a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.

The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.

The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.

The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.

The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.

The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.

The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.

The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.

Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.

Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.

Commits to update DragonEgg and Clang will be made presently.

llvm-svn: 171681

into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.

There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.

The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.

I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).

I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.

llvm-svn: 171366

llvm-svn: 170654

- fix a bug which cause sigfault.
- add two testing cases which was causing crash

llvm-svn: 169687

There are still bugs in this pass, as well as other issues that are
being worked on, but the bugs are crashers that occur pretty easily in
the wild. Test cases have been sent to the original commit's review
thread.

This reverts the commits:
  r169671: Fix a logic error.
  r169604: Move the popcnt tests to an X86 subdirectory.
  r168931: Initial commit adding the pass.

llvm-svn: 169683

missed in the first pass because the script didn't yet handle include
guards.

Note that the script is now able to handle all of these headers without
manual edits. =]

llvm-svn: 169224

This revision attempts to recognize following population-count pattern:

 while(a) { c++; ... ; a &= a - 1; ... },
  where <c> and <a>could be used multiple times in the loop body.

 TODO: On X8664 and ARM, __buildin_ctpop() are not expanded to a efficent 
instruction sequence, which need to be improved in the following commits.

Reviewed by Nadav, really appreciate!

llvm-svn: 168931

Add a stub for the x86 cost model impl. Implement a basic cost rule for inserting/extracting from XMM registers.

llvm-svn: 167333

All the credit goes to Jan Voung for noticing it was dead!

llvm-svn: 166902

llvm-svn: 166248

The TargetTransform changes are breaking LTO bootstraps of clang.  I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.

This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741

llvm-svn: 166168

Add a new interface to allow IR-level passes to access codegen-specific information.

llvm-svn: 165665

llvm-svn: 165402

Reorder includes in Target backends to following coding standards. Remove some superfluous forward declarations.

llvm-svn: 152997

Passes prior to instructon selection are now split into separate configurable stages.
Header dependencies are simplified.
The bulk of this diff is simply removal of the silly DisableVerify flags.

Sorry for the target header churn. Attempting to stabilize them.

llvm-svn: 149754

Allows command line overrides to be centralized in LLVMTargetMachine.cpp.
LLVMTargetMachine can intercept common passes and give precedence to command line overrides.
Allows adding "internal" target configuration options without touching TargetOptions.
Encapsulates the PassManager.
Provides a good point to initialize all CodeGen passes so that Pass ID's can be used in APIs.
Allows modifying the target configuration hooks without rebuilding the world.

llvm-svn: 149672

llvm-svn: 149671

Adds an instruction itinerary to all x86 instructions, giving each a default latency of 1, using the InstrItinClass IIC_DEFAULT.

Sets specific latencies for Atom for the instructions in files X86InstrCMovSetCC.td, X86InstrArithmetic.td, X86InstrControl.td, and X86InstrShiftRotate.td. The Atom latencies for the remainder of the x86 instructions will be set in subsequent patches.

Adds a test to verify that the scheduler is working.

Also changes the scheduling preference to "Hybrid" for i386 Atom, while leaving x86_64 as ILP.

Patch by Preston Gurd!

llvm-svn: 149558

llvm-svn: 146960

change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.

One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.

llvm-svn: 145714

and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.

llvm-svn: 144788

- Introduce JITDefault code model. This tells targets to set different default
  code model for JIT. This eliminates the ugly hack in TargetMachine where
  code model is changed after construction.

llvm-svn: 135580

(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.

llvm-svn: 135468

be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.

The fix is to just have the clients explictly pass the CPU name!

llvm-svn: 134127

Rename TargetFrameInfo into TargetFrameLowering. Also, put couple of FIXMEs and fixes here and there.

llvm-svn: 123170

First step of huge frame-related refactoring: move emit{Prologue,Epilogue} out of TargetRegisterInfo to TargetFrameInfo, which is definitely much better suitable place

llvm-svn: 119097

so and also change X86 for consistency.

Investigating if this can be improved a bit.

llvm-svn: 115469

Move EmitTargetCodeForMemcpy, EmitTargetCodeForMemset, and
EmitTargetCodeForMemmove out of TargetLowering and into
SelectionDAGInfo to exercise this.

llvm-svn: 103481

const_casts, and it reinforces the design of the Target classes being
immutable.

SelectionDAGISel::IsLegalToFold is now a static member function, because
PIC16 uses it in an unconventional way. There is more room for API
cleanup here.

And PIC16's AsmPrinter no longer uses TargetLowering.

llvm-svn: 101635

On Nehalem and newer CPUs there is a 2 cycle latency penalty on using a register
in a different domain than where it was defined. Some instructions have
equvivalents for different domains, like por/orps/orpd.

The SSEDomainFix pass tries to minimize the number of domain crossings by
changing between equvivalent opcodes where possible.

This is a work in progress, in particular the pass doesn't do anything yet. SSE
instructions are tagged with their execution domain in TableGen using the last
two bits of TSFlags. Note that not all instructions are tagged correctly. Life
just isn't that simple.

The SSE execution domain issue is very similar to the ARM NEON/VFP pipeline
issue handled by NEONMoveFixPass. This pass may become target independent to
handle both.

llvm-svn: 99524

This reverts commit 99345. It was breaking buildbots.

llvm-svn: 99352

This is work in progress. So far, SSE execution domain tables are added to
X86InstrInfo, and a skeleton pass is enabled with -sse-domain-fix.

llvm-svn: 99345

Preliminary patch to improve dwarf EH generation - Hooks to return Personality / FDE / LSDA / TType encoding depending on target / options (e.g. code model / relocation model) - MCIzation of Dwarf EH printer to use encoding information - Stub generation for ELF target (needed for indirect references) - Some other small changes here and there

llvm-svn: 96285

llvm-svn: 95144

eliminate random "code emitter" stuff in Alpha, except for
the JIT path.  Next up, remove the template cruft.

llvm-svn: 95131

- Greatly improve the comments to the getLSDAEncoding method.

llvm-svn: 93796

The CIE says that the LSDA point in the FDE section is an "sdata4". That's fine,
but we need it to actually be 4-bytes in the FDE for some platforms. Allow
individual platforms to decide for themselves.

llvm-svn: 93616

by allowing backends to override routines that will default
the JIT and Static code generation to an appropriate code model
for the architecture.

Should fix PR 5773.

llvm-svn: 91824

pair instead of from a virtual method on TargetMachine.  This cuts the final
ties of TargetAsmInfo to TargetMachine, meaning that MC can now use 
TargetAsmInfo.

llvm-svn: 78802

 - The C, C++, MSIL, and Mips backends still need the module.

llvm-svn: 77927