llvm-svn: 196634

llvm-svn: 192604

llvm-svn: 191423

llvm-svn: 187722

Use SmallVectorImpl instead of SmallVector for iterators and references to avoid specifying the vector size unnecessarily.

llvm-svn: 185512

Access the TargetLoweringInfo from the TargetMachine object instead of caching it. The TLI may change between functions. No functionality change.

llvm-svn: 184352

Access the TargetLoweringInfo from the TargetMachine object instead of caching it. The TLI may change between functions. No functionality change.

llvm-svn: 184349

The DWARF EH pass doesn't need the TargetMachine, only the TargetLoweringBase like the other EH passes.

llvm-svn: 182321

llvm-svn: 179275

The target hooks are getting out of hand. What does it mean to run
before or after regalloc anyway? Allowing either Pass* or AnalysisID
pass identification should make it much easier for targets to use the
substitutePass and insertPass APIs, and create less need for badly
named target hooks.

llvm-svn: 179140

It was superseded by MachineBlockPlacement and disabled by default since LLVM 3.1.

llvm-svn: 178349

llvm-svn: 176467

llvm-svn: 174830

Move the early if-conversion pass into this group.

ILP optimizations usually need to find the right balance between
register pressure and ILP using the MachineTraceMetrics analysis to
identify critical paths and estimate other costs. Such passes should run
together so they can share dominator tree and loop info analyses.

Besides if-conversion, future passes to run here here could include
expression height reduction and ARM's MLxExpansion pass.

llvm-svn: 172687

TargetTransformInfo rather than TargetLowering, removing one of the
primary instances of the layering violation of Transforms depending
directly on Target.

This is a really big deal because LSR used to be a "special" pass that
could only be tested fully using llc and by looking at the full output
of it. It also couldn't run with any other loop passes because it had to
be created by the backend. No longer is this true. LSR is now just
a normal pass and we should probably lift the creation of LSR out of
lib/CodeGen/Passes.cpp and into the PassManagerBuilder. =] I've not done
this, or updated all of the tests to use opt and a triple, because
I suspect someone more familiar with LSR would do a better job. This
change should be essentially without functional impact for normal
compilations, and only change behvaior of targetless compilations.

The conversion required changing all of the LSR code to refer to the TTI
interfaces, which fortunately are very similar to TargetLowering's
interfaces. However, it also allowed us to *always* expect to have some
implementation around. I've pushed that simplification through the pass,
and leveraged it to simplify code somewhat. It required some test
updates for one of two things: either we used to skip some checks
altogether but now we get the default "no" answer for them, or we used
to have no information about the target and now we do have some.

I've also started the process of removing AddrMode, as the TTI interface
doesn't use it any longer. In some cases this simplifies code, and in
others it adds some complexity, but I think it's not a bad tradeoff even
there. Subsequent patches will try to clean this up even further and use
other (more appropriate) abstractions.

Yet again, almost all of the formatting changes brought to you by
clang-format. =]

llvm-svn: 171735

llvm-svn: 170836

Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.

Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]

llvm-svn: 169131

The original patch removed a bunch of code that the SjLjEHPrepare pass placed
into the entry block if all of the landing pads were removed during the
CodeGenPrepare class. The more natural way of doing things is to run the CGP
*before* we run the SjLjEHPrepare pass.

Make it so!

llvm-svn: 169044

llvm-svn: 168294

This allows me to begin enabling (or backing out) misched by default
for one subtarget at a time. To run misched we typically want to:
- Disable SelectionDAG scheduling (use the source order scheduler)
- Enable more aggressive coalescing (until we decide to always run the coalescer this way)
- Enable MachineScheduler pass itself.

Disabling PostRA sched may follow for some subtargets.

llvm-svn: 167826

llvm-svn: 166340

llvm-svn: 166264

The TargetTransform changes are breaking LTO bootstraps of clang.  I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.

This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741

llvm-svn: 166168

Add a new interface to allow IR-level passes to access codegen-specific information.

llvm-svn: 165665

Enable the pass by default for targets that request it, and change the
-enable-early-ifcvt to the opposite -disable-early-ifcvt.

There are still some x86 regressions when enabling early if-conversion
because of the missing machine models. Disable the pass for x86 until
machine models are added.

llvm-svn: 165075

Add a new optimization pass: Stack Coloring, that merges disjoint static allocations (allocas). Allocas are known to be
disjoint if they are marked by disjoint lifetime markers (@llvm.lifetime.XXX intrinsics).

llvm-svn: 163299

llvm-svn: 163258

This pass often has weird CFG hacks and hand-written MI building code
that can go wrong in many ways.

llvm-svn: 162224

This option runs LiveIntervals before TwoAddressInstructionPass which
will eventually learn to exploit and update the analysis.

Eventually, LiveIntervals will run before PHIElimination, and we can get
rid of LiveVariables.

llvm-svn: 161270

llvm-svn: 159720

This pass performs if-conversion on SSA form machine code by
speculatively executing both sides of the branch and using a cmov
instruction to select the result. This can help lower the number of
branch mispredictions on architectures like x86 that don't have
predicable instructions.

The current implementation is very aggressive, and causes regressions on
mosts tests. It needs good heuristics that have yet to be implemented.

llvm-svn: 159694

It appears to have caught a use-after-free introduced as by r159567
and/or friends which call 'addPass' from many more places. The bug in
'addPass' doesn't appear to be new, and was spotted by inspection when
ASan shown a bright light of a stacktrace at these functions.

Hopefully this will fix the ASan failure -- I have no test case other
than running an ASan-built clang over the test suite.

llvm-svn: 159614

This is still a work in progress but I believe it is currently good enough
to fix PR13122 "Need unit test driver for codegen IR passes".  For example,
you can run llc with -stop-after=loop-reduce to have it dump out the IR after
running LSR.  Serializing machine-level IR is not yet supported but we have
some patches in progress for that.

The plan is to serialize the IR to a YAML file, containing separate sections
for the LLVM IR, machine-level IR, and whatever other info is needed.  Chad
suggested that we stash the stop-after pass in the YAML file and use that
instead of the start-after option to figure out where to restart the
compilation.  I think that's a great idea, but since it's not implemented yet
I put the -start-after option into this patch for testing purposes.

llvm-svn: 159570

llvm-svn: 159569

This makes it possible to just use a zero value to represent "no pass", so
the phony NoPassID global variable is no longer needed.

llvm-svn: 159568

This is a preliminary step toward having TargetPassConfig be able to
start and stop the compilation at specified passes for unit testing
and debugging.  No functionality change.

llvm-svn: 159567

Such passes can be used to tweak the register assignments in a
target-dependent way, for example to avoid write-after-write
dependencies.

llvm-svn: 159209

Implicitly defined virtual registers can simply have the <undef> bit set
on all uses, and copies can be turned into implicit defs recursively.

Physical registers are a bit trickier. We handle the common case where a
physreg def is used by a nearby instruction in the same basic block. For
more complicated cases, just leave the IMPLICIT_DEF instruction in.

llvm-svn: 159149

OK, not really. We don't want to reintroduce the old rewriter hacks.

This patch extracts virtual register rewriting as a separate pass that
runs after the register allocator. This is possible now that
CodeGen/Passes.cpp can configure the full optimizing register allocator
pipeline.

The rewriter pass uses register assignments in VirtRegMap to rewrite
virtual registers to physical registers, and it inserts kill flags based
on live intervals.

These finalization steps are the same for the optimizing register
allocators: RABasic, RAGreedy, and PBQP.

llvm-svn: 158244

Besides adding the new insertPass function, this patch uses it to
enhance the existing -print-machineinstrs so that the MachineInstrs
after a specific pass can be printed.

Patch by Bin Zeng!

llvm-svn: 157655