llvm-svn: 145897

Missing file from r145629.

llvm-svn: 145634

llvm-svn: 145420

And there was much rejoicing.

llvm-svn: 144480

RegAllocGreedy has been the default for six months now.

Deleting RegAllocLinearScan makes it possible to also delete
VirtRegRewriter and clean up the spiller code.

llvm-svn: 144475

block frequency analyses. This differs substantially from the existing
block-placement pass in LLVM:

1) It operates on the Machine-IR in the CodeGen layer. This exposes much
   more (and more precise) information and opportunities. Also, the
   results are more stable due to fewer transforms ocurring after the
   pass runs.
2) It uses the generalized probability and frequency analyses. These can
   model static heuristics, code annotation derived heuristics as well
   as eventual profile loading. By basing the optimization on the
   analysis interface it can work from any (or a combination) of these
   inputs.
3) It uses a more aggressive algorithm, both building chains from tho
   bottom up to maximize benefit, and using an SCC-based walk to layout
   chains of blocks in a profitable ordering without O(N^2) iterations
   which the old pass involves.

The pass is currently gated behind a flag, and not enabled by default
because it still needs to grow some important features. Most notably, it
needs to support loop aligning and careful layout of loop structures
much as done by hand currently in CodePlacementOpt. Once it supports
these, and has sufficient testing and quality tuning, it should replace
both of these passes.

Thanks to Nick Lewycky and Richard Smith for help authoring & debugging
this, and to Jakob, Andy, Eric, Jim, and probably a few others I'm
forgetting for reviewing and answering all my questions. Writing
a backend pass is *sooo* much better now than it used to be. =D

llvm-svn: 142641

I'll clean up the source in the next commit.

llvm-svn: 140663

I'll fix the file contents in the next commit.

This pass is currently expanding the COPY and SUBREG_TO_REG pseudos. I
am going to add a hook so targets can expand more pseudo-instructions
after register allocation.

Many targets have pseudo-instructions that assist the register
allocator.  They can be expanded after register allocation, before PEI
and PostRA scheduling.

llvm-svn: 140469

SplitKit will soon need two copies of these data structures, and the
algorithms will also be useful when LiveIntervalAnalysis becomes
independent of LiveVariables.

llvm-svn: 139572

llvm-svn: 137237

specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.

I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.

This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.

This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.

Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.

This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.

llvm-svn: 136433

MachineBlockFrequencyInfo.

llvm-svn: 135937

llvm-svn: 135352

llvm-svn: 133981

llvm-svn: 133897

BranchProbabilityInfo (expect setEdgeWeight which is not available here).
Branch Weights are kept in MachineBasicBlocks. To turn off this analysis
set -use-mbpi=false.

llvm-svn: 133184

register classes.

It provides information for each register class that cannot be
determined statically, like:

- The number of allocatable registers in a class after filtering out the
  reserved and invalid registers.

- The preferred allocation order with registers that overlap callee-saved
  registers last.

- The last callee-saved register that overlaps a given physical register.

This information usually doesn't change between functions, so it is
reused for compiling multiple functions when possible.  The many
possible combinations of reserved and callee saves registers makes it
unfeasible to compute this information statically in TableGen.

Use RegisterClassInfo to count available registers in various heuristics
in SimpleRegisterCoalescing, making the pass run 4% faster.

llvm-svn: 132450

When the greedy register allocator is splitting multiple global live ranges, it
tends to look at the same interference data many times. The InterferenceCache
class caches queries for unaltered LiveIntervalUnions.

llvm-svn: 128764

llvm-svn: 125968

llvm-svn: 123129

This pass precomputes CFG block frequency information that can be used by the
register allocator to find optimal spill code placement.

Given an interference pattern, placeSpills() will compute which basic blocks
should have the current variable enter or exit in a register, and which blocks
prefer the stack.

The algorithm is ready to consume block frequencies from profiling data, but for
now it gets by with the static estimates used for spill weights.

This is a work in progress and still not hooked up to RegAllocGreedy.

llvm-svn: 122938

The analysis will be needed by both the greedy register allocator and the
X86FloatingPoint pass. It only needs to be computed once when the CFG doesn't
change.

This pass is very fast, usually showing up as 0.0% wall time.

llvm-svn: 122832

A MachineLoopRange contains the intervals of slot indexes covered by the blocks
in a loop. This representation of the loop blocks is more efficient to compare
against interfering registers during register coalescing.

llvm-svn: 121917

registers for a given virtual register.

Reserved registers are filtered from the allocation order, and any valid hint is
returned as the first suggestion.

For target dependent hints, a number of arcane target hooks are invoked.

llvm-svn: 121497

both forward and backward scheduling. Rename it to
ScoreboardHazardRecognizer (Scoreboard is one word). Remove integer
division from the scoreboard's critical path.

llvm-svn: 121274

This new register allocator is initially identical to RegAllocBasic, but it will
receive all of the tricks that RegAllocBasic won't get.

RegAllocGreedy will eventually replace linear scan.

llvm-svn: 121234

function so that it can be shared with StrongPHIElimination.

llvm-svn: 120951

This analysis is going to run immediately after LiveIntervals. It will stay
alive during register allocation and keep track of user variables mentioned in
DBG_VALUE instructions.

When the register allocator is moving values between registers and the stack, it
is very hard to keep track of DBG_VALUE instructions. We usually get it wrong.
This analysis maintains a data structure that makes it easy to update DBG_VALUE
instructions.

llvm-svn: 120385

llvm-svn: 119716

llvm-svn: 119385

framework. It's purpose is not to improve register allocation per se,
but to make it easier to develop powerful live range splitting. I call
it the basic allocator because it is as simple as a global allocator
can be but provides the building blocks for sophisticated register
allocation with live range splitting. 

A minimal implementation is provided that trivially spills whenever it
runs out of registers. I'm checking in now to get high-level design
and style feedback. I've only done minimal testing. The next step is
implementing a "greedy" allocation algorithm that does some register
reassignment and makes better splitting decisions.

llvm-svn: 117174

splitting or spillling, and to help with rematerialization.

Use LiveRangeEdit in InlineSpiller and SplitKit. This will eventually make it
possible to share remat code between InlineSpiller and SplitKit.

llvm-svn: 116543

llvm-svn: 115949

llvm-svn: 114999

This reverts commit r113632

Conflicts:

	cmake/modules/AddLLVM.cmake

llvm-svn: 113819

llvm-svn: 113632

llvm-svn: 111063

experimental pass that allocates locals relative to one another before
register allocation and then assigns them to actual stack slots as a block
later in PEI. This will eventually allow targets with limited index offset
range to allocate additional base registers (not just FP and SP) to
more efficiently reference locals, as well as handle situations where
locals cannot be referenced via SP or FP at all (dynamic stack realignment
together with variable sized objects, for example). It's currently
incomplete and almost certainly buggy. Work in progress.

Disabled by default and gated via the -enable-local-stack-alloc command
line option.

rdar://8277890

llvm-svn: 111059

llvm-svn: 110654

llvm-svn: 110429