llvm-svn: 171363

http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-December/056754.html

The proposal and implementation are fully documented here:
https://sites.google.com/a/chromium.org/dev/nativeclient/pnacl/aligned-bundling-support-in-llvm

Tests will follow shortly.

llvm-svn: 170718

Mips16 is really a processor decoding mode (ala thumb 1) and in the same
program, mips16 and mips32 functions can exist and can call each other.

If a jal type instruction encounters an address with the lower bit set, then
the processor switches to mips16 mode (if it is not already in it). If the
lower bit is not set, then it switches to mips32 mode.

The linker knows which functions are mips16 and which are mips32.
When relocation is performed on code labels, this lower order bit is
set if the code label is a mips16 code label.

In general this works just fine, however when creating exception handling
tables and dwarf, there are cases where you don't want this lower order
bit added in.

This has been traditionally distinguished in gas assembly source by using a
different syntax for the label.

lab1:      ; this will cause the lower order bit to be added
lab2=.     ; this will not cause the lower order bit to be added

In some cases, it does not matter because in dwarf and debug tables
the difference of two labels is used and in that case the lower order
bits subtract each other out.

To fix this, I have added to mcstreamer the notion of a debuglabel.
The default is for label and debug label to be the same. So calling
EmitLabel and EmitDebugLabel produce the same result.

For various reasons, there is only one set of labels that needs to be
modified for the mips exceptions to work. These are the "$eh_func_beginXXX" 
labels.

Mips overrides the debug label suffix from ":" to "=." .

This initial patch fixes exceptions. More changes most likely
will be needed to DwarfCFException to make all of this work
for actual debugging. These changes will be to emit debug labels in some
places where a simple label is emitted now.

Some historical discussion on this from gcc can be found at:
http://gcc.gnu.org/ml/gcc-patches/2008-08/msg00623.html
http://gcc.gnu.org/ml/gcc-patches/2008-11/msg01273.html 

llvm-svn: 170279

llvm-svn: 169817

llvm-svn: 169812

The linker will call `lto_codegen_add_must_preserve_symbol' on all globals that
should be kept around. The linker will pretend that a dylib is being created.
<rdar://problem/12528059>

llvm-svn: 169770

llvm-svn: 169724

llvm-svn: 169720

This function sets the `_exportDynamic' ivar. When that's set, we export all
symbols (e.g. we don't run the internalize pass). This is equivalent to the
`--export-dynamic' linker flag in GNU land:

--export-dynamic
  When creating a dynamically linked executable, add all symbols to the dynamic
  symbol table. The dynamic symbol table is the set of symbols which are visible
  from dynamic objects at run time. If you do not use this option, the dynamic
  symbol table will normally contain only those symbols which are referenced by
  some dynamic object mentioned in the link. If you use dlopen to load a dynamic
  object which needs to refer back to the symbols defined by the program, rather
  than some other dynamic object, then you will probably need to use this option
  when linking the program itself.

The Darwin linker will support this via the `-export_dynamic' flag. We should
modify clang to support this via the `-rdynamic' flag.

llvm-svn: 169656

It was a nasty oversight that we didn't include this when we added this
API in the first place. Blech.

rdar://12839439

llvm-svn: 169653

Again, tools are trickier to pick the main module header for than
library source files. I've started to follow the pattern of using
LLVMContext.h when it is included as a stub for program source files.

llvm-svn: 169252

start up and clean up module passes, now that ASAN and TSAN are fixed the
tests pass

llvm-svn: 168905

Revert r168635 "Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model".
It appears to have broken at least one buildbot.

llvm-svn: 168654

Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model

Patch by Pedro Artigas, with feedback from by Chandler Carruth.

llvm-svn: 168635

Necessary to give disassembler users (like darwin's otool) a possibility to
dlopen libLTO and still initialize the required LLVM bits. This used to go
through libMCDisassembler but that's a gross layering violation, the MC layer
can't pull in functions from the targets. Adding a function to libLTO is a bit
of a hack but not worse than exposing other disassembler bits from libLTO.

Fixes PR14362.

llvm-svn: 168545

Add doInitialization and doFinalization methods to ModulePass's, to allow them to be re-initialized and reused on multiple Module's.

Patch by Pedro Artigas.

llvm-svn: 168008

Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm.  The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.

rdar://11764962

llvm-svn: 166445

llvm-svn: 166248

The TargetTransform changes are breaking LTO bootstraps of clang.  I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.

This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741

llvm-svn: 166168

llvm-svn: 165997

This is a temporary hack until Bill's project to record command line options
in the LLVM IR is ready. Clang currently sets a default CPU but that isn't
recorded anywhere and it doesn't get used in the final LTO compilation.

llvm-svn: 165809

llvm-svn: 165599

This reverts commit 165428 in an attempt to get our buildbots going.

llvm-svn: 165574

llvm-svn: 165428

llvm-svn: 165403

file name if building Apple-style.

llvm-svn: 165185

llvm-svn: 163349

llvm-svn: 163258

PR9673

llvm-svn: 162284

make it more consistent with its intended semantics.

The `linker_private_weak_def_auto' linkage type was meant to automatically hide
globals which never had their addresses taken. It has nothing to do with the
`linker_private' linkage type, which outputs the symbols with a `l' (ell) prefix
among other things.

The intended semantic is more like the `linkonce_odr' linkage type.

Change the name of the linkage type to `linkonce_odr_auto_hide'. And therefore
changing the semantics so that it produces the correct output for the linker.

Note: The old linkage name `linker_private_weak_def_auto' will still parse but
is not a synonym for `linkonce_odr_auto_hide'. This should be removed in 4.0.
<rdar://problem/11754934>

llvm-svn: 162114

llvm-svn: 161530

llvm-svn: 161529

llvm-svn: 161356

When the command line target options were removed from the LLVM libraries, LTO
lost its ability to specify things like `-disable-fp-elim'. Add this back by
adding the command line variables to the `lto' project.
<rdar://problem/12038729>

llvm-svn: 161353

llvm-svn: 159028

There are some that I didn't remove this round because they looked like
obvious stubs. There are dead variables in gtest too, they should be
fixed upstream.

llvm-svn: 158090

This broke in r144788 when the CodeGenOpt option was moved from everywhere else
(specifically, from addPassesToEmitFile) to createTargetMachine. Since
LTOCodeGenerator wasn't passing the 4th argument, when the 4th parameter became
the 3rd, it silently continued to compile (int->bool conversion) but meant
something completely different.

This change preserves the existing (accidental) and previous (default)
semantics of the addPassesToEmitFile and restores the previous/intended
CodeGenOpt argument by passing it appropriately to createTargetMachine.

(discovered by pending changes to -Wconversion to catch constant->bool
conversions)

llvm-svn: 157705

llvm-svn: 156606

so we don't want it to show up in the stable 3.1 interface.

While at it, add a comment about why LTOCodeGenerator manually creates the
internalize pass.

llvm-svn: 154807

Revert the 'EnableInitializing' flag. There is debate on whether we should run that pass by default in LTO.

llvm-svn: 154356