in due course.

llvm-svn: 113233

this fixes rdar://8192860.  Unfortunately it can only be triggered
with llc because llvm-mc matches another (correctly encoded) version
of this, so no testcase.

llvm-svn: 108454

llvm-svn: 107610

llvm-svn: 104552

have a pattern and it had an invalid encoding.

llvm-svn: 104244

mm to mm/m64 and the Move quadword from xmm2/mem64 to xmm1 had the incorrect
encodings.

llvm-svn: 102952

llvm-svn: 102199

llvm-svn: 99748

llvm-svn: 98531

pattern which is broken (source and address swapped).

llvm-svn: 97958

llvm-svn: 97348

then use it as an MMX register (!?).

llvm-svn: 96901

don't alis it in the MMX .td file with a different width,
split into two X86ISD opcodes.  This fixes an x86 testcase.

llvm-svn: 96859

TableGen fragment refactoring.

Move some utility TableGen defs, classes, etc. into a common file so
they may be used my multiple pattern files.  We will use this for
the AVX specification to help with the transition from the current
SSE specification.

llvm-svn: 95727

llvm-svn: 95435

the alignment allows.  Fixed a bug where we didn't use a
vector load/store for PR5626.

llvm-svn: 94338

X86 instruction tables.

Also (while I was at it) cleaned up the X86 tables, removing tabs and
80-line violations.

This patch was reviewed by Chris Lattner, but please let me know if
there are any problems.

* X86*.td
	Removed tabs and fixed 80-line violations

* X86Instr64bit.td
	(IRET, POPCNT, BT_, LSL, SWPGS, PUSH_S, POP_S, L_S, SMSW)
		Added
	(CALL, CMOV) Added qualifiers
	(JMP) Added PC-relative jump instruction
	(POPFQ/PUSHFQ) Added qualifiers; renamed PUSHFQ to indicate
		that it is 64-bit only (ambiguous since it has no
		REX prefix)
	(MOV) Added rr form going the other way, which is encoded
		differently
	(MOV) Changed immediates to offsets, which is more correct;
		also fixed MOV64o64a to have to a 64-bit offset
	(MOV) Fixed qualifiers
	(MOV) Added debug-register and condition-register moves
	(MOVZX) Added more forms
	(ADC, SUB, SBB, AND, OR, XOR) Added reverse forms, which
		(as with MOV) are encoded differently
	(ROL) Made REX.W required
	(BT) Uncommented mr form for disassembly only
	(CVT__2__) Added several missing non-intrinsic forms
	(LXADD, XCHG) Reordered operands to make more sense for
		MRMSrcMem
	(XCHG) Added register-to-register forms
	(XADD, CMPXCHG, XCHG) Added non-locked forms
* X86InstrSSE.td
	(CVTSS2SI, COMISS, CVTTPS2DQ, CVTPS2PD, CVTPD2PS, MOVQ)
		Added
* X86InstrFPStack.td
	(COM_FST0, COMP_FST0, COM_FI, COM_FIP, FFREE, FNCLEX, FNOP,
	 FXAM, FLDL2T, FLDL2E, FLDPI, FLDLG2, FLDLN2, F2XM1, FYL2X,
	 FPTAN, FPATAN, FXTRACT, FPREM1, FDECSTP, FINCSTP, FPREM,
	 FYL2XP1, FSINCOS, FRNDINT, FSCALE, FCOMPP, FXSAVE,
	 FXRSTOR)
		Added
	(FCOM, FCOMP) Added qualifiers
	(FSTENV, FSAVE, FSTSW) Fixed opcode names
	(FNSTSW) Added implicit register operand
* X86InstrInfo.td
	(opaque512mem) Added for FXSAVE/FXRSTOR
	(offset8, offset16, offset32, offset64) Added for MOV
	(NOOPW, IRET, POPCNT, IN, BTC, BTR, BTS, LSL, INVLPG, STR,
	 LTR, PUSHFS, PUSHGS, POPFS, POPGS, LDS, LSS, LES, LFS,
	 LGS, VERR, VERW, SGDT, SIDT, SLDT, LGDT, LIDT, LLDT,
	 LODSD, OUTSB, OUTSW, OUTSD, HLT, RSM, FNINIT, CLC, STC,
	 CLI, STI, CLD, STD, CMC, CLTS, XLAT, WRMSR, RDMSR, RDPMC,
	 SMSW, LMSW, CPUID, INVD, WBINVD, INVEPT, INVVPID, VMCALL,
	 VMCLEAR, VMLAUNCH, VMRESUME, VMPTRLD, VMPTRST, VMREAD,
	 VMWRITE, VMXOFF, VMXON) Added
	(NOOPL, POPF, POPFD, PUSHF, PUSHFD) Added qualifier
	(JO, JNO, JB, JAE, JE, JNE, JBE, JA, JS, JNS, JP, JNP, JL,
	 JGE, JLE, JG, JCXZ) Added 32-bit forms
	(MOV) Changed some immediate forms to offset forms
	(MOV) Added reversed reg-reg forms, which are encoded
		differently
	(MOV) Added debug-register and condition-register moves
	(CMOV) Added qualifiers
	(AND, OR, XOR, ADC, SUB, SBB) Added reverse forms, like MOV
	(BT) Uncommented memory-register forms for disassembler
	(MOVSX, MOVZX) Added forms
	(XCHG, LXADD) Made operand order make sense for MRMSrcMem
	(XCHG) Added register-register forms
	(XADD, CMPXCHG) Added unlocked forms
* X86InstrMMX.td
	(MMX_MOVD, MMV_MOVQ) Added forms
* X86InstrInfo.cpp: Changed PUSHFQ to PUSHFQ64 to reflect table
	change

* X86RegisterInfo.td: Added debug and condition register sets
* x86-64-pic-3.ll: Fixed testcase to reflect call qualifier
* peep-test-3.ll: Fixed testcase to reflect test qualifier
* cmov.ll: Fixed testcase to reflect cmov qualifier
* loop-blocks.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-11.ll: Fixed testcase to reflect call qualifier
* 2009-11-04-SubregCoalescingBug.ll: Fixed testcase to reflect call
  qualifier
* x86-64-pic-2.ll: Fixed testcase to reflect call qualifier
* live-out-reg-info.ll: Fixed testcase to reflect test qualifier
* tail-opts.ll: Fixed testcase to reflect call qualifiers
* x86-64-pic-10.ll: Fixed testcase to reflect call qualifier
* bss-pagealigned.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-1.ll: Fixed testcase to reflect call qualifier
* widen_load-1.ll: Fixed testcase to reflect call qualifier

llvm-svn: 91638

bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.

llvm-svn: 85517

 - Used to mark fake instructions which don't correspond to an actual machine
   instruction (or are duplicates of a real instruction). This is to be used for
   "special cases" in the .td files, which should be ignored by things like the
   assembler and disassembler. We still need a good solution to handle pervasive
   duplication, like with the Int_ instructions.

 - Set the bit on fake "mov 0" style instructions, which allows turning an
   assembler matcher warning into a hard error.

 - -2 FIXMEs.

llvm-svn: 78731

No functional change.

llvm-svn: 78608

llvm-svn: 77978

llvm-svn: 77956

llvm-svn: 77944

Fixes PR4669

llvm-svn: 77940

llvm-svn: 76713

llvm-svn: 75142

instructions, which implies that there is an explicit memory operand.  There is
(however) no explicit memory operand; although this is a store, the only memory
operand is implicit, indicated by DS:EDI.  This causes the table-generation code
for the disassembler to report an error."

Patch by Sean Callanan!

llvm-svn: 73989

nodes for vectors with an i16 element type.  Add an optimization for 
building a vector which is all zeros/undef except for the bottom 
element, where the bottom element is an i8 or i16.

llvm-svn: 72988

llvm-svn: 72985