mm to mm/m64 and the Move quadword from xmm2/mem64 to xmm1 had the incorrect
encodings.

llvm-svn: 102952

llvm-svn: 102199

llvm-svn: 99748

llvm-svn: 98531

pattern which is broken (source and address swapped).

llvm-svn: 97958

llvm-svn: 97348

then use it as an MMX register (!?).

llvm-svn: 96901

don't alis it in the MMX .td file with a different width,
split into two X86ISD opcodes.  This fixes an x86 testcase.

llvm-svn: 96859

TableGen fragment refactoring.

Move some utility TableGen defs, classes, etc. into a common file so
they may be used my multiple pattern files.  We will use this for
the AVX specification to help with the transition from the current
SSE specification.

llvm-svn: 95727

llvm-svn: 95435

the alignment allows.  Fixed a bug where we didn't use a
vector load/store for PR5626.

llvm-svn: 94338

X86 instruction tables.

Also (while I was at it) cleaned up the X86 tables, removing tabs and
80-line violations.

This patch was reviewed by Chris Lattner, but please let me know if
there are any problems.

* X86*.td
	Removed tabs and fixed 80-line violations

* X86Instr64bit.td
	(IRET, POPCNT, BT_, LSL, SWPGS, PUSH_S, POP_S, L_S, SMSW)
		Added
	(CALL, CMOV) Added qualifiers
	(JMP) Added PC-relative jump instruction
	(POPFQ/PUSHFQ) Added qualifiers; renamed PUSHFQ to indicate
		that it is 64-bit only (ambiguous since it has no
		REX prefix)
	(MOV) Added rr form going the other way, which is encoded
		differently
	(MOV) Changed immediates to offsets, which is more correct;
		also fixed MOV64o64a to have to a 64-bit offset
	(MOV) Fixed qualifiers
	(MOV) Added debug-register and condition-register moves
	(MOVZX) Added more forms
	(ADC, SUB, SBB, AND, OR, XOR) Added reverse forms, which
		(as with MOV) are encoded differently
	(ROL) Made REX.W required
	(BT) Uncommented mr form for disassembly only
	(CVT__2__) Added several missing non-intrinsic forms
	(LXADD, XCHG) Reordered operands to make more sense for
		MRMSrcMem
	(XCHG) Added register-to-register forms
	(XADD, CMPXCHG, XCHG) Added non-locked forms
* X86InstrSSE.td
	(CVTSS2SI, COMISS, CVTTPS2DQ, CVTPS2PD, CVTPD2PS, MOVQ)
		Added
* X86InstrFPStack.td
	(COM_FST0, COMP_FST0, COM_FI, COM_FIP, FFREE, FNCLEX, FNOP,
	 FXAM, FLDL2T, FLDL2E, FLDPI, FLDLG2, FLDLN2, F2XM1, FYL2X,
	 FPTAN, FPATAN, FXTRACT, FPREM1, FDECSTP, FINCSTP, FPREM,
	 FYL2XP1, FSINCOS, FRNDINT, FSCALE, FCOMPP, FXSAVE,
	 FXRSTOR)
		Added
	(FCOM, FCOMP) Added qualifiers
	(FSTENV, FSAVE, FSTSW) Fixed opcode names
	(FNSTSW) Added implicit register operand
* X86InstrInfo.td
	(opaque512mem) Added for FXSAVE/FXRSTOR
	(offset8, offset16, offset32, offset64) Added for MOV
	(NOOPW, IRET, POPCNT, IN, BTC, BTR, BTS, LSL, INVLPG, STR,
	 LTR, PUSHFS, PUSHGS, POPFS, POPGS, LDS, LSS, LES, LFS,
	 LGS, VERR, VERW, SGDT, SIDT, SLDT, LGDT, LIDT, LLDT,
	 LODSD, OUTSB, OUTSW, OUTSD, HLT, RSM, FNINIT, CLC, STC,
	 CLI, STI, CLD, STD, CMC, CLTS, XLAT, WRMSR, RDMSR, RDPMC,
	 SMSW, LMSW, CPUID, INVD, WBINVD, INVEPT, INVVPID, VMCALL,
	 VMCLEAR, VMLAUNCH, VMRESUME, VMPTRLD, VMPTRST, VMREAD,
	 VMWRITE, VMXOFF, VMXON) Added
	(NOOPL, POPF, POPFD, PUSHF, PUSHFD) Added qualifier
	(JO, JNO, JB, JAE, JE, JNE, JBE, JA, JS, JNS, JP, JNP, JL,
	 JGE, JLE, JG, JCXZ) Added 32-bit forms
	(MOV) Changed some immediate forms to offset forms
	(MOV) Added reversed reg-reg forms, which are encoded
		differently
	(MOV) Added debug-register and condition-register moves
	(CMOV) Added qualifiers
	(AND, OR, XOR, ADC, SUB, SBB) Added reverse forms, like MOV
	(BT) Uncommented memory-register forms for disassembler
	(MOVSX, MOVZX) Added forms
	(XCHG, LXADD) Made operand order make sense for MRMSrcMem
	(XCHG) Added register-register forms
	(XADD, CMPXCHG) Added unlocked forms
* X86InstrMMX.td
	(MMX_MOVD, MMV_MOVQ) Added forms
* X86InstrInfo.cpp: Changed PUSHFQ to PUSHFQ64 to reflect table
	change

* X86RegisterInfo.td: Added debug and condition register sets
* x86-64-pic-3.ll: Fixed testcase to reflect call qualifier
* peep-test-3.ll: Fixed testcase to reflect test qualifier
* cmov.ll: Fixed testcase to reflect cmov qualifier
* loop-blocks.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-11.ll: Fixed testcase to reflect call qualifier
* 2009-11-04-SubregCoalescingBug.ll: Fixed testcase to reflect call
  qualifier
* x86-64-pic-2.ll: Fixed testcase to reflect call qualifier
* live-out-reg-info.ll: Fixed testcase to reflect test qualifier
* tail-opts.ll: Fixed testcase to reflect call qualifiers
* x86-64-pic-10.ll: Fixed testcase to reflect call qualifier
* bss-pagealigned.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-1.ll: Fixed testcase to reflect call qualifier
* widen_load-1.ll: Fixed testcase to reflect call qualifier

llvm-svn: 91638

bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.

llvm-svn: 85517

 - Used to mark fake instructions which don't correspond to an actual machine
   instruction (or are duplicates of a real instruction). This is to be used for
   "special cases" in the .td files, which should be ignored by things like the
   assembler and disassembler. We still need a good solution to handle pervasive
   duplication, like with the Int_ instructions.

 - Set the bit on fake "mov 0" style instructions, which allows turning an
   assembler matcher warning into a hard error.

 - -2 FIXMEs.

llvm-svn: 78731

No functional change.

llvm-svn: 78608

llvm-svn: 77978

llvm-svn: 77956

llvm-svn: 77944

Fixes PR4669

llvm-svn: 77940

llvm-svn: 76713

llvm-svn: 75142

instructions, which implies that there is an explicit memory operand.  There is
(however) no explicit memory operand; although this is a store, the only memory
operand is implicit, indicated by DS:EDI.  This causes the table-generation code
for the disassembler to report an error."

Patch by Sean Callanan!

llvm-svn: 73989

nodes for vectors with an i16 element type.  Add an optimization for 
building a vector which is all zeros/undef except for the bottom 
element, where the bottom element is an i8 or i16.

llvm-svn: 72988

llvm-svn: 72985

llvm-svn: 72817

llvm-svn: 72808

the Intel manual (screenshot) says it should be 0b11110110 (f6).  The existing
encoding causes a disassembly conflict with MMX_PAVGBrm, which really should be
0f e0."

Patch by Sean Callanan!

llvm-svn: 72508

PR2957

ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask.  A value of -1 represents UNDEF.

In addition to eliminating the creation of illegal BUILD_VECTORS just to 
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.

llvm-svn: 70225

llvm-svn: 69967

ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask.  A value of -1 represents UNDEF.

In addition to eliminating the creation of illegal BUILD_VECTORS just to 
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.

A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.

llvm-svn: 69952

llvm-svn: 65313

Added support for TRUNC v8i16 to v8i8 for X86 (MMX)

llvm-svn: 60916

llvm-svn: 60499

llvm-svn: 60487

llvm-svn: 58752

SSE2 registers as well as the MMX registers.

llvm-svn: 55436

llvm-svn: 55318

instructions on having SSE2.

llvm-svn: 55317

Is there way to avoid explicit target check?

llvm-svn: 55238

llvm-svn: 54026