copied by the copy constructor for ClangExpressionVariable.
This meant that a NULL m_register_info wouldn't be
copied, and instead the field was uninitialized, potentially
confusing the materializer.

llvm-svn: 120472

Moved the code in ClangUserExpression that set up & ran the thread plan with timeouts, and restarting with all threads into a utility function in Process.  This required a bunch of renaming. 

Added a ThreadPlanCallUserExpression that differs from ThreadPlanCallFunction in that it holds onto a shared pointer to its ClangUserExpression so that can't go away before the thread plan is done using it.

Fixed the stop message when you hit a breakpoint while running a user expression so it is more obvious what has happened.

llvm-svn: 120386

using special $-variables from expressions.

(lldb) expr $rip

These variables are available for reading and
writing.

llvm-svn: 120367

llvm-svn: 120322

When we resolve a forward declaration type, be sure to put it into the m_die_to_type map so we don't assert later when someone tries to resolve the type.

llvm-svn: 119910

llvm-svn: 119890

of failures in the AST importer.  Also ensured
that a variable will not be blindly added if
GetVariableValue() returns an error.

llvm-svn: 119889

llvm-svn: 119888

RegisterContext* - normally this is retrieved from the ExecutionContext's
StackFrame but when we need to evaluate an expression while creating
the stack frame list this can be a little tricky.

Add DW_OP_deref_size, needed for the _sigtramp FDE expression.

Add support for processing DWARF expressions in RegisterContextLLDB.

Update callers to DWARFExpression::Evaluate.

llvm-svn: 119885

to hang around and take a ton of CPU time. Caroline will fix this when she
gets back from vacation.

llvm-svn: 119877

declarations" fix.

llvm-svn: 119847

and end-of-file (often control-d).

llvm-svn: 119837

perform recursive type lookups, because these are not
required for full type fidelity.  We also make the
SelectorTable last for the full lifetime of the Clang
compiler; this was the source of many bugs.

llvm-svn: 119835

Change SBFrame::LookupVarInScope() to also work with "global" scope in addition
to "local" and "parameter" scope.

llvm-svn: 119811

llvm-svn: 119786

order and this was causing the target, process and thread trees to not be
available.

llvm-svn: 119784

that the result of an expression should be coerced to
a specific type.  Also made breakpoint conditions pass
in the bool type for this type.

The expression parser ignores this indication for now.

llvm-svn: 119779

conventions.

llvm-svn: 119771

changing it to use it. There was an extra parameter added to the static
accessor global user settings controllers that wasn't needed. A bool was being
used as a parameter to the accessor just so it could be used to clean up 
the global user settings controller which is now fixed by splitting up the
initialization into the "static void Class::Initialize()", access into the
"static UserSettingsControllerSP & Class::GetSettingsController()", and
cleanup into "static void Class::Terminate()".

Also added initialize and terminate calls to the logging code to avoid issues
when LLDB is shutting down. There were cases after the logging was switched
over to use shared pointers where we could crash if the global destructor
chain was being run and it causes the log to be destroyed and any any logging
occurred.

llvm-svn: 119757

externally-defined variables to match up with
the code in ClangASTSource that produces them.

llvm-svn: 119750

by being able to get the data count and data. Each thread stop reason
has one or more data words that can help describe the stop. To do this
I added:

    size_t
	SBThread::GetStopReasonDataCount();

	uint64_t
	SBThread::GetStopReasonDataAtIndex(uint32_t idx);

llvm-svn: 119720

to the DoHalt down in ProcessGDBRemote. I also moved the functionality that
was in ProcessGDBRemote::DoHalt up into Process::Halt so not every class has
to implement a tricky halt/resume on the internal state thread. The 
functionality is the same as it was before with two changes:
- when we eat the event we now just reuse the event we consume when the private
  state thread is paused and set the interrupted bool on the event if needed
- we also properly update the Process::m_public_state with the state of the
  event we consume.
  
Prior to this, if you issued a "process halt" it would eat the event, not 
update the process state, and then produce a new event with the interrupted
bit set and send it. Anyone listening to the event would get the stopped event
with a process that whose state was set to "running".

Fixed debugserver to not have to be spawned with the architecture of the
inferior process. This worked fine for launching processes, but when attaching
to processes by name or pid without a file in lldb, it would fail.

Now debugserver can support multiple architectures for a native debug session
on the current host. This currently means i386 and x86_64 are supported in
the same binary and a x86_64 debugserver can attach to a i386 executable.
This change involved a lot of changes to make sure we dynamically detect the
correct registers for the inferior process.

llvm-svn: 119680

llvm-svn: 119677

The thread plan destructors may call Thread virtual methods.  That means they have to get cleaned up in the derived class's destructor.  Make sure that happens.

llvm-svn: 119675

They are replaced with calls to the CoreFoundation function 
CFStringCreateWithBytes() by a portion of the IRForTarget pass.

llvm-svn: 119582

llvm-svn: 119581

llvm-svn: 119553

Add a ThreadPlanAssemblyTracer that takes just a thread (since that's how we call it from ThreadPlanBase...)

llvm-svn: 119549

with the Interrupted bit set.  Process::HandlePrivateEvent ignores Interrupted events.
DoHalt is changed to ensure that the stop even is processed, and an event with
the Interrupted event is posted.  Finally ClangFunction is rationalized to use this
facility so the that Halt is handled more deterministically.

llvm-svn: 119453

llvm-svn: 119396

ReadThread stuff into the main Process class (out of the Process Plugins).
This has the (intended) side effect of disabling the command line tool
from reading input/commands while the process is running (the input is
directed to the running process rather than to the command interpreter).

llvm-svn: 119329

we're using the stack pointer to define the CFA again.  Makes unwinds
while sitting at the 'ret' instruction work, assuming we have accurate
function address bounds.

llvm-svn: 119327

It currently isn't working, but it should be close. I will work on this more
when I figure out what I am not doing correctly.

llvm-svn: 119324

expression logging.

Added some properties to the "objc" test. The expression parser can currently
display properties that are backed by the default functions "expr myStr.string"
will work. But it won't currently work when the property is backed by a 
different function such as "expr myStr.date".

llvm-svn: 119103

Added recursive name lookup logging with depth which is commented out and is currently only enabled when we blow the stack.

llvm-svn: 119101

llvm-svn: 119100

can too. So now the lldb_private::Variable class has support for this.

Variables now have support for having a basename ("i"), and a mangled name 
("_ZN12_GLOBAL__N_11iE"), and a demangled name ("(anonymous namespace)::i").

Nowwhen searching for a variable by name, users might enter the fully qualified
name, or just the basename. So new test functions were added to the Variable 
and Mangled classes as:

	bool NameMatches (const ConstString &name);
	bool NameMatches (const RegularExpression &regex);

I also modified "ClangExpressionDeclMap::FindVariableInScope" to also search
for global variables that are not in the current file scope by first starting
with the current module, then moving on to all modules.

Fixed an issue in the DWARF parser that could cause a varaible to get parsed
more than once. Now, once we have parsed a VariableSP for a DIE, we cache
the result even if a variable wasn't made so we don't do any re-parsing. Some
DW_TAG_variable DIEs don't have locations, or are missing vital info that 
stops a debugger from being able to display anything for it, we parse a NULL
variable shared pointer for these DIEs so we don't keep trying to reparse it.

llvm-svn: 119085

types to their full definitions more than we needed to. This caused an assertion
in the DWARF parser to fire -- which is an indication that we are parsing too much.

llvm-svn: 119020

breakpoints on inlined functions by name. This involved fixing the DWARF parser
to correctly back up and parse the concrete function when we find inlined
functions by name, then grabbing any appropriate inlined blocks and returning
symbol contexts with the block filled in. After this was fixed, the breakpoint
by name resolver needed to correctly deal with symbol contexts that had the
inlined block filled in in the symbol contexts.

llvm-svn: 119017

a debug map with DWARF in the .o files due to the attemted shortcut that was
being taken where the global variables were being searched for by looking in
the symbol table. The problem with the symbols in the symbol table is we don't
break apart the symbol names for symbols when they are mangled into basename
and the fully mangled name since this would take a lot of CPU time to chop up
the mangled names and try and find the basenames. The DWARF info typically has
this broken up for us where the basename of the variable is in a the DW_AT_name
attribute, and the mangled name is in the DW_AT_MIPS_linkage_name attribute.
Now we correctly find globals by searching all OSO's for the information so we
can take advantage of this split information. 

llvm-svn: 119012