llvm-svn: 60632

llvm-svn: 60609

loops when they can be subsumed into addressing modes.

Change X86 addressing mode check to realize that
some PIC references need an extra register.
(I believe this is correct for Linux, if not, I'm sure
someone will tell me.)

llvm-svn: 60608

Reason #3 from 60595 doesn't hold true. If we can fold a PIC load from constpool into a use, the rewrite happens at time of spill (not in VirtRegMap). Later on, if the GlobalBaseReg is spilled, the spiller can see the use uses GlobalBaseReg and do the right thing.

llvm-svn: 60596

Effectively undo 60461 in PIC mode which simply transform V_SET0 / V_SETALLONES into a load from constpool in order to fold into restores. This is not safe to do when PIC base is being used for a number of reasons:
1. GlobalBaseReg may have been spilled.
2. It may not be live at the use.
3. Spiller doesn't know this is happening so it won't prevent GlobalBaseReg from being spilled later (That by itself is a nasty hack. It's needed because we don't insert the reload until later).

llvm-svn: 60595

Re-did 60519. It turns out Darwin's handling of hidden visibility symbols are a bit more complicate than I expected. Both declarations and weak definitions still need a stub indirection. However, the stubs are in data section and they contain the addresses of the actual symbols.

llvm-svn: 60571

/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.obj/./gcc/xgcc -B/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.obj/./gcc/ -B/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/bin/ -B/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/lib/ -isystem /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/include -isystem /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/sys-include -DHAVE_CONFIG_H -I. -I../../../llvm-gcc.src/libgomp -I. -I../../../llvm-gcc.src/libgomp/config/posix -I../../../llvm-gcc.src/libgomp -Wall -pthread -Werror -O2 -g -O2 -MT barrier.lo -MD -MP -MF .deps/barrier.Tpo -c ../../../llvm-gcc.src/libgomp/barrier.c  -fno-common -DPIC -o .libs/barrier.o
checking for sys/file.h... /var/folders/zG/zGE-ZJOGFiGjv0B5cs5oYE+++TM/-Tmp-//cc34Jg5P.s:13:non-relocatable subtraction expression, "_gomp_tls_key" minus "L1$pb"
/var/folders/zG/zGE-ZJOGFiGjv0B5cs5oYE+++TM/-Tmp-//cc34Jg5P.s:13:symbol: "_gomp_tls_key" can't be undefined in a subtraction expression
make[4]: *** [barrier.lo] Error 1
make[4]: *** Waiting for unfinished jobs....
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.obj/./gcc/xgcc -B/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.obj/./gcc/ -B/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/bin/ -B/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/lib/ -isystem /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/include -isystem /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm-gcc.install/i386-apple-darwin9.5.0/sys-include -DHAVE_CONFIG_H -I. -I../../../llvm-gcc.src/libgomp -I. -I../../../llvm-gcc.src/libgomp/config/posix -I../../../llvm-gcc.src/libgomp -Wall -pthread -Werror -O2 -g -O2 -MT alloc.lo -MD -MP -MF .deps/alloc.Tpo -c ../../../llvm-gcc.src/libgomp/alloc.c -o alloc.o >/dev/null 2>&1
yes
checking for sys/param.h... make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-target-libgomp] Error 2
make[1]: *** Waiting for unfinished jobs....

llvm-svn: 60527

llvm-svn: 60519

llvm-svn: 60499

parts, and add target-independent code to add/preserve
MachineMemOperands.

llvm-svn: 60488

llvm-svn: 60487

the frame reference. This will help post-RA scheduling determine
that spills to distinct stack slots are independent.

llvm-svn: 60486

Print a single parameter .file directive if we have an ELF target.

llvm-svn: 60480

llvm-svn: 60478

llvm-svn: 60477

foldMemoryOperand how to "fold" them, by converting them into constant-pool
loads. When they aren't folded, they use xorps/cmpeqd, but for example when
register pressure is high, they may now be folded as memory operands, which
reduces register pressure.

Also, mark V_SET0 isAsCheapAsAMove so that two-address-elimination will
remat it instead of copying zeros around (V_SETALLONES was already marked).

llvm-svn: 60461

than just i32.

llvm-svn: 60455

delegates to the regular x86-32 convention which handles byval, but only
after it handles a few cases, and it's necessary to handle byval before
handling those cases. This fixes PR3122 (and rdar://6400815), llvm-gcc
miscompiling LLVM.

llvm-svn: 60453

- LowerXADDO lowers [SU]ADDO into an ADD with an implicit EFLAGS define. The
  EFLAGS are fed into a SETCC node which has the conditional COND_O or COND_C,
  depending on the type of ADDO requested.

- LowerBRCOND now recognizes if it's coming from a SETCC node with COND_O or
  COND_C set.

llvm-svn: 60388

llvm-svn: 60385

llvm-svn: 60383

- Add support for seto, setno, setc, and setnc instructions.

llvm-svn: 60382

MERGE_VALUES node with only one operand, so get
rid of special code that only existed to handle
that possibility.

llvm-svn: 60349

ReplaceNodeResults: rather than returning a node which
must have the same number of results as the original
node (which means mucking around with MERGE_VALUES,
and which is also easy to get wrong since SelectionDAG
folding may mean you don't get the node you expect),
return the results in a vector.

llvm-svn: 60348

llvm-svn: 60286

being both a namespace and a variable name.

llvm-svn: 60208

llvm-svn: 60156

On x86 favors folding short immediate into some arithmetic operations (e.g. add, and, xor, etc.) because materializing an immediate in a register is expensive in turns of code size.
e.g.
movl 4(%esp), %eax
addl $4, %eax

is 2 bytes shorter than

movl $4, %eax
addl 4(%esp), %eax

llvm-svn: 60139

the conditional for the BRCOND statement. For instance, it will generate:

    addl %eax, %ecx
    jo LOF

instead of

    addl %eax, %ecx
    ; About 10 instructions to compare the signs of LHS, RHS, and sum.
    jl LOF

llvm-svn: 60123

llvm-svn: 60095

- Mark "add with overflow" as having a custom lowering for X86. Give it a null
  lowering representation for now.

llvm-svn: 59971

Move target independent td files from lib/Target/ to include/llvm/Target so they can be distributed along with the header files.

llvm-svn: 59953

llvm-svn: 59929

practice these booleans are mostly produced by SetCC,
however the concept is more general.

llvm-svn: 59911

llvm-svn: 59901

llvm-svn: 59872

llvm-svn: 59720

llvm-svn: 59677

Discourage (allocate last) use of x86_64 R12 and R13 due to their
longer instruction encodings.

llvm-svn: 59644

they trap on divide-by-zero, and this side effect is otherwise
unmodeled.

llvm-svn: 59551