Newer
Older
25001
25002
25003
25004
25005
25006
25007
25008
25009
25010
25011
25012
25013
25014
25015
25016
25017
25018
25019
# Transform confdefs.h into two sed scripts, `conftest.defines' and
# `conftest.undefs', that substitutes the proper values into
# config.h.in to produce config.h. The first handles `#define'
# templates, and the second `#undef' templates.
# And first: Protect against being on the right side of a sed subst in
# config.status. Protect against being in an unquoted here document
# in config.status.
rm -f conftest.defines conftest.undefs
# Using a here document instead of a string reduces the quoting nightmare.
# Putting comments in sed scripts is not portable.
#
# `end' is used to avoid that the second main sed command (meant for
# 0-ary CPP macros) applies to n-ary macro definitions.
# See the Autoconf documentation for `clear'.
cat >confdef2sed.sed <<\_ACEOF
s/[\\&,]/\\&/g
s,[\\$`],\\&,g
t clear
: clear
s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
t end
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
: end
_ACEOF
# If some macros were called several times there might be several times
# the same #defines, which is useless. Nevertheless, we may not want to
# sort them, since we want the *last* AC-DEFINE to be honored.
uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
rm -f confdef2sed.sed
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >>conftest.undefs <<\_ACEOF
s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
_ACEOF
# Break up conftest.defines because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
echo ' :' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.defines >/dev/null
do
# Write a limited-size here document to $tmp/defines.sed.
echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#define' lines.
echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/defines.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
rm -f conftest.defines
mv conftest.tail conftest.defines
done
rm -f conftest.defines
echo ' fi # grep' >>$CONFIG_STATUS
echo >>$CONFIG_STATUS
# Break up conftest.undefs because some shells have a limit on the size
# of here documents, and old seds have small limits too (100 cmds).
echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
while grep . conftest.undefs >/dev/null
do
# Write a limited-size here document to $tmp/undefs.sed.
echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
# Speed up: don't consider the non `#undef'
echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
25079
25080
25081
25082
25083
25084
25085
25086
25087
25088
25089
25090
25091
25092
25093
25094
25095
25096
25097
25098
25099
25100
25101
25102
25103
25104
25105
# Work around the forget-to-reset-the-flag bug.
echo 't clr' >>$CONFIG_STATUS
echo ': clr' >>$CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
echo 'CEOF
sed -f $tmp/undefs.sed $tmp/in >$tmp/out
rm -f $tmp/in
mv $tmp/out $tmp/in
' >>$CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
rm -f conftest.undefs
mv conftest.tail conftest.undefs
done
rm -f conftest.undefs
cat >>$CONFIG_STATUS <<\_ACEOF
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
if test x"$ac_file" = x-; then
echo "/* Generated by configure. */" >$tmp/config.h
else
echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
fi
cat $tmp/in >>$tmp/config.h
rm -f $tmp/in
if test x"$ac_file" != x-; then
if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
rm -f $ac_file
mv $tmp/config.h $ac_file
fi
else
cat $tmp/config.h
rm -f $tmp/config.h
fi
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
25158
25159
25160
25161
25162
25163
25164
25165
25166
25167
25168
25169
25170
25171
25172
25173
25174
25175
25176
25177
25178
25179
25180
25181
25182
25183
25184
25185
25186
25187
25188
25189
25190
25191
25192
25193
25194
25195
25196
25197
25198
25199
25200
25201
25202
25203
25204
25205
25206
25207
25208
25209
25210
25211
25212
25213
25214
25215
25216
25217
25218
25219
25220
25221
25222
25223
25224
25225
25226
25227
25228
25229
25230
25231
25232
25233
25234
25235
25236
25237
25238
25239
25240
25241
25242
25243
25244
25245
25246
25247
25248
25249
25250
25251
25252
25253
25254
25255
25256
25257
25258
25259
25260
25261
25262
25263
25264
25265
25266
25267
25268
25269
25270
25271
25272
25273
25274
25275
25276
25277
25278
25279
25280
25281
25282
25283
25284
25285
25286
25287
25288
25289
25290
25291
25292
25293
25294
25295
#
# CONFIG_LINKS section.
#
for ac_file in : $CONFIG_LINKS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
{ echo "$as_me:$LINENO: linking $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: linking $srcdir/$ac_source to $ac_dest" >&6;}
if test ! -r $srcdir/$ac_source; then
{ { echo "$as_me:$LINENO: error: $srcdir/$ac_source: file not found" >&5
echo "$as_me: error: $srcdir/$ac_source: file not found" >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f $ac_dest
# Make relative symlinks.
ac_dest_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
{ if $as_mkdir_p; then
mkdir -p "$ac_dest_dir"
else
as_dir="$ac_dest_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dest_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dest_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dest_dir" != .; then
ac_dir_suffix=/`echo "$ac_dest_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dest_dir";;
*)
case "$ac_dest_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dest_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dest_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
case $srcdir in
[\\/$]* | ?:[\\/]* ) ac_rel_source=$srcdir/$ac_source ;;
*) ac_rel_source=$ac_top_builddir$srcdir/$ac_source ;;
esac
# Try a symlink, then a hard link, then a copy.
ln -s $ac_rel_source $ac_dest 2>/dev/null ||
ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
cp -p $srcdir/$ac_source $ac_dest ||
{ { echo "$as_me:$LINENO: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&5
echo "$as_me: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&2;}
{ (exit 1); exit 1; }; }
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_dest" : 'X\(//\)[^/]' \| \
X"$ac_dest" : 'X\(//\)$' \| \
X"$ac_dest" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
25314
25315
25316
25317
25318
25319
25320
25321
25322
25323
25324
25325
25326
25327
25328
25329
25330
25331
25332
25333
25334
25335
25336
25337
25338
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
25339
25340
25341
25342
25343
25344
25345
25346
25347
25348
25349
25350
25351
25352
25353
25354
25355
25356
25357
25358
25359
25360
25361
25362
25363
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
25364
25365
25366
25367
25368
25369
25370
25371
25372
25373
25374
25375
25376
25377
25378
25379
25380
25381
25382
25383
25384
25385
25386
25387
25388
25389
25390
25391
25392
25393
25394
25395
25396
25397
25398
25399
25400
25401
25402
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile Makefile ;;
Makefile.common ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/Makefile.common Makefile.common ;;
examples/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/examples/Makefile examples/Makefile ;;
lib/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/lib/Makefile lib/Makefile ;;
runtime/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/runtime/Makefile runtime/Makefile ;;
test/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile test/Makefile ;;
test/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Makefile.tests test/Makefile.tests ;;
test/QMTest/llvm.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvm.py test/QMTest/llvm.py ;;
test/QMTest/llvmdb.py ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/QMTest/llvmdb.py test/QMTest/llvmdb.py ;;
test/Programs/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile test/Programs/Makefile ;;
test/Programs/Makefile.programs ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile.programs test/Programs/Makefile.programs ;;
test/Programs/Makefile.tests ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/Makefile.tests test/Programs/Makefile.tests ;;
test/Programs/TEST.aa.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.aa.Makefile test/Programs/TEST.aa.Makefile ;;
test/Programs/TEST.dsgraph.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.report test/Programs/TEST.dsgraph.report ;;
test/Programs/TEST.aa.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.aa.report test/Programs/TEST.aa.report ;;
test/Programs/TEST.example.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.example.Makefile test/Programs/TEST.example.Makefile ;;
test/Programs/TEST.nightly.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.nightly.Makefile test/Programs/TEST.nightly.Makefile ;;
test/Programs/TEST.buildrepo.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.buildrepo.Makefile test/Programs/TEST.buildrepo.Makefile ;;
test/Programs/TEST.jit.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.jit.Makefile test/Programs/TEST.jit.Makefile ;;
test/Programs/TEST.nightly.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.nightly.report test/Programs/TEST.nightly.report ;;
test/Programs/TEST.dsgraph.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.Makefile test/Programs/TEST.dsgraph.Makefile ;;
test/Programs/TEST.jit.report ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.jit.report test/Programs/TEST.jit.report ;;
test/Programs/TEST.typesafe.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.typesafe.Makefile test/Programs/TEST.typesafe.Makefile ;;
test/Programs/TEST.dsgraph.gnuplot ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.dsgraph.gnuplot test/Programs/TEST.dsgraph.gnuplot ;;
test/Programs/TEST.vtl.Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/TEST.vtl.Makefile test/Programs/TEST.vtl.Makefile ;;
test/Programs/External/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/Makefile test/Programs/External/Makefile ;;
test/Programs/External/SPEC/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile test/Programs/External/SPEC/Makefile ;;
John Criswell
committed
test/Programs/External/SPEC/Makefile.spec ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec test/Programs/External/SPEC/Makefile.spec ;;
Alkis Evlogimenos
committed
test/Programs/External/SPEC/Makefile.spec2000 ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec2000 test/Programs/External/SPEC/Makefile.spec2000 ;;
test/Programs/External/SPEC/Makefile.spec95 ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/External/SPEC/Makefile.spec95 test/Programs/External/SPEC/Makefile.spec95 ;;
test/Programs/MultiSource/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Makefile test/Programs/MultiSource/Makefile ;;
test/Programs/MultiSource/Makefile.multisrc ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Makefile.multisrc test/Programs/MultiSource/Makefile.multisrc ;;
test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in test/Programs/MultiSource/Benchmarks/FreeBench/analyzer/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/distray/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in test/Programs/MultiSource/Benchmarks/FreeBench/distray/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in test/Programs/MultiSource/Benchmarks/FreeBench/fourinarow/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/mason/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in test/Programs/MultiSource/Benchmarks/FreeBench/mason/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/neural/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in test/Programs/MultiSource/Benchmarks/FreeBench/neural/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in test/Programs/MultiSource/Benchmarks/FreeBench/pcompress2/test.in ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile test/Programs/MultiSource/Benchmarks/FreeBench/pifft/Makefile ;;
test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in test/Programs/MultiSource/Benchmarks/FreeBench/pifft/test.in ;;
test/Programs/SingleSource/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/Makefile test/Programs/SingleSource/Makefile ;;
test/Programs/SingleSource/Makefile.singlesrc ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/Makefile.singlesrc test/Programs/SingleSource/Makefile.singlesrc ;;
Alkis Evlogimenos
committed
test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile test/Programs/SingleSource/UnitTests/SetjmpLongjmp/Makefile ;;
tools/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/tools/Makefile tools/Makefile ;;
utils/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/utils/Makefile utils/Makefile ;;
projects/Makefile ) ${SHELL} ${srcdir}/autoconf/install-sh -c ${srcdir}/projects/Makefile projects/Makefile ;;
esac
done
_ACEOF
25462
25463
25464
25465
25466
25467
25468
25469
25470
25471
25472
25473
25474
25475
25476
25477
25478
25479
25480
cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
John Criswell
committed
25492
25493
25494
25495
25496
25497
25498
25499
25500
25501
25502
25503
25504
25505
25506
25507
25508
25509
25510
25511
25512
25513
25514
25515
25516
25517
25518
25519
25520
25521
25522
25523
25524
25525
25526
25527
25528
25529
25530
25531
25532
25533
25534
25535
25536
25537
25538
25539
25540
25541
25542
25543
25544
25545
25546
25547
25548
#
# CONFIG_SUBDIRS section.
#
if test "$no_recursion" != yes; then
# Remove --cache-file and --srcdir arguments so they do not pile up.
ac_sub_configure_args=
ac_prev=
for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
*) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"
ac_popdir=`pwd`
for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
test -d $srcdir/$ac_dir || continue
{ echo "$as_me:$LINENO: configuring in $ac_dir" >&5
echo "$as_me: configuring in $ac_dir" >&6;}
{ if $as_mkdir_p; then
mkdir -p "$ac_dir"
else
as_dir="$ac_dir"
as_dirs=
while test ! -d "$as_dir"; do
as_dirs="$as_dir $as_dirs"
as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
John Criswell
committed
25553
25554
25555
25556
25557
25558
25559
25560
25561
25562
25563
25564
25565
25566
25567
25568
25569
25570
25571
25572
25573
25574
25575
25576
25577
25578
25579
25580
25581
25582
25583
25584
25585
25586
25587
25588
25589
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'`
done
test ! -n "$as_dirs" || mkdir $as_dirs
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
if test "$ac_dir" != .; then
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
ac_dir_suffix= ac_top_builddir=
fi
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[\\/]* | ?:[\\/]* ) # Absolute path.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir ;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac
25590
25591
25592
25593
25594
25595
25596
25597
25598
25599
25600
25601
25602
25603
25604
25605
25606
25607
25608
25609
25610
25611
25612
25613
25614
25615
25616
25617
25618
25619
25620
25621
25622
25623
25624
25625
25626
25627
25628
# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
case "$ac_dir" in
.) ac_abs_builddir=`pwd`;;
[\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
*) ac_abs_builddir=`pwd`/"$ac_dir";;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
case ${ac_top_builddir}. in
.) ac_abs_top_builddir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
*) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
case $ac_srcdir in
.) ac_abs_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
*) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
case $ac_top_srcdir in
.) ac_abs_top_srcdir=$ac_abs_builddir;;
[\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
*) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
esac;;
esac
John Criswell
committed
25629
25630
25631
25632
25633
25634
25635
25636
25637
25638
25639
25640
25641
25642
25643
25644
25645
25646
25647
25648
25649
25650
25651
cd $ac_dir
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_srcdir/configure.gnu; then
ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
elif test -f $ac_srcdir/configure; then
ac_sub_configure="$SHELL '$ac_srcdir/configure'"
elif test -f $ac_srcdir/configure.in; then
ac_sub_configure=$ac_configure
else
{ echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
ac_sub_configure=
fi
# The recursion is here.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
ac_sub_cache_file=$ac_top_builddir$cache_file ;;
John Criswell
committed
esac
{ echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
eval $ac_sub_configure $ac_sub_configure_args \
--cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
John Criswell
committed
echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
{ (exit 1); exit 1; }; }
fi
cd $ac_popdir
done
fi
if test $llvmgccwarn = yes
then
{ echo "$as_me:$LINENO: WARNING: ***** llvm C/C++ front end was not found, or does not" >&5
echo "$as_me: WARNING: ***** llvm C/C++ front end was not found, or does not" >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** appear to be working." >&5
echo "$as_me: WARNING: ***** appear to be working." >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** " >&5
echo "$as_me: WARNING: ***** " >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** Please check configure's --with-llvmgccdir option." >&5
echo "$as_me: WARNING: ***** Please check configure's --with-llvmgccdir option." >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&5
echo "$as_me: WARNING: ***** Runtime libraries (in llvm/runtime) will not be built," >&2;}
{ echo "$as_me:$LINENO: WARNING: ***** but you should be able to build the llvm tools." >&5
echo "$as_me: WARNING: ***** but you should be able to build the llvm tools." >&2;}
fi