over its USES.  If it's dead it doesn't have any uses!  :)

Thanks to the fabulous and mysterious Bill Wendling for pointing this out.  :)

llvm-svn: 13102

types in them.  Instead of creating an induction variable for all types, it
creates a single induction variable and casts to the other sizes.  This generates
this code:

no_exit:                ; preds = %entry, %no_exit
        %indvar = phi uint [ %indvar.next, %no_exit ], [ 0, %entry ]            ; <uint> [#uses=4]
***     %j.0.0 = cast uint %indvar to short             ; <short> [#uses=1]
        %indvar = cast uint %indvar to int              ; <int> [#uses=1]
        %tmp.7 = getelementptr short* %P, uint %indvar          ; <short*> [#uses=1]
        store short %j.0.0, short* %tmp.7
        %inc.0 = add int %indvar, 1             ; <int> [#uses=2]
        %tmp.2 = setlt int %inc.0, %N           ; <bool> [#uses=1]
        %indvar.next = add uint %indvar, 1              ; <uint> [#uses=1]
        br bool %tmp.2, label %no_exit, label %loopexit

instead of:

no_exit:                ; preds = %entry, %no_exit
        %indvar = phi ushort [ %indvar.next, %no_exit ], [ 0, %entry ]          ; <ushort> [#uses=2]
***     %indvar = phi uint [ %indvar.next, %no_exit ], [ 0, %entry ]            ; <uint> [#uses=3]
        %indvar = cast uint %indvar to int              ; <int> [#uses=1]
        %indvar = cast ushort %indvar to short          ; <short> [#uses=1]
        %tmp.7 = getelementptr short* %P, uint %indvar          ; <short*> [#uses=1]
        store short %indvar, short* %tmp.7
        %inc.0 = add int %indvar, 1             ; <int> [#uses=2]
        %tmp.2 = setlt int %inc.0, %N           ; <bool> [#uses=1]
        %indvar.next = add uint %indvar, 1
***     %indvar.next = add ushort %indvar, 1
        br bool %tmp.2, label %no_exit, label %loopexit

This is an improvement in register pressure, but probably doesn't happen that
often.

The more important fix will be to get rid of the redundant add.

llvm-svn: 13101

Eventually it would be nice if CallGraph maintained an ilist of CallGraphNode's instead
of a vector of pointers to them, but today is not that day.

llvm-svn: 13100

llvm-svn: 13091

llvm-svn: 13089

is done, which avoids invalidating iterators in the SCC traversal routines

llvm-svn: 13088

llvm-svn: 13081

llvm-svn: 13080

but it's a start, and seems to do it's basic job.

llvm-svn: 13068

llvm-svn: 13057

llvm-svn: 13051

llvm-svn: 13048

llvm-svn: 13046

structure to being dynamically computed on demand.  This makes updating
loop information MUCH easier.

llvm-svn: 13045

llvm-svn: 13040

that the exit block of the loop becomes the new entry block of the function.

This was causing a verifier assertion on 252.eon.

llvm-svn: 13039

using instructions inside of the loop.  This should fix the MishaTest failure
from last night.

llvm-svn: 13038

block.  The primary motivation for doing this is that we can now unroll nested loops.

This makes a pretty big difference in some cases.  For example, in 183.equake,
we are now beating the native compiler with the CBE, and we are a lot closer
with LLC.

I'm now going to play around a bit with the unroll factor and see what effect
it really has.

llvm-svn: 13034

While we're at it, add support for updating loop information correctly.

llvm-svn: 13033

limited.  Even in it's extremely simple state (it can only *fully* unroll single
basic block loops that execute a constant number of times), it already helps improve
performance a LOT on some benchmarks, particularly with the native code generators.

llvm-svn: 13028

llvm-svn: 13025

exit values.

llvm-svn: 13018

(familiar) function:

int _strlen(const char *str) {
    int len = 0;
    while (*str++) len++;
    return len;
}

And transforming it to use a ulong induction variable, because the type of
the pointer index was left as a constant long.  This is obviously very bad.

The fix is to shrink long constants in getelementptr instructions to intptr_t,
making the indvars pass insert a uint induction variable, which is much more
efficient.

Here's the before code for this function:

int %_strlen(sbyte* %str) {
entry:
        %tmp.13 = load sbyte* %str              ; <sbyte> [#uses=1]
        %tmp.24 = seteq sbyte %tmp.13, 0                ; <bool> [#uses=1]
        br bool %tmp.24, label %loopexit, label %no_exit

no_exit:                ; preds = %entry, %no_exit
***     %indvar = phi uint [ %indvar.next, %no_exit ], [ 0, %entry ]            ; <uint> [#uses=2]
***     %indvar = phi ulong [ %indvar.next, %no_exit ], [ 0, %entry ]           ; <ulong> [#uses=2]
        %indvar1 = cast ulong %indvar to uint           ; <uint> [#uses=1]
        %inc.02.sum = add uint %indvar1, 1              ; <uint> [#uses=1]
        %inc.0.0 = getelementptr sbyte* %str, uint %inc.02.sum          ; <sbyte*> [#uses=1]
        %tmp.1 = load sbyte* %inc.0.0           ; <sbyte> [#uses=1]
        %tmp.2 = seteq sbyte %tmp.1, 0          ; <bool> [#uses=1]
        %indvar.next = add ulong %indvar, 1             ; <ulong> [#uses=1]
        %indvar.next = add uint %indvar, 1              ; <uint> [#uses=1]
        br bool %tmp.2, label %loopexit.loopexit, label %no_exit

loopexit.loopexit:              ; preds = %no_exit
        %indvar = cast uint %indvar to int              ; <int> [#uses=1]
        %inc.1 = add int %indvar, 1             ; <int> [#uses=1]
        ret int %inc.1

loopexit:               ; preds = %entry
        ret int 0
}


Here's the after code:

int %_strlen(sbyte* %str) {
entry:
        %inc.02 = getelementptr sbyte* %str, uint 1             ; <sbyte*> [#uses=1]
        %tmp.13 = load sbyte* %str              ; <sbyte> [#uses=1]
        %tmp.24 = seteq sbyte %tmp.13, 0                ; <bool> [#uses=1]
        br bool %tmp.24, label %loopexit, label %no_exit

no_exit:                ; preds = %entry, %no_exit
***     %indvar = phi uint [ %indvar.next, %no_exit ], [ 0, %entry ]            ; <uint> [#uses=3]
        %indvar = cast uint %indvar to int              ; <int> [#uses=1]
        %inc.0.0 = getelementptr sbyte* %inc.02, uint %indvar           ; <sbyte*> [#uses=1]
        %inc.1 = add int %indvar, 1             ; <int> [#uses=1]
        %tmp.1 = load sbyte* %inc.0.0           ; <sbyte> [#uses=1]
        %tmp.2 = seteq sbyte %tmp.1, 0          ; <bool> [#uses=1]
        %indvar.next = add uint %indvar, 1              ; <uint> [#uses=1]
        br bool %tmp.2, label %loopexit, label %no_exit

loopexit:               ; preds = %entry, %no_exit
        %len.0.1 = phi int [ 0, %entry ], [ %inc.1, %no_exit ]          ; <int> [#uses=1]
        ret int %len.0.1
}

llvm-svn: 13016

the trip count for the loop, insert one so that we can canonicalize the exit
condition.

llvm-svn: 13015

llvm-svn: 13011

make the verifier more strict.  This fixes building zlib

llvm-svn: 13002

Debian.)

llvm-svn: 12986

llvm-svn: 12980

Basically we were using SimplifyCFG as a huge sledgehammer for a simple
optimization.  Because simplifycfg does so many things, we can't use it
for this purpose.

llvm-svn: 12977

the back-edge block, we must check the preincremented value.

llvm-svn: 12968

Instead of producing code like this:

Loop:
  X = phi 0, X2
  ...

  X2 = X + 1
  if (X != N-1) goto Loop

We now generate code that looks like this:

Loop:
  X = phi 0, X2
  ...

  X2 = X + 1
  if (X2 != N) goto Loop

This has two big advantages:
  1. The trip count of the loop is now explicit in the code, allowing
     the direct implementation of Loop::getTripCount()
  2. This reduces register pressure in the loop, and allows X and X2 to be
     put into the same register.

As a consequence of the second point, the code we generate for loops went
from:

.LBB2:  # no_exit.1
	...
        mov %EDI, %ESI
        inc %EDI
        cmp %ESI, 2
        mov %ESI, %EDI
        jne .LBB2 # PC rel: no_exit.1

To:

.LBB2:  # no_exit.1
	...
        inc %ESI
        cmp %ESI, 3
        jne .LBB2 # PC rel: no_exit.1

... which has two fewer moves, and uses one less register.

llvm-svn: 12961

llvm-svn: 12940

test/Regression/Transforms/SCCP/calltest.ll

llvm-svn: 12921

llvm-svn: 12919

llvm-svn: 12917

LoopSimplify was not updating dominator frontiers correctly in some cases.

llvm-svn: 12890

llvm-svn: 12888

This is fairly straight-forward, but was a real nightmare to get just
perfect.  aarg.  :)

llvm-svn: 12884

execute other CallGraphSCCPasses after the inliner without crashing.

llvm-svn: 12861

llvm-svn: 12858