llvm-svn: 68603

with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.

This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.

Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.

Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.

Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.

Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.

llvm-svn: 68576

builds.

--- Reverse-merging (from foreign repository) r68552 into '.':
U    test/CodeGen/X86/tls8.ll
U    test/CodeGen/X86/tls10.ll
U    test/CodeGen/X86/tls2.ll
U    test/CodeGen/X86/tls6.ll
U    lib/Target/X86/X86Instr64bit.td
U    lib/Target/X86/X86InstrSSE.td
U    lib/Target/X86/X86InstrInfo.td
U    lib/Target/X86/X86RegisterInfo.cpp
U    lib/Target/X86/X86ISelLowering.cpp
U    lib/Target/X86/X86CodeEmitter.cpp
U    lib/Target/X86/X86FastISel.cpp
U    lib/Target/X86/X86InstrInfo.h
U    lib/Target/X86/X86ISelDAGToDAG.cpp
U    lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U    lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.cpp
U    lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U    lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U    lib/Target/X86/X86ISelLowering.h
U    lib/Target/X86/X86InstrInfo.cpp
U    lib/Target/X86/X86InstrBuilder.h
U    lib/Target/X86/X86RegisterInfo.td

llvm-svn: 68560

This introduces a small regression on the generated code
quality in the case we are just computing addresses, not
loading values.

Will work on it and on X86-64 support.

llvm-svn: 68552

movq for v2i64 on x86-32.

llvm-svn: 68368

llvm-svn: 68253

llvm-svn: 68133

When optimzing a mul by immediate into two, the resulting mul's should get a x86 specific node to avoid dag combiner from hacking on them further.

llvm-svn: 68066

llvm-svn: 67949

Optimize some 64-bit multiplication by constants into two lea's or one lea + shl since imulq is slow (latency 5). e.g.
x * 40
=>
shlq    $3, %rdi
leaq    (%rdi,%rdi,4), %rax

This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq    (%rdi,%rdi,2), %rax
leaq    (%rsi,%rax,8), %rax

llvm-svn: 67917

improve TLS support (see http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20090309/075220.html), but that code is VERY brittle.

This patch just makes it a bit more resistant.

llvm-svn: 67843

llvm-svn: 67784

llvm-svn: 67742

  %a = ...
  %b = and i32 %a, 2
  %c = srl i32 %b, 1
  %d = br i32 %c, 

into

  %a = ...
  %b = and %a, 2
  %c = X86ISD::CMP %b, 0
  %d = X86ISD::BRCOND %c ...

This applies only when the AND constant value has one bit set and the SRL
constant is equal to the log2 of the AND constant. The back-end is smart enough
to convert the result into a TEST/JMP sequence.

llvm-svn: 67728

instructions. Prevent that if we don't want implicit uses of SSE.

llvm-svn: 66877

Fix some significant problems with constant pools that resulted in unnecessary paddings between constant pool entries, larger than necessary alignments (e.g. 8 byte alignment for .literal4 sections), and potentially other issues.

1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.


Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.

llvm-svn: 66875

for i32/i64 expressions (we could also do i16 on cpus where
i16 lea is fast, but I didn't add this).  On the example, we now
generate:

_test:
	movl	4(%esp), %eax
	cmpl	$42, (%eax)
	setl	%al
	movzbl	%al, %eax
	leal	4(%eax,%eax,8), %eax
	ret

instead of:

_test:
	movl	4(%esp), %eax
	cmpl	$41, (%eax)
	movl	$4, %ecx
	movl	$13, %eax
	cmovg	%ecx, %eax
	ret

llvm-svn: 66869

example to:

_test:
	movl	4(%esp), %eax
	cmpl	$41, (%eax)
	setg	%al
	movzbl	%al, %eax
	orl	$4294967294, %eax
	ret

instead of:

        movl    4(%esp), %eax
        cmpl    $41, (%eax)
	movl	$4294967294, %ecx
	movl	$4294967295, %eax
	cmova	%ecx, %eax
	ret

which is smaller in code size and faster. rdar://6668608

llvm-svn: 66868

related transformations out of target-specific dag combine into the
ARM backend.  These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).

Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0  -> (zext(cond) << 3).  This happens frequently
with the recently added cp constant select optimization, but is a
very general xform.  For example, we now compile the second example
in const-select.ll to:

_test:
        movsd   LCPI2_0, %xmm0
        ucomisd 8(%esp), %xmm0
        seta    %al
        movzbl  %al, %eax
        movl    4(%esp), %ecx
        movsbl  (%ecx,%eax,4), %eax
        ret

instead of:

_test:
        movl    4(%esp), %eax
        leal    4(%eax), %ecx
        movsd   LCPI2_0, %xmm0
        ucomisd 8(%esp), %xmm0
        cmovbe  %eax, %ecx
        movsbl  (%ecx), %eax
        ret

This passes multisource and dejagnu.

llvm-svn: 66779

On x86, if the only use of a i64 load is a i64 store, generate a pair of double load and store instead.

llvm-svn: 66776

floating point instructions that are explicitly specified by the user.

llvm-svn: 66719

llvm-svn: 66684

llvm-svn: 66645

llvm-svn: 66642

the same say the "test" instruction does in overflow cases,
so eliminating the test is only safe when those bits aren't
needed, as is the case for COND_E and COND_NE, or if it
can be proven that no overflow will occur. For now, just
restrict the optimization to COND_E and COND_NE and don't
do any overflow analysis.

llvm-svn: 66318

The extra operand didn't appear to cause any trouble, but it was
erroneous regardless.

llvm-svn: 66206

negative one, as subtracts of immediates are canonicalized
to adds.

llvm-svn: 66180

llvm-svn: 66058

llvm-svn: 66008

result from add, sub, inc, and dec instructions in simple cases.

llvm-svn: 66004

 pic |  declaration | linkage  | visibility |

!pic |  declaration | external | default    | tls1.ll     tls2.ll     | local exec
 pic |  declaration | external | default    | tls1-pic.ll tls2-pic.ll | general dynamic
!pic | !declaration | external | default    | tls3.ll     tls4.ll     | initial exec
 pic | !declaration | external | default    | tls3-pic.ll tls4-pic.ll | general dynamic

!pic |  declaration | external | hidden     | tls7.ll     tls8.ll     | local exec
 pic |  declaration | external | hidden     | X                       | local dynamic
!pic | !declaration | external | hidden     | tls9.ll     tls10.ll    | local exec
 pic | !declaration | external | hidden     | X                       | local dynamic

!pic |  declaration | internal | default    | tls5.ll     tls6.ll     | local exec
 pic |  declaration | internal | default    | X                       | local dynamic

The ones marked with an X have not been implemented since local dynamic is not implemented.

llvm-svn: 65632

llvm-svn: 65482

llvm-svn: 65313

Generate better code for v16i8 shuffles on SSE2 (avoids stack)
Generate pshufb for v8i16 and v16i8 shuffles on SSSE3 where it is fewer uops.
Document the shuffle matching logic and add some FIXMEs for later further
  cleanups.
New tests that test the above.

Examples:

New:
_shuf2:
	pextrw	$7, %xmm0, %eax
	punpcklqdq	%xmm1, %xmm0
	pshuflw	$128, %xmm0, %xmm0
	pinsrw	$2, %eax, %xmm0

Old:
_shuf2:
	pextrw	$2, %xmm0, %eax
	pextrw	$7, %xmm0, %ecx
	pinsrw	$2, %ecx, %xmm0
	pinsrw	$3, %eax, %xmm0
	movd	%xmm1, %eax
	pinsrw	$4, %eax, %xmm0
	ret

=========

New:
_shuf4:
	punpcklqdq	%xmm1, %xmm0
	pshufb	LCPI1_0, %xmm0

Old:
_shuf4:
	pextrw	$3, %xmm0, %eax
	movsd	%xmm1, %xmm0
	pextrw	$3, %xmm1, %ecx
	pinsrw	$4, %ecx, %xmm0
	pinsrw	$5, %eax, %xmm0

========

New:
_shuf1:
	pushl	%ebx
	pushl	%edi
	pushl	%esi
	pextrw	$1, %xmm0, %eax
	rolw	$8, %ax
	movd	%xmm0, %ecx
	rolw	$8, %cx
	pextrw	$5, %xmm0, %edx
	pextrw	$4, %xmm0, %esi
	pextrw	$3, %xmm0, %edi
	pextrw	$2, %xmm0, %ebx
	movaps	%xmm0, %xmm1
	pinsrw	$0, %ecx, %xmm1
	pinsrw	$1, %eax, %xmm1
	rolw	$8, %bx
	pinsrw	$2, %ebx, %xmm1
	rolw	$8, %di
	pinsrw	$3, %edi, %xmm1
	rolw	$8, %si
	pinsrw	$4, %esi, %xmm1
	rolw	$8, %dx
	pinsrw	$5, %edx, %xmm1
	pextrw	$7, %xmm0, %eax
	rolw	$8, %ax
	movaps	%xmm1, %xmm0
	pinsrw	$7, %eax, %xmm0
	popl	%esi
	popl	%edi
	popl	%ebx
	ret

Old:
_shuf1:
	subl	$252, %esp
	movaps	%xmm0, (%esp)
	movaps	%xmm0, 16(%esp)
	movaps	%xmm0, 32(%esp)
	movaps	%xmm0, 48(%esp)
	movaps	%xmm0, 64(%esp)
	movaps	%xmm0, 80(%esp)
	movaps	%xmm0, 96(%esp)
	movaps	%xmm0, 224(%esp)
	movaps	%xmm0, 208(%esp)
	movaps	%xmm0, 192(%esp)
	movaps	%xmm0, 176(%esp)
	movaps	%xmm0, 160(%esp)
	movaps	%xmm0, 144(%esp)
	movaps	%xmm0, 128(%esp)
	movaps	%xmm0, 112(%esp)
	movzbl	14(%esp), %eax
	movd	%eax, %xmm1
	movzbl	22(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm1, %xmm2
	movzbl	42(%esp), %eax
	movd	%eax, %xmm1
	movzbl	50(%esp), %eax
	movd	%eax, %xmm3
	punpcklbw	%xmm1, %xmm3
	punpcklbw	%xmm2, %xmm3
	movzbl	77(%esp), %eax
	movd	%eax, %xmm1
	movzbl	84(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm1, %xmm2
	movzbl	104(%esp), %eax
	movd	%eax, %xmm1
	punpcklbw	%xmm1, %xmm0
	punpcklbw	%xmm2, %xmm0
	movaps	%xmm0, %xmm1
	punpcklbw	%xmm3, %xmm1
	movzbl	127(%esp), %eax
	movd	%eax, %xmm0
	movzbl	135(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm0, %xmm2
	movzbl	155(%esp), %eax
	movd	%eax, %xmm0
	movzbl	163(%esp), %eax
	movd	%eax, %xmm3
	punpcklbw	%xmm0, %xmm3
	punpcklbw	%xmm2, %xmm3
	movzbl	188(%esp), %eax
	movd	%eax, %xmm0
	movzbl	197(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm0, %xmm2
	movzbl	217(%esp), %eax
	movd	%eax, %xmm4
	movzbl	225(%esp), %eax
	movd	%eax, %xmm0
	punpcklbw	%xmm4, %xmm0
	punpcklbw	%xmm2, %xmm0
	punpcklbw	%xmm3, %xmm0
	punpcklbw	%xmm1, %xmm0
	addl	$252, %esp
	ret

llvm-svn: 65311

instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.

llvm-svn: 65296

llvm-svn: 65274

llvm-svn: 65152

(Note: Eventually, commits like this will be handled via a pre-commit hook that
 does this automagically, as well as expand tabs to spaces and look for 80-col
 violations.)

llvm-svn: 64827

llvm-svn: 64496

in inline asm as signed (what gcc does).  Add partial support
for x86-specific "e" and "Z" constraints, with appropriate
signedness for printing.

llvm-svn: 64400