Previously, files added using INCLUDE directive weren't added
to reproduce archives. In this patch, I defined a function to
open a file and use that from Driver and LinkerScript.

llvm-svn: 291413

This is how we use TarWriter in LLD. Now LLD does not append
a file extension, so you need to pass `--reproduce foo.tar`
instead of `--reproduce foo`.

Differential Revision: https://reviews.llvm.org/D28103

llvm-svn: 291210

We managed new MemoryBuffers in different ways in LinkerScript.cpp and
Driver.cpp. With this patch, they are managed in the same way.

llvm-svn: 290411

The feature is documented as
-----------------------------
The format of the dynamic list is the same as the version node
without scope and node name.  See *note VERSION:: for more
information.
--------------------------------

And indeed qt uses a dynamic list with an 'extern "C++"' in it. With
this patch we support that

The change to gc-sections-shared makes us match bfd. Just because we
kept bar doesn't mean it has to be in the dynamic symbol table.

The changes to invalid-dynamic-list.test and reproduce.s are because
of the new parser.

The changes to version-script.s are the only case where we change
behavior with regards to bfd, but I would like to see a mix of
--version-script and --dynamic-list used in the wild before
complicating the code.

llvm-svn: 289082

We have a .cpp and a .h for parseDynamicList(). This patch
moves the function to DriverUtil.cpp.

llvm-svn: 287468

llvm-svn: 287456

This patch also changes its return type to simplify callers.

llvm-svn: 287455

The functions getBitcodeTargetTriple(), isBitcodeContainingObjCCategory(),
getBitcodeProducerString() and hasGlobalValueSummary() now return errors
via their return value rather than via the diagnostic handler.

To make this work, re-implement these functions using non-member functions
so that they can be used without the LLVMContext required by BitcodeReader.

Differential Revision: https://reviews.llvm.org/D26532

llvm-svn: 286623

Previously, we have a lot of BumpPtrAllocators, but all these
allocators virtually have the same lifetime because they are
not freed until the linker finishes its job. This patch aggregates
them into a single allocator.

Differential revision: https://reviews.llvm.org/D26042

llvm-svn: 285452

As the state of lld gets more complicated, shutting down gets more
expensive.

In a normal lld run we can just call _exit immediately after renaming
the temporary output file. We still want the ability to run a full
shutdown since that is useful for detecting memory leaks.

This patch adds a --full-shutdown flag and changes lit to use it.

llvm-svn: 285224

llvm-svn: 285164

This member is used only by LinkerDriver, so move it to LinkerDriver.

llvm-svn: 284696

llvm-svn: 284695

llvm-svn: 284694

llvm-svn: 284641

llvm-svn: 282668

Previously, all input files were owned by the symbol table.
Files were created at various places, such as the Driver, the lazy
symbols, or the bitcode compiler, and the ownership of new files
was transferred to the symbol table using std::unique_ptr.
All input files were then free'd when the symbol table is freed
which is on program exit.

I think we don't have to transfer ownership just to free all
instance at once on exit.

In this patch, all instances are automatically collected to a
vector and freed on exit. In this way, we no longer have to
use std::unique_ptr.

Differential Revision: https://reviews.llvm.org/D24493

llvm-svn: 281425

Implemented by building an ELF file in memory.

elf, default, and binary match gold behavior.

Differential Revision: https://reviews.llvm.org/D24060

llvm-svn: 281108

This flag is implemented similarly to --reproduce in the ELF linker.

This patch implements /linkrepro by moving the cpio writer and associated
utility functions to lldCore, and using that implementation in both linkers.

One COFF-specific detail is that we store the object file from which the
resource files were created in our reproducer, rather than the resource
files themselves. This allows the reproducer to be used on non-Windows
systems for example.

Differential Revision: https://reviews.llvm.org/D22418

llvm-svn: 276719

Differential Revision: http://reviews.llvm.org/D21008

llvm-svn: 271901

This code separates the code to create cpio archive from the driver.

llvm-svn: 269593

If you specify the option in the form of --build-id=0x<hexstring>,
that hexstring is set as a build ID. We observed that the feature
is actually in use in some builds, so we want this feature.

llvm-svn: 269495

We want --reproduce to

* not rewrite scripts and thin archives
* work with absolute paths

Given that, it pretty much has to create a full directory tree. On windows that
is problematic because of the very short maximum path limit. On most cases
users can still work around it with "--repro c:\r", but that is annoying and
not viable for automated testing.

We then need to produce some form of archive with the files. The first option
that comes to mind is .a files since we already have code for writing them.
There are a few problems with them

The format has a dedicated string table, so we cannot start writing it until
all members are known.
Regular implementations don't support creating directories. We could make
llvm-ar support that, but that is probably not a good idea.
The next natural option would be tar. The problem is that to support long path
names (which is how this started) it needs a "pax extended header" making this
an annoying format to write.

The next option I looked at seems a natural fit: cpio files.

They are available on pretty much every unix, support directories and long path
names and are really easy to write. The only slightly annoying part is a
terminator, but at least gnu cpio only prints a warning if it is missing, which
is handy for crashes. This patch still makes an effort to always create it.

llvm-svn: 268404

Previuosly, only files appeared on the command line were copied.

llvm-svn: 268171

The aim of this patch is to make it easy to re-run the command without
updating paths in the command line. Here is a use case.

Assume that Alice is having an issue with lld and is reporting the issue
to developer Bob. Alice's current directly is /home/alice/work and her
command line is "ld.lld -o foo foo.o ../bar.o". She adds "--reproduce repro"
to the command line and re-run. Then the following text will be produced as
response.txt (notice that the paths are rewritten so that they are
relative to /home/alice/work/repro.)

  -o home/alice/work/foo home/alice/work/foo.o home/alice/bar.o

The command also produces the following files by copying inputs.

  /home/alice/repro/home/alice/work/foo.o
  /home/alice/repro/home/alice/bar.o

Alice zips the directory and send it to Bob. Bob get an archive from Alice
and extract it to his home directory as /home/bob/repro. Now his directory
have the following files.

  /home/bob/repro/response.txt
  /home/bob/repro/home/alice/work/foo.o
  /home/bob/repro/home/alice/bar.o

Bob then re-run the command with these files by the following commands.

  cd /home/bob/repro
  ld.lld @response.txt

This command will run the linker with the same command line options and
the same input files as Alice's, so it is very likely that Bob will see
the same issue as Alice saw.

Differential Revision: http://reviews.llvm.org/D19737

llvm-svn: 268169

Using multiple context used to be a really big memory saving because we
could free memory from each file while the linker proceeded with the
symbol resolution. We are getting lazier about reading data from the
bitcode, so I was curious if this was still a good tradeoff.

One thing that is a bit annoying is that we still have to copy the
symbol names. The problem is that the names are stored in the Module and
get freed when we move the module bits during linking.

Long term I think the solution is to add a symbol table to the bitcode.
That way IRObject file will not need to use a Module or a Context and we
can drop it while still keeping a StringRef to the names.

This patch is still be an interesting medium term improvement.

When linking llvm-as without debug info this patch is a small speedup:

master: 29.861877513 seconds
patch: 29.814533787 seconds

With debug info the numbers are

master: 34.765181469 seconds
patch: 34.563351584 seconds

The peak memory usage when linking llvm-as with debug info was

master: 599.10MB
patch: 600.13MB
llvm-svn: 267921

llvm-svn: 267602

This patch only implements support for version scripts of the form:
  { [ global: symbol1; symbol2; [...]; symbolN; ] local: *; };
No wildcards are supported, other than for the local entry. Symbol versioning
is also not supported.

It works by introducing a new Symbol flag which tracks whether a symbol
appears in the global section of a version script.

This patch also simplifies the logic in SymbolBody::isPreemptible(), and
teaches it to handle the case where symbols with default visibility in DSOs
do not appear in the dynamic symbol table because of a version script.

Fixes PR27482.

Differential Revision: http://reviews.llvm.org/D19430

llvm-svn: 267208

llvm-svn: 266231

This patch implements the --dynamic-list option, which adds a list of
global symbol that either should not be bounded by default definition
when creating shared libraries, or add in dynamic symbol table in the
case of creating executables.

The patch modifies the ScriptParserBase class to use a list of Token
instead of StringRef, which contains information if the token is a
quoted or unquoted strings. It is used to use a faster search for
exact match symbol name.

The input file follow a similar format of linker script with some
simplifications (it does not have scope or node names). It leads
to a simplified parser define in DynamicList.{cpp,h}.

Different from ld/gold neither glob pattern nor mangled names
(extern 'C++') are currently supported.

llvm-svn: 266227

start-lib and end-lib are options to link object files in the same
semantics as archive files. If an object is in start-lib and end-lib,
the object is linked only when the file is needed to resolve
undefined symbols. That means, if an object is in start-lib and end-lib,
it behaves as if it were in an archive file.

In this patch, I introduced a new notion, LazyObjectFile. That is
analogous to Archive file type, but that works for a single object
file instead of for an archive file.

http://reviews.llvm.org/D18814

llvm-svn: 265710

Differential Revision: http://reviews.llvm.org/D18669

llvm-svn: 265073

Fixes pr26908. This patch is based on Filipe Cabecinhas'
patch (http://reviews.llvm.org/D18167)

http://reviews.llvm.org/D18169

llvm-svn: 263569

Now that DarwinLdDriver is the only derived class of Driver.
This patch merges them and actually removed the class because
they can now just be non-member functions. This change simplifies
a common header, Driver.h.

http://reviews.llvm.org/D17788

llvm-svn: 262502

llvm-svn: 262168

llvm-svn: 262167

llvm-svn: 262159

llvm-svn: 260598

http://reviews.llvm.org/D16668

llvm-svn: 259597

This reverts r259395 which reverted r259143.

llvm-svn: 259572