otherwise the SmallVector it contains doesn't free its memory.
In most cases LiveIntervalAnalysis could get away by not calling the destructor,
because VNInfos are bumpptr-allocated, and smallvectors usually don't grow.
However when the SmallVector does grow it always leaks.

This is the valgrind shown leak from the original testcase:
==8206== 18,304 bytes in 151 blocks are definitely lost in loss record 164 of 164
==8206==    at 0x4A079C7: operator new(unsigned long) (vg_replace_malloc.c:220)
==8206==    by 0x4DB7A7E: llvm::SmallVectorBase::grow_pod(unsigned long, unsigned long) (in /home/edwin/clam/git/builds/defaul
t/libclamav/.libs/libclamav.so.6.1.0)
==8206==    by 0x4F90382: llvm::VNInfo::addKill(llvm::SlotIndex) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libcl
amav.so.6.1.0)
==8206==    by 0x5126B5C: llvm::LiveIntervals::handleVirtualRegisterDef(llvm::MachineBasicBlock*, llvm::ilist_iterator<llvm::M
achineInstr>, llvm::SlotIndex, llvm::MachineOperand&, unsigned int, llvm::LiveInterval&) (in /home/edwin/clam/git/builds/defau
lt/libclamav/.libs/libclamav.so.6.1.0)
==8206==    by 0x512725E: llvm::LiveIntervals::handleRegisterDef(llvm::MachineBasicBlock*, llvm::ilist_iterator<llvm::MachineI
nstr>, llvm::SlotIndex, llvm::MachineOperand&, unsigned int) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav
.so.6.1.0)
==8206==    by 0x51278A8: llvm::LiveIntervals::computeIntervals() (in /home/edwin/clam/git/builds/default/libclamav/.libs/libc
lamav.so.6.1.0)
==8206==    by 0x5127CB4: llvm::LiveIntervals::runOnMachineFunction(llvm::MachineFunction&) (in /home/edwin/clam/git/builds/de
fault/libclamav/.libs/libclamav.so.6.1.0)
==8206==    by 0x4DAE935: llvm::FPPassManager::runOnFunction(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclama
v/.libs/libclamav.so.6.1.0)
==8206==    by 0x4DAEB10: llvm::FunctionPassManagerImpl::run(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclama
v/.libs/libclamav.so.6.1.0)
==8206==    by 0x4DAED3D: llvm::FunctionPassManager::run(llvm::Function&) (in /home/edwin/clam/git/builds/default/libclamav/.l
ibs/libclamav.so.6.1.0)
==8206==    by 0x4D8BE8E: llvm::JIT::runJITOnFunctionUnlocked(llvm::Function*, llvm::MutexGuard const&) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav.so.6.1.0)
==8206==    by 0x4D8CA72: llvm::JIT::getPointerToFunction(llvm::Function*) (in /home/edwin/clam/git/builds/default/libclamav/.libs/libclamav.so.6.1.0)

llvm-svn: 99400

llvm-svn: 98686

cl = EXTRACT_SUBREG reg1024, 1, is overly conservative. It should check
for overlaps of vr's live interval with the super registers of the
physical register (ECX in this case) and let JoinIntervals() handle checking
the coalescing feasibility against the physical register (cl in this case).

llvm-svn: 98251

I'll get this loop right yet.

llvm-svn: 98155

Don't accidentally produce unspillable intervals for deeply nested loops.

llvm-svn: 97496

Previously, LiveIntervalAnalysis would infer phi joins by looking for multiply
defined registers. That doesn't work if the phi join is implicitly defined in
all but one of the predecessors.

llvm-svn: 96994

Moderate the weight given to very small intervals.

The spill weight given to new intervals created when spilling was not
normalized in the same way as the original spill weights calculated by
CalcSpillWeights. That meant that restored registers would tend to hang around
because they had a much higher spill weight that unspilled registers.

This improves the runtime of a few tests by up to 10%, and there are no
significant regressions.

llvm-svn: 96613

changed its behavior.  Oops.

llvm-svn: 95811

llvm-svn: 95749

register coalescing.  This fixes many crashes and
places where debug info affects codegen (when
dbg.value is lowered to machine instructions, which
it isn't yet in TOT).

llvm-svn: 95739

into TargetOpcodes.h.  #include the new TargetOpcodes.h
into MachineInstr.  Add new inline accessors (like isPHI())
to MachineInstr, and start using them throughout the 
codebase.

llvm-svn: 95687

only run for x86 with fastisel. I've found it being very effective in
eliminating some obvious dead code as result of formal parameter lowering
especially when tail call optimization eliminated the need for some of the loads
from fixed frame objects. It also shrinks a number of the tests. A couple of
tests no longer make sense and are now eliminated.

llvm-svn: 95493

this makes the code work transparently the same
whether they're there or not.

llvm-svn: 94240

Change errs() to dbgs().

llvm-svn: 92529

This fixes an in-place update bug where code inserted at the end of basic blocks may not be covered by existing intervals which were live across the entire block. It is also consistent with the way ranges are specified for live intervals.

llvm-svn: 91859

Tail duplication produces lots of identical phi nodes in different basic
blocks. Teach PHIElimination to reuse the join registers when lowering a phi
node that is identical to an already lowered node. This saves virtual
registers, and more importantly it avoids creating copies the the coalescer
doesn't know how to eliminate.

Teach LiveIntervalAnalysis about the phi joins with multiple uses.

This patch significantly reduces code size produced by -pre-regalloc-taildup.

llvm-svn: 91549

llvm-svn: 91103

The coalescer is supposed to clean these up, but when setting up parameters
for a function call, there may be copies to physregs. If the defining
instruction has been LICM'ed far away, the coalescer won't touch it.

The register allocation hint does not always work - when the register
allocator is backtracking, it clears the hints.

This patch is more conservative than r90502, and does not break
483.xalancbmk/i686. It still breaks the PowerPC bootstrap, so it is disabled
by default, and can be enabled with the -trivial-coalesce-ends option.

llvm-svn: 91049

When a call is placed to spill an interval this spiller will first try to
break the interval up into its component values. Single value intervals and
intervals which have already been split (or are the result of previous splits)
are spilled by the default spiller.

Splitting intervals as described above may improve the performance of generated
code in some circumstances. This work is experimental however, and it still
miscompiles many benchmarks. It's not recommended for general use yet.

llvm-svn: 90951

llvm-svn: 90653

The coalescer is supposed to clean these up, but when setting up parameters
for a function call, there may be copies to physregs. If the defining
instruction has been LICM'ed far away, the coalescer won't touch it.

The register allocation hint does not always work - when the register
allocator is backtracking, it clears the hints.

This patch takes care of a few more cases that r90163 missed.

llvm-svn: 90502

llvm-svn: 90481

- A valno should be set HasRedefByEC if there is an early clobber def in the middle of its live ranges. It should not be set if the def of the valno is defined by an early clobber.
- If a physical register def is tied to an use and it's an early clobber, it just means the HasRedefByEC is set since it's still one continuous live range.
- Add a couple of missing checks for HasRedefByEC in the coalescer. In general, it should not coalesce a vr with a physical register if the physical register has a early clobber def somewhere. This is overly conservative but that's the price for using such a nasty inline asm "feature".

llvm-svn: 90269

New virtual registers created for spill intervals should inherit allocation hints from the original register.

This helps us avoid silly copies when rematting values that are copied to a physical register:

leaq	_.str44(%rip), %rcx
movq	%rcx, %rsi
call	_strcmp

becomes:

leaq	_.str44(%rip), %rsi
call	_strcmp

The coalescer will not touch the movq because that would tie down the physical register.

llvm-svn: 90163

llvm-svn: 89470

Fix debug code that assumes getBasicBlock never returns NULL.

llvm-svn: 89428

llvm-svn: 89240

llvm-svn: 86522

A non-identity copy cannot be coalesced when the phi join destination register
is live at the copy site.

Also verify the condition that the PHI join source register is only used in
the PHI join. Otherwise the coalescing is invalid.

llvm-svn: 86322

This introduces a new pass, SlotIndexes, which is responsible for numbering
instructions for register allocation (and other clients). SlotIndexes numbering
is designed to match the existing scheme, so this patch should not cause any
changes in the generated code.

For consistency, and to avoid naming confusion, LiveIndex has been renamed
SlotIndex.

The processImplicitDefs method of the LiveIntervals analysis has been moved
into its own pass so that it can be run prior to SlotIndexes. This was
necessary to match the existing numbering scheme.

llvm-svn: 85979

llvm-svn: 84597

llvm-svn: 84586

is trivially rematerializable and integrate it into
TargetInstrInfo::isTriviallyReMaterializable. This way, all places that
need to know whether an instruction is rematerializable will get the
same answer.

This enables the useful parts of the aggressive-remat option by
default -- using AliasAnalysis to determine whether a memory location
is invariant, and removes the questionable parts -- rematting operations
with virtual register inputs that may not be live everywhere.

llvm-svn: 83687

TargetInstrDesc::isRematerializable flag, so it isn't necessary to do
this check in its callers.

llvm-svn: 83671

teach it how to recognize invariant physical registers.

llvm-svn: 83476

llvm-svn: 83255

llvm-svn: 83254

llvm-svn: 82821

llvm-svn: 82812

 - Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
   This eliminates MachineInstr's std::list member and allows the data to be
   created by isel and live for the remainder of codegen, avoiding a lot of
   copying and unnecessary translation. This also shrinks MemSDNode.
 - Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
   fields for MachineMemOperands.
 - Change MemSDNode to have a MachineMemOperand member instead of its own
   fields with the same information. This introduces some redundancy, but
   it's more consistent with what MachineInstr will eventually want.
 - Ignore alignment when searching for redundant loads for CSE, but remember
   the greatest alignment.

Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.

llvm-svn: 82794