for CellSPU modifications:

- SPUInstrInfo.td refactoring: "multiclass" really is _your_ friend.
- Other improvements based on refactoring effort in SPUISelLowering.cpp,
  esp. in SPUISelLowering::PerformDAGCombine(), where zero amount shifts and
  rotates are now eliminiated, other scalar-to-vector-to-scalar silliness
  is also eliminated.
- 64-bit operations are being implemented, _muldi3.c gcc runtime now
  compiles and generates the right code. More work still needs to be done.

llvm-svn: 47532

llvm-svn: 47375

I cannot find a libgcc function for this builtin.  Therefor expanding it to a noop (which is how it use to be treated).  If someone who knows the x86 backend better than me could tell me how to get a lock prefix on an instruction, that would be nice to complete x86 support.

llvm-svn: 47213

it follows the order of the enum, not alphabetical.
The motivation is to make -mattr=+ssse3,+sse41
select SSE41 as it ought to.  Added "ignored"
enum values of 0 to PPC and SPU to avoid compiler
warnings.

llvm-svn: 47143

which allows us to kill a target-specific node.

llvm-svn: 47127

llvm-svn: 47115

to pass the mask APInt by value, not by reference. 

llvm-svn: 47096

DAGCombine is now quite good at zapifying them.

llvm-svn: 47053

Add an overload that supports the uint64_t interface for use by clients
that haven't been updated yet.

llvm-svn: 47039

llvm-svn: 46930

It's not always safe to fold movsd into xorpd, etc. Check the alignment of the load address first to make sure it's 16 byte aligned.

llvm-svn: 46893

Move to getCALLSEQ_END to ensure CALLSEQ_END node produces a flag. This is consistent with the definition in td file.

llvm-svn: 46775

Dwarf requires variable entries to be in the source order. Right now, since we are recording variable information at isel time this means parameters would appear in the reverse order. The short term fix is to issue recordVariable() at asm printing time instead.

llvm-svn: 46724

llvm-svn: 46667

SDIsel processes llvm.dbg.declare by recording the variable debug information descriptor and its corresponding stack frame index in MachineModuleInfo. This only works if the local variable is "homed" in the stack frame. It does not work for byval parameter, etc.
Added ISD::DECLARE node type to represent llvm.dbg.declare intrinsic. Now the intrinsic calls are lowered into a SDNode and lives on through out the codegen passes.
For now, since all the debugging information recording is done at isel time, when a ISD::DECLARE node is selected, it has the side effect of also recording the variable. This is a short term solution that should be fixed in time.

llvm-svn: 46659

Add an extra operand to LABEL nodes which distinguishes between debug, EH, or misc labels. This fixes the EH breakage. However I am not convinced this is *the* solution.

llvm-svn: 46609

Even though InsertAtEndOfBasicBlock is an ugly hack it still deserves a proper name. Rename it to EmitInstrWithCustomInserter since it does not necessarily insert
instruction at the end.

llvm-svn: 46562

- Expand tabs... (poss 80-col violations, will get them later...)
- Consolidate logic for SelectDFormAddr and SelectDForm2Addr into a single
  function, simplifying maintenance. Also reduced custom instruction
  generation for SPUvecinsert/INSERT_MASK.

llvm-svn: 46544

and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.

llvm-svn: 46538

only two addressing mode nodes, SPUaform and SPUindirect (vice the
three previous ones, SPUaform, SPUdform and SPUxform). This improves
code somewhat because we now avoid using reg+reg addressing when
it can be avoided. It also simplifies the address selection logic,
which was the main point for doing this.

Also, for various global variables that would be loaded using SPU's
A-form addressing, prefer D-form offs[reg] addressing, keeping the
base in a register if the variable is used more than once.

llvm-svn: 46483

Fixed CellSPU's A-form (local store) address mode, so that all globals,
externals, constant pool and jump table symbols are now wrapped within
a SPUISD::AFormAddr pseudo-instruction. This now identifies all local
store memory addresses, although it requires a bit of legerdemain during
instruction selection to properly select loads to and stores from local
store, properly generating "LQA" instructions.

Also added mul_ops.ll test harness for exercising integer multiplication.

llvm-svn: 46142

1. Legalize now always promotes truncstore of i1 to i8. 
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
   X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
   safe.

The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:

_foo:
	fldt	20(%esp)
	fldt	4(%esp)
	faddp	%st(1)
	movl	36(%esp), %eax
	fstps	(%eax)
	ret

instead of:

_foo:
	subl	$4, %esp
	fldt	24(%esp)
	fldt	8(%esp)
	faddp	%st(1)
	fstps	(%esp)
	movl	40(%esp), %eax
	movss	(%esp), %xmm0
	movss	%xmm0, (%eax)
	addl	$4, %esp
	ret

llvm-svn: 46140

Move definition of 'trap' sdnode up from x86 instrinfo to targetselectiondag.td.

llvm-svn: 46017

llvm-svn: 45917

- struct_2.ll: Completely unaligned load/store testing

- call_indirect.ll, struct_1.ll: Add test lines to exercise
   X-form [$reg($reg)] addressing

At this point, loads and stores should be under control (he says
in an optimistic tone of voice.)

llvm-svn: 45882

- Cleaned up custom load/store logic, common code is now shared [see note
  below], cleaned up address modes

- More test cases: various intrinsics, structure element access (load/store
  test), updated target data strings, indirect function calls.

Note: This patch contains a refactoring of the LoadSDNode and StoreSDNode
structures: they now share a common base class, LSBaseSDNode, that
provides an interface to their common functionality. There is some hackery
to access the proper operand depending on the derived class; otherwise,
to do a proper job would require finding and rearranging the SDOperands
sent to StoreSDNode's constructor. The current refactor errs on the
side of being conservatively and backwardly compatible while providing
functionality that reduces redundant code for targets where loads and
stores are custom-lowered.

llvm-svn: 45851

llvm-svn: 45683

llvm-svn: 45679

Some day I'll get it all moved over...

llvm-svn: 45672

llvm-svn: 45667

instead of "ISD::STORE".  This allows us to mark target-specific dag
nodes as storing (such as ppc byteswap stores).  This allows us to remove
more explicit isStore flags from the .td files.

Finally, add a warning for when a .td file contains an explicit 
isStore and tblgen is able to infer it.

llvm-svn: 45654

llvm-svn: 45484

a header file from libcodegen.  This violates a layering order: codegen
depends on target, not the other way around.  The fix to this is to 
split TII into two classes, TII and TargetInstrInfoImpl, which defines
stuff that depends on libcodegen.  It is defined in libcodegen, where 
the base is not.

llvm-svn: 45475

Machine-level API cleanup instigated by Chris.

llvm-svn: 45470

that "machine" classes are used to represent the current state of
the code being compiled.  Given this expanded name, we can start 
moving other stuff into it.  For now, move the UsedPhysRegs and
LiveIn/LoveOuts vectors from MachineFunction into it.

Update all the clients to match.

This also reduces some needless #includes, such as MachineModuleInfo
from MachineFunction.

llvm-svn: 45467

e.g. MO.isMBB() instead of MO.isMachineBasicBlock().  I don't plan on 
switching everything over, so new clients should just start using the 
shorter names.

Remove old long accessors, switching everything over to use the short
accessor: getMachineBasicBlock() -> getMBB(), 
getConstantPoolIndex() -> getIndex(), setMachineBasicBlock -> setMBB(), etc.

llvm-svn: 45464

Use MachineOperand::getImm instead of MachineOperand::getImmedValue.  Likewise setImmedValue -> setImm

llvm-svn: 45453

llvm-svn: 45418

llvm-svn: 45415

llvm-svn: 45325