configure

esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dest_dir";;
*)
  case "$ac_dest_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dest_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dest_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  case $srcdir in
  [\\/$]* | ?:[\\/]* ) ac_rel_source=$srcdir/$ac_source ;;
      *) ac_rel_source=$ac_top_builddir$srcdir/$ac_source ;;
  esac

  # Try a symlink, then a hard link, then a copy.
  ln -s $ac_rel_source $ac_dest 2>/dev/null ||
    ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
    cp -p $srcdir/$ac_source $ac_dest ||
    { { echo "$as_me:$LINENO: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&2;}
   { (exit 1); exit 1; }; }
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF

#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_dest" : 'X\(//\)[^/]' \| \
	 X"$ac_dest" : 'X\(//\)$' \| \
	 X"$ac_dest" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
  case $ac_dest in
    Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile Makefile ;;
    Makefile.common ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile.common Makefile.common ;;
    examples/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/examples/Makefile examples/Makefile ;;
    lib/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Makefile lib/Makefile ;;
    runtime/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/runtime/Makefile runtime/Makefile ;;
    test/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile test/Makefile ;;
    test/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile.tests test/Makefile.tests ;;
    test/QMTest/llvm.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvm.py test/QMTest/llvm.py ;;
    test/QMTest/llvmdb.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvmdb.py test/QMTest/llvmdb.py ;;
    tools/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/Makefile tools/Makefile ;;
    utils/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/utils/Makefile utils/Makefile ;;
    projects/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/projects/Makefile projects/Makefile ;;
  esac
done
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF

{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save


# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || { (exit 1); exit 1; }
fi

#
# CONFIG_SUBDIRS section.
#
if test "$no_recursion" != yes; then

  # Remove --cache-file and --srcdir arguments so they do not pile up.
  ac_sub_configure_args=
  ac_prev=
  for ac_arg in $ac_configure_args; do
    if test -n "$ac_prev"; then
      ac_prev=
      continue
    fi
    case $ac_arg in
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
      ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
    | --c=*)
      ;;
    --config-cache | -C)
      ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
      ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
      ;;
    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
      ac_prev=prefix ;;
    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
      ;;
    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
    esac
  done

  # Always prepend --prefix to ensure using the same prefix
  # in subdir configurations.
  ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"

  ac_popdir=`pwd`
  for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue

    # Do not complain, so a configure script can configure whichever
    # parts of a large source tree are present.
    test -d $srcdir/$ac_dir || continue

    { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
echo "$as_me: configuring in $ac_dir" >&6;}
    { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

    ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


    cd $ac_dir

    # Check for guested configure; otherwise get Cygnus style configure.
    if test -f $ac_srcdir/configure.gnu; then
      ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
    elif test -f $ac_srcdir/configure; then
      ac_sub_configure="$SHELL '$ac_srcdir/configure'"
    elif test -f $ac_srcdir/configure.in; then
      ac_sub_configure=$ac_configure
    else
      { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
      ac_sub_configure=
    fi

    # The recursion is here.
    if test -n "$ac_sub_configure"; then
      # Make the cache file name correct relative to the subdirectory.
      case $cache_file in
      [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
      *) # Relative path.
	ac_sub_cache_file=$ac_top_builddir$cache_file ;;
      esac

      { echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
      # The eval makes quoting arguments work.
      eval $ac_sub_configure $ac_sub_configure_args \
	   --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
	{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
   { (exit 1); exit 1; }; }
    fi

    cd $ac_popdir
  done
fi


if test $llvmgccwarn = yes
then
	{ echo "$as_me:$LINENO: WARNING: ***** llvm C/C++ front end was not found, or does not" >&5
echo "$as_me: WARNING: ***** llvm C/C++ front end was not found, or does not" >&2;}
	{ echo "$as_me:$LINENO: WARNING: ***** appear to be working." >&5
echo "$as_me: WARNING: ***** appear to be working." >&2;}
	{ echo "$as_me:$LINENO: WARNING: ***** " >&5
echo "$as_me: WARNING: ***** " >&2;}
	{ echo "$as_me:$LINENO: WARNING: ***** Please check configure's --with-llvmgccdir option." >&5
echo "$as_me: WARNING: ***** Please check configure's --with-llvmgccdir option." >&2;}
	{ echo "$as_me:$LINENO: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&5
echo "$as_me: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&2;}
	{ echo "$as_me:$LINENO: WARNING: ***** but you should be able to build the llvm tools." >&5
echo "$as_me: WARNING: ***** but you should be able to build the llvm tools." >&2;}
fi