configure

# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`

# CDPATH.
$as_unset CDPATH



  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line after each line using $LINENO; the second 'sed'
  # does the real work.  The second script uses 'N' to pair each
  # line-number line with the line containing $LINENO, and appends
  # trailing '-' during substitution so that $LINENO is not a special
  # case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # scripts with optimization help from Paolo Bonzini.  Blame Lee
  # E. McMahon (1931-1989) for sed's syntax.  :-)
  sed -n '
    p
    /[$]LINENO/=
  ' <$as_myself |
    sed '
      s/[$]LINENO.*/&-/
      t lineno
      b
      :lineno
      N
      :loop
      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
      t loop
      s/-\n.*//
    ' >$as_me.lineno &&
  chmod +x "$as_me.lineno" ||
    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] is not the place where we might find the
  # original and so on.  Autoconf is especially sensitive to this).
  . "./$as_me.lineno"
  # Exit status is that of the last command.
  exit
}


if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
  as_dirname=dirname
else
  as_dirname=false
fi

ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
  case `echo 'x\c'` in
  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
  *)   ECHO_C='\c';;
  esac;;
*)
  ECHO_N='-n';;
esac

if expr a : '\(a\)' >/dev/null 2>&1 &&
   test "X`expr 00001 : '.*\(...\)'`" = X001; then
  as_expr=expr
else
  as_expr=false
fi

rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
  rm -f conf$$.dir/conf$$.file
else
  rm -f conf$$.dir
  mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
  as_ln_s='ln -s'
  # ... but there are two gotchas:
  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
  # In both cases, we have to default to `cp -p'.
  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
    as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
  as_ln_s=ln
else
  as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null

if mkdir -p . 2>/dev/null; then
  as_mkdir_p=:
else
  test -d ./-p && rmdir ./-p
  as_mkdir_p=false
fi

# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
# systems may use methods other than mode bits to determine executability.
cat >conf$$.file <<_ASEOF
#! /bin/sh
exit 0
_ASEOF
chmod +x conf$$.file
if test -x conf$$.file >/dev/null 2>&1; then
  as_executable_p="test -x"
else
  as_executable_p=:
fi
rm -f conf$$.file

# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"


exec 6>&1

# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by LLVM $as_me 3.4svn, which was
generated by GNU Autoconf 2.60.  Invocation command line was

  CONFIG_FILES    = $CONFIG_FILES
  CONFIG_HEADERS  = $CONFIG_HEADERS
  CONFIG_LINKS    = $CONFIG_LINKS
  CONFIG_COMMANDS = $CONFIG_COMMANDS
  $ $0 $@

on `(hostname || uname -n) 2>/dev/null | sed 1q`
"

_ACEOF

cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
config_commands="$ac_config_commands"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.

Usage: $0 [OPTIONS] [FILE]...

  -h, --help       print this help, then exit
  -V, --version    print version number, then exit
  -q, --quiet      do not print progress messages
  -d, --debug      don't remove temporary files
      --recheck    update $as_me by reconfiguring in the same conditions
  --file=FILE[:TEMPLATE]
		   instantiate the configuration file FILE
  --header=FILE[:TEMPLATE]
		   instantiate the configuration header FILE

Configuration files:
$config_files

Configuration headers:
$config_headers

Configuration commands:
$config_commands

Report bugs to <bug-autoconf@gnu.org>."

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
LLVM config.status 3.4svn
configured by $0, generated by GNU Autoconf 2.60,
  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"

Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."

ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value.  By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
  case $1 in
  --*=*)
    ac_option=`expr "X$1" : 'X\([^=]*\)='`
    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
    ac_shift=:
    ;;
  *)
    ac_option=$1
    ac_optarg=$2
    ac_shift=shift
    ;;
  esac

  case $ac_option in
  # Handling of the options.
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    ac_cs_recheck=: ;;
  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
    echo "$ac_cs_version"; exit ;;
  --debug | --debu | --deb | --de | --d | -d )
    debug=: ;;
  --file | --fil | --fi | --f )
    $ac_shift
    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
    ac_need_defaults=false;;
  --header | --heade | --head | --hea )
    $ac_shift
    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
    ac_need_defaults=false;;
  --he | --h)
    # Conflict between --help and --header
    { echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; };;
  --help | --hel | -h )
    echo "$ac_cs_usage"; exit ;;
  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil | --si | --s)
    ac_cs_silent=: ;;

  # This is an error.
  -*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
   { (exit 1); exit 1; }; } ;;

  *) ac_config_targets="$ac_config_targets $1"
     ac_need_defaults=false ;;

  esac
  shift
done

ac_configure_extra_args=

if $ac_cs_silent; then
  exec 6>/dev/null
  ac_configure_extra_args="$ac_configure_extra_args --silent"
fi

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
  CONFIG_SHELL=$SHELL
  export CONFIG_SHELL
  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi

_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
exec 5>>config.log
{
  echo
  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
  echo "$ac_log"
} >&5

_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
#
# INIT-COMMANDS
#
llvm_src="${srcdir}"

_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF

# Handling of arguments.
for ac_config_target in $ac_config_targets
do
  case $ac_config_target in
    "include/llvm/Config/config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/config.h" ;;
    "include/llvm/Config/llvm-config.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Config/llvm-config.h" ;;
    "include/llvm/Config/Targets.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/Targets.def" ;;
    "include/llvm/Config/AsmPrinters.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/AsmPrinters.def" ;;
    "include/llvm/Config/AsmParsers.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/AsmParsers.def" ;;
    "include/llvm/Config/Disassemblers.def") CONFIG_FILES="$CONFIG_FILES include/llvm/Config/Disassemblers.def" ;;
    "include/llvm/Support/DataTypes.h") CONFIG_HEADERS="$CONFIG_HEADERS include/llvm/Support/DataTypes.h" ;;
    "Makefile.config") CONFIG_FILES="$CONFIG_FILES Makefile.config" ;;
    "llvm.spec") CONFIG_FILES="$CONFIG_FILES llvm.spec" ;;
    "docs/doxygen.cfg") CONFIG_FILES="$CONFIG_FILES docs/doxygen.cfg" ;;
    "tools/clang/${configh}") CONFIG_HEADERS="$CONFIG_HEADERS tools/clang/${configh}:${clang_src_root}/${configh}.in" ;;
    "tools/clang/${doxy}") CONFIG_FILES="$CONFIG_FILES tools/clang/${doxy}:${clang_src_root}/${doxy}.in" ;;
    "bindings/ocaml/llvm/META.llvm") CONFIG_FILES="$CONFIG_FILES bindings/ocaml/llvm/META.llvm" ;;
    "setup") CONFIG_COMMANDS="$CONFIG_COMMANDS setup" ;;
    "Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
    "Makefile.common") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile.common" ;;
    "examples/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS examples/Makefile" ;;
    "lib/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS lib/Makefile" ;;
    "runtime/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS runtime/Makefile" ;;
    "test/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile" ;;
    "test/Makefile.tests") CONFIG_COMMANDS="$CONFIG_COMMANDS test/Makefile.tests" ;;
    "unittests/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS unittests/Makefile" ;;
    "tools/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS tools/Makefile" ;;
    "utils/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS utils/Makefile" ;;
    "projects/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS projects/Makefile" ;;
    "bindings/Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS bindings/Makefile" ;;
    "bindings/ocaml/Makefile.ocaml") CONFIG_COMMANDS="$CONFIG_COMMANDS bindings/ocaml/Makefile.ocaml" ;;

  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
   { (exit 1); exit 1; }; };;
  esac
done


# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used.  Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi

# Have a temporary directory for convenience.  Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
  tmp=
  trap 'exit_status=$?
  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
  trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.

{
  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
  test -n "$tmp" && test -d "$tmp"
}  ||
{
  tmp=./conf$$-$RANDOM
  (umask 077 && mkdir "$tmp")
} ||
{
   echo "$me: cannot create a temporary directory in ." >&2
   { (exit 1); exit 1; }
}

#
# Set up the sed scripts for CONFIG_FILES section.
#

# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then

_ACEOF



ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  cat >conf$$subs.sed <<_ACEOF
SHELL!$SHELL$ac_delim
PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
PACKAGE_NAME!$PACKAGE_NAME$ac_delim
PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
PACKAGE_STRING!$PACKAGE_STRING$ac_delim
PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
exec_prefix!$exec_prefix$ac_delim
prefix!$prefix$ac_delim
program_transform_name!$program_transform_name$ac_delim
bindir!$bindir$ac_delim
sbindir!$sbindir$ac_delim
libexecdir!$libexecdir$ac_delim
datarootdir!$datarootdir$ac_delim
datadir!$datadir$ac_delim
sysconfdir!$sysconfdir$ac_delim
sharedstatedir!$sharedstatedir$ac_delim
localstatedir!$localstatedir$ac_delim
includedir!$includedir$ac_delim
oldincludedir!$oldincludedir$ac_delim
docdir!$docdir$ac_delim
infodir!$infodir$ac_delim
htmldir!$htmldir$ac_delim
dvidir!$dvidir$ac_delim
pdfdir!$pdfdir$ac_delim
psdir!$psdir$ac_delim
libdir!$libdir$ac_delim
localedir!$localedir$ac_delim
mandir!$mandir$ac_delim
DEFS!$DEFS$ac_delim
ECHO_C!$ECHO_C$ac_delim
ECHO_N!$ECHO_N$ac_delim
ECHO_T!$ECHO_T$ac_delim
LIBS!$LIBS$ac_delim
build_alias!$build_alias$ac_delim
host_alias!$host_alias$ac_delim
target_alias!$target_alias$ac_delim
LLVM_COPYRIGHT!$LLVM_COPYRIGHT$ac_delim
CC!$CC$ac_delim
CFLAGS!$CFLAGS$ac_delim
LDFLAGS!$LDFLAGS$ac_delim
CPPFLAGS!$CPPFLAGS$ac_delim
ac_ct_CC!$ac_ct_CC$ac_delim
EXEEXT!$EXEEXT$ac_delim
OBJEXT!$OBJEXT$ac_delim
CXX!$CXX$ac_delim
CXXFLAGS!$CXXFLAGS$ac_delim
ac_ct_CXX!$ac_ct_CXX$ac_delim
CPP!$CPP$ac_delim
subdirs!$subdirs$ac_delim
ENABLE_POLLY!$ENABLE_POLLY$ac_delim
LLVM_HAS_POLLY!$LLVM_HAS_POLLY$ac_delim
build!$build$ac_delim
build_cpu!$build_cpu$ac_delim
build_vendor!$build_vendor$ac_delim
build_os!$build_os$ac_delim
host!$host$ac_delim
host_cpu!$host_cpu$ac_delim
host_vendor!$host_vendor$ac_delim
host_os!$host_os$ac_delim
target!$target$ac_delim
target_cpu!$target_cpu$ac_delim
target_vendor!$target_vendor$ac_delim
target_os!$target_os$ac_delim
OS!$OS$ac_delim
HOST_OS!$HOST_OS$ac_delim
TARGET_OS!$TARGET_OS$ac_delim
LINKALL!$LINKALL$ac_delim
NOLINKALL!$NOLINKALL$ac_delim
LLVM_ON_UNIX!$LLVM_ON_UNIX$ac_delim
LLVM_ON_WIN32!$LLVM_ON_WIN32$ac_delim
ARCH!$ARCH$ac_delim
HOST_ARCH!$HOST_ARCH$ac_delim
ENDIAN!$ENDIAN$ac_delim
GREP!$GREP$ac_delim
EGREP!$EGREP$ac_delim
LLVM_CROSS_COMPILING!$LLVM_CROSS_COMPILING$ac_delim
BUILD_CC!$BUILD_CC$ac_delim
BUILD_EXEEXT!$BUILD_EXEEXT$ac_delim
BUILD_CXX!$BUILD_CXX$ac_delim
CVSBUILD!$CVSBUILD$ac_delim
ENABLE_LIBCPP!$ENABLE_LIBCPP$ac_delim
ENABLE_CXX11!$ENABLE_CXX11$ac_delim
ENABLE_SPLIT_DWARF!$ENABLE_SPLIT_DWARF$ac_delim
ENABLE_CLANG_ARCMT!$ENABLE_CLANG_ARCMT$ac_delim
ENABLE_CLANG_STATIC_ANALYZER!$ENABLE_CLANG_STATIC_ANALYZER$ac_delim
ENABLE_CLANG_REWRITER!$ENABLE_CLANG_REWRITER$ac_delim
ENABLE_OPTIMIZED!$ENABLE_OPTIMIZED$ac_delim
ENABLE_PROFILING!$ENABLE_PROFILING$ac_delim
DISABLE_ASSERTIONS!$DISABLE_ASSERTIONS$ac_delim
ENABLE_WERROR!$ENABLE_WERROR$ac_delim
ENABLE_EXPENSIVE_CHECKS!$ENABLE_EXPENSIVE_CHECKS$ac_delim
EXPENSIVE_CHECKS!$EXPENSIVE_CHECKS$ac_delim
DEBUG_RUNTIME!$DEBUG_RUNTIME$ac_delim
DEBUG_SYMBOLS!$DEBUG_SYMBOLS$ac_delim
KEEP_SYMBOLS!$KEEP_SYMBOLS$ac_delim
JIT!$JIT$ac_delim
_ACEOF

  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
    break
  elif $ac_last_try; then
    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
   { (exit 1); exit 1; }; }
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
  ac_eof=`expr $ac_eof + 1`
fi

cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
CEOF$ac_eof
_ACEOF


ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  cat >conf$$subs.sed <<_ACEOF
TARGET_HAS_JIT!$TARGET_HAS_JIT$ac_delim
ENABLE_DOCS!$ENABLE_DOCS$ac_delim
ENABLE_DOXYGEN!$ENABLE_DOXYGEN$ac_delim
LLVM_ENABLE_THREADS!$LLVM_ENABLE_THREADS$ac_delim
ENABLE_PTHREADS!$ENABLE_PTHREADS$ac_delim
LLVM_ENABLE_ZLIB!$LLVM_ENABLE_ZLIB$ac_delim
ENABLE_PIC!$ENABLE_PIC$ac_delim
ENABLE_SHARED!$ENABLE_SHARED$ac_delim
ENABLE_EMBED_STDCXX!$ENABLE_EMBED_STDCXX$ac_delim
ENABLE_TIMESTAMPS!$ENABLE_TIMESTAMPS$ac_delim
ENABLE_BACKTRACES!$ENABLE_BACKTRACES$ac_delim
TARGETS_TO_BUILD!$TARGETS_TO_BUILD$ac_delim
LLVM_ENUM_TARGETS!$LLVM_ENUM_TARGETS$ac_delim
LLVM_ENUM_ASM_PRINTERS!$LLVM_ENUM_ASM_PRINTERS$ac_delim
LLVM_ENUM_ASM_PARSERS!$LLVM_ENUM_ASM_PARSERS$ac_delim
LLVM_ENUM_DISASSEMBLERS!$LLVM_ENUM_DISASSEMBLERS$ac_delim
OPTIMIZE_OPTION!$OPTIMIZE_OPTION$ac_delim
EXTRA_OPTIONS!$EXTRA_OPTIONS$ac_delim
EXTRA_LD_OPTIONS!$EXTRA_LD_OPTIONS$ac_delim
CLANG_SRC_ROOT!$CLANG_SRC_ROOT$ac_delim
BINUTILS_INCDIR!$BINUTILS_INCDIR$ac_delim
INTERNAL_PREFIX!$INTERNAL_PREFIX$ac_delim
NM!$NM$ac_delim
ifGNUmake!$ifGNUmake$ac_delim
LN_S!$LN_S$ac_delim
CMP!$CMP$ac_delim
CP!$CP$ac_delim
DATE!$DATE$ac_delim
FIND!$FIND$ac_delim
MKDIR!$MKDIR$ac_delim
MV!$MV$ac_delim
RANLIB!$RANLIB$ac_delim
AR!$AR$ac_delim
RM!$RM$ac_delim
SED!$SED$ac_delim
TAR!$TAR$ac_delim
BINPWD!$BINPWD$ac_delim
GRAPHVIZ!$GRAPHVIZ$ac_delim
DOT!$DOT$ac_delim
FDP!$FDP$ac_delim
NEATO!$NEATO$ac_delim
TWOPI!$TWOPI$ac_delim
CIRCO!$CIRCO$ac_delim
GV!$GV$ac_delim
DOTTY!$DOTTY$ac_delim
XDOT_PY!$XDOT_PY$ac_delim
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
BZIP2!$BZIP2$ac_delim
CAT!$CAT$ac_delim
DOXYGEN!$DOXYGEN$ac_delim
GROFF!$GROFF$ac_delim
GZIPBIN!$GZIPBIN$ac_delim
PDFROFF!$PDFROFF$ac_delim
ZIP!$ZIP$ac_delim
OCAMLC!$OCAMLC$ac_delim
OCAMLOPT!$OCAMLOPT$ac_delim
OCAMLDEP!$OCAMLDEP$ac_delim
OCAMLDOC!$OCAMLDOC$ac_delim
GAS!$GAS$ac_delim
HAVE_LINK_VERSION_SCRIPT!$HAVE_LINK_VERSION_SCRIPT$ac_delim
INSTALL_LTDL_TRUE!$INSTALL_LTDL_TRUE$ac_delim
INSTALL_LTDL_FALSE!$INSTALL_LTDL_FALSE$ac_delim
CONVENIENCE_LTDL_TRUE!$CONVENIENCE_LTDL_TRUE$ac_delim
CONVENIENCE_LTDL_FALSE!$CONVENIENCE_LTDL_FALSE$ac_delim
LIBADD_DL!$LIBADD_DL$ac_delim
NO_VARIADIC_MACROS!$NO_VARIADIC_MACROS$ac_delim
NO_MISSING_FIELD_INITIALIZERS!$NO_MISSING_FIELD_INITIALIZERS$ac_delim
COVERED_SWITCH_DEFAULT!$COVERED_SWITCH_DEFAULT$ac_delim
NO_MAYBE_UNINITIALIZED!$NO_MAYBE_UNINITIALIZED$ac_delim
NO_UNINITIALIZED!$NO_UNINITIALIZED$ac_delim
PYTHON!$PYTHON$ac_delim
USE_UDIS86!$USE_UDIS86$ac_delim
USE_OPROFILE!$USE_OPROFILE$ac_delim
USE_INTEL_JITEVENTS!$USE_INTEL_JITEVENTS$ac_delim
XML2CONFIG!$XML2CONFIG$ac_delim
LIBXML2_LIBS!$LIBXML2_LIBS$ac_delim
LIBXML2_INC!$LIBXML2_INC$ac_delim
CXXCPP!$CXXCPP$ac_delim
HAVE_PTHREAD!$HAVE_PTHREAD$ac_delim
HAVE_LIBZ!$HAVE_LIBZ$ac_delim
HUGE_VAL_SANITY!$HUGE_VAL_SANITY$ac_delim
MMAP_FILE!$MMAP_FILE$ac_delim
SHLIBEXT!$SHLIBEXT$ac_delim
SHLIBPATH_VAR!$SHLIBPATH_VAR$ac_delim
LLVM_PREFIX!$LLVM_PREFIX$ac_delim
LLVM_BINDIR!$LLVM_BINDIR$ac_delim
LLVM_DATADIR!$LLVM_DATADIR$ac_delim
LLVM_DOCSDIR!$LLVM_DOCSDIR$ac_delim
LLVM_ETCDIR!$LLVM_ETCDIR$ac_delim
LLVM_INCLUDEDIR!$LLVM_INCLUDEDIR$ac_delim
LLVM_INFODIR!$LLVM_INFODIR$ac_delim
LLVM_MANDIR!$LLVM_MANDIR$ac_delim
LLVM_CONFIGTIME!$LLVM_CONFIGTIME$ac_delim
BINDINGS_TO_BUILD!$BINDINGS_TO_BUILD$ac_delim
ALL_BINDINGS!$ALL_BINDINGS$ac_delim
_ACEOF

  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
    break
  elif $ac_last_try; then
    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
   { (exit 1); exit 1; }; }
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
  ac_eof=`expr $ac_eof + 1`
fi

cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
CEOF$ac_eof
_ACEOF


ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
  cat >conf$$subs.sed <<_ACEOF
OCAML_LIBDIR!$OCAML_LIBDIR$ac_delim
ENABLE_VISIBILITY_INLINES_HIDDEN!$ENABLE_VISIBILITY_INLINES_HIDDEN$ac_delim
RPATH!$RPATH$ac_delim
RDYNAMIC!$RDYNAMIC$ac_delim
program_prefix!$program_prefix$ac_delim
LIBOBJS!$LIBOBJS$ac_delim
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF

  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 7; then
    break
  elif $ac_last_try; then
    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
   { (exit 1); exit 1; }; }
  else
    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
  fi
done

ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
  ac_eof=`expr $ac_eof + 1`
fi

cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
:end
s/|#_!!_#|//g
CEOF$ac_eof
_ACEOF


# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/
s/:*\${srcdir}:*/:/
s/:*@srcdir@:*/:/
s/^\([^=]*=[	 ]*\):*/\1/
s/:*$//
s/^[^=]*=[	 ]*$//
}'
fi

cat >>$CONFIG_STATUS <<\_ACEOF
fi # test -n "$CONFIG_FILES"


for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
echo "$as_me: error: Invalid tag $ac_tag." >&2;}
   { (exit 1); exit 1; }; };;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
echo "$as_me: error: cannot find input file: $ac_f" >&2;}
   { (exit 1); exit 1; }; };;
      esac
      ac_file_inputs="$ac_file_inputs $ac_f"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input="Generated from "`IFS=:
	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { echo "$as_me:$LINENO: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
    fi

    case $ac_tag in
    *:-:* | *:-) cat >"$tmp/stdin";;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  { as_dir="$ac_dir"
  case $as_dir in #(
  -*) as_dir=./$as_dir;;
  esac
  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
    as_dirs=
    while :; do
      case $as_dir in #(
      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
      *) as_qdir=$as_dir;;
      esac
      as_dirs="'$as_qdir' $as_dirs"
      as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
      test -d "$as_dir" && break
    done
    test -z "$as_dirs" || eval "mkdir $as_dirs"
  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
   { (exit 1); exit 1; }; }; }
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=

case `sed -n '/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p
' $ac_file_inputs` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
  ac_datarootdir_hack='
  s&@datadir@&$datadir&g
  s&@docdir@&$docdir&g
  s&@infodir@&$infodir&g
  s&@localedir@&$localedir&g
  s&@mandir@&$mandir&g
    s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF

# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF
  sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s&@configure_input@&$configure_input&;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&5
echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined." >&2;}

  rm -f "$tmp/stdin"
  case $ac_file in
  -) cat "$tmp/out"; rm -f "$tmp/out";;
  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
  esac
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
_ACEOF

# Transform confdefs.h into a sed script `conftest.defines', that
# substitutes the proper values into config.h.in to produce config.h.
rm -f conftest.defines conftest.tail
# First, append a space to every undef/define line, to ease matching.
echo 's/$/ /' >conftest.defines