Patch by David Abdurachmanov!

llvm-svn: 305123

Fixes embedded uses of llvm where google testing framework is provided outside.

llvm-svn: 305088

By default, CMake uses a 32-bit toolchain, even when on a 64-bit platform targeting a 64-bit build. However, due to the size of the binaries involved, this can cause linker instabilities (such as the linker running out of memory). Guide people to the correct solution to get CMake to use the native toolchain.

llvm-svn: 303912

Summary:
When apps or other libraries link against a library with symbol
versions, the version string is recorded in the import table, and used
at runtime to resolve the symbol back to a library that provides that
version (vaguely like how two-level namespaces work in Mach-O).  ld's
--default-symver flag tags every exported symbol with a symbol version
string equal to the library's soname.  Using --default-symver means
multiple versions of libLLVM can coexist within the same process, at
least to the extent that they don't try to pass data between each
other's llvms.

As an example, imagine a language like Rust using llvm for CPU codegen,
binding to OpenGL, with Mesa as the OpenGL implementation using llvm for
R600 codegen.  With --default-symver Rust and Mesa will resolve their
llvm usage to the version each was linked against, which need not match.

(Other ELF platforms like BSD and Solaris might have similar semantics,
I've not checked.)

This is based on an autoconf version of this patch by Adam Jackson.

This new option can be used to add --default-symver to the linker flags
for libLLVM.so.

Reviewers: beanz

Reviewed By: beanz

Subscribers: mgorny, llvm-commits

Differential Revision: https://reviews.llvm.org/D30997

llvm-svn: 302026

Summary:
VersionPrinter by default outputs information about the Host CPU
and Default target. Printing this information requires linking in
a large amount of data, such as supported target triples as C
strings, which in turn bloats the binary size.

Enable a new CMake option LLVM_VERSION_PRINTER_SHOW_HOST_TARGET_INFO
which controls printing of the host and target info. This allows
the target triple names to be dead-code stripped. This is a nice
win for LLVM clients that wish to minimize their binary size, such
as graphics drivers.

By default this is ON, so there is no change in the default behavior.
Clients who wish to suppress this printing can do so by setting this
option to off via CMake.

A test app on Linux that uses ParseCommandLineOptions() shows a binary
size reduction of 23KB (from 149K to 126K) for a Release build, and 24KB
(from 135K to 111K) in a MinSizeRel build.

Reviewers: klimek, beanz, bogner, chandlerc, compnerd

Reviewed By: compnerd

Patch by pammon (Peter Ammon) !

Subscribers: llvm-commits

Differential Revision: https://reviews.llvm.org/D30904

llvm-svn: 300630

This could be used to either disable the runtimes build altogether
or avoid building them but still generate the build targets.

Differential Revision: https://reviews.llvm.org/D31060

llvm-svn: 298653

When a python script is run, by default it creates the bytecode file if the directory is writable, and this ‘pollutes’ source folders.

From python's help:
-B Don’t write .py[co] files on import. See also PYTHONDONTWRITEBYTECODE.

Patch by Pere Mato (D30604)!

llvm-svn: 298603

CMake variable LLVM_DEFINITIONS collects preprocessor definitions provided
for host compiler that builds llvm components. A function
add_llvm_definitions was introduced in AddLLVMDefinitions.cmake to keep
track of these definitions and was intended to be a replacement for CMake
command add_definitions. Actually in many cases add_definitions is still
used and the content of LLVM_DEFINITIONS is not actual now. On the other
hand the current version of CMake allows getting set of definitions in a
more convenient way. This fix implements evaluation of the variable by
reading corresponding cmake property.

Differential Revision: https://reviews.llvm.org/D31125

llvm-svn: 298336

This is a follow-up to my change in r295090, which added support for
disabling these checks selectively based on setting the preprocessor
macro without relying on the Cmake setting. Swift has moved over to use
that approach, so we can clean up here and remove the Cmake setting.

https://reviews.llvm.org/D30578

llvm-svn: 297109

Summary:
'make srpm' or 'ninja srpm' will tar up the current source code and then
build a source RPM package.

By default it will use the llvm.spec file to generate the source RPM,
but you can specify your own custom spec file with the
LLVM_SRPM_USER_BINARY_SPECFILE option.  CMake will perform variable
substitution on your custom specfile, so you can reference CMake
variables in it.  For example:

Version:        @LLVM_RPM_SPEC_VERSION@

Note that everything in the source directory will be included in the
tarball so if you have a clang check out in tools/clang, then all
the clang source will end up in the tarball to.  It is recommended
to only use this build target with a clean source tree.

Reviewers: beanz

Reviewed By: beanz

Subscribers: mgorny, llvm-commits

Differential Revision: https://reviews.llvm.org/D30093

llvm-svn: 297007

To help assist in debugging ISEL or to prioritize GlobalISel backend
work, this patch adds two more tables to <Target>GenISelDAGISel.inc -
one which contains the patterns that are used during selection and the
other containing include source location of the patterns
Enabled through CMake varialbe LLVM_ENABLE_DAGISEL_COV

llvm-svn: 295081

This patch allows a user to specify a their own libtool instead of auto-detecting one.

llvm-svn: 294371

Moving the Ninja job pool configuration settings into the HandleLLVMOptions module will allow standalone builds of LLVM sub-projects to use the LLVM options without needing to re-implement them.

llvm-svn: 294334

In order to make sure that LLVM continues to work on machines that do not have the Universal CRT yet,
we'll need to ship a copy of UCRT in the Windows installation package. Fortunately, CMake 3.6+ already
supports app-local deployment of UCRT dlls, we just need to turn this on.

Differential Revision: https://reviews.llvm.org/D29146

llvm-svn: 293373

Now, GlobalISel will be built by default. To turn that off, one has to
use -DLLVM_BUILD_GLOBAL_ISEL=OFF on the cmake command line.

<rdar://problem/30004433>

llvm-svn: 293232

llvm-svn: 291815

compiler-rt uses it in its lit tests.

llvm-svn: 290357

I broke this in r288770.

llvm-svn: 288829

It is kinda crazy to have llvm/include and llvm/lib/Target in the include path for every tablegen invocation for every tablegen-like tool.

This patch removes those flags from the tablgen function that is called everywhere by instead creating a variable LLVM_TABLEGEN_FLAGS which is setup in the LLVM source directories.

This removes TableGen.cmake's dependency on LLVM_MAIN_SRC_DIR, and LLVM_MAIN_INCLUDE_DIR.

llvm-svn: 288770

Summary:
We recently introduced a feature that enforce at link-time that the
LLVM headers used by a clients are matching the ABI setting of the
LLVM library linked to.

However for clients that are using only headers from ADT and promise
they won't call into LLVM, this is forcing to link libSupport. This
new flag is intended to provide a way to configure LLVM with this
promise for such client.

Reviewers: bob.wilson, compnerd

Subscribers: mgorny, llvm-commits

Differential Revision: https://reviews.llvm.org/D27432

llvm-svn: 288754

Use Darwin libtool's -no_warning_for_no_symbols if available to silence the "has no symbols" link warning

Building compiler-rt on Darwin produces dozens of meaningless warnings about object files having no symbols during static archive creation. This is very intentional as compiler-rt uses #ifdefs to conditionally compile platform-specific code, and we even have a .cpp source file that only contains static asserts to make sure the environment is configured right. On Linux, this situation is fine and no warning is produced. This patch adds a libtool version detection and if it's new enough, we'll use the -no_warning_for_no_symbols flag that suppresses this warning. Build logs should be much cleaner now!

Differential Revision: https://reviews.llvm.org/D27119

llvm-svn: 288640

The macro LLVM_ENABLE_ABI_BREAKING_CHECKS is moved to a new header
abi-breaking.h, from llvm-config.h. Only headers that are using the
macro are including this new header.

LLVM will define a symbol, either EnableABIBreakingChecks or
DisableABIBreakingChecks depending on the configuration setting for
LLVM_ABI_BREAKING_CHECKS.

The abi-breaking.h header will add weak references to these symbols in
every clients that includes this header. This should ensure that
a mismatch triggers a link failure (or a load time failure for DSO).

On MSVC, the pragma "detect_mismatch" is used instead.

Differential Revision: https://reviews.llvm.org/D26876

llvm-svn: 288082

At the moment optimized tablegen is generated by LLVM_USE_HOST_TOOLS variable that is not set for Visual Sudio since LLVM_ENABLE_ASSERTIONS depends on CMAKE_BUILD_TYPE value that is not equal to "DEBUG" in case of Visual Studio soltion generation.

Modified to do not depend on LLVM_ENABLE_ASSERTIONS value in VS and Xcode cases

Reviewers: beanz

Subscribers: RKSimon, llvm-commits, mgorny

Differential Revision: https://reviews.llvm.org/D27135

llvm-svn: 288042

Summary: This should provide the function similar to `--disable-libedit` with the autotools build system, which seems to be missing from the commit (r200595) that adds this.

Reviewers: pcc, beanz

Subscribers: mgorny, llvm-commits

Differential Revision: https://reviews.llvm.org/D26550

llvm-svn: 287293

Summary:
The motivation for this is to enable correct detection of dlopen() on Android.
Android does not provide a static version of libdl, so if we add the -static flag
after performing the check, it will succeed even though subsequent link steps
will fail. With this change we correctly detect the absence of libdl in a
LLVM_BUILD_STATIC build on Android.

The link itself still does not succeed because the code does not check the result
of this check properly, but I plan to fix that in a separate change.

Reviewers: beanz

Subscribers: danalbert, mgorny, srhines, tberghammer, llvm-commits

Differential Revision: https://reviews.llvm.org/D26463

llvm-svn: 287220

This patch adds an option to the build system LLVM_DEPENDENCY_DEBUGGING. Over time I plan to extend this to do more complex verifications, but the initial patch causes compile errors wherever there is missing a dependency on intrinsics_gen.

Because intrinsics_gen is a compile-time dependency not a link-time dependency, everything that relies on the headers generated in intrinsics_gen needs an explicit dependency.

llvm-svn: 287207

llvm-svn: 286317

Summary:
This allows to have clang and llvm and the other subprojects
side-by-side instead of nested. This can be used with the monorepo or
multiple repos.

It will help having a single set of sources checked out but allows to
have a build directory with llvm and another one with llvm+clang.
Basically it abstracts LLVM_EXTERNAL_xxxx_SOURCE_DIR making it more
convenient by adopting a convention.

Reviewers: bogner, beanz, jlebar

Subscribers: mgorny, llvm-commits

Differential Revision: https://reviews.llvm.org/D26365

llvm-svn: 286162

This reverts commit r286123, accidentally commited while testing itself...

llvm-svn: 286124

Summary:
Some changes are made to cmake, especially the addition of a new
LLVM_ENABLE_PROJECTS option that makes the build system aware of
the monorepo directory structure.

Also a new script is added in llvm/utils/git-svn/. When present in
the $PATH, it enables a `git llvm` command. It is providing at this
point only the ability to push from the git monorepo: `git llvm push`.
It is intended to evolves with more features, for instance I plan on
features like `git llvm show r284955` to help working with sequential
revision numbers.
The push feature is taken from Justin Lebar's script available here:
https://github.com/jlebar/llvm-repo-tools/

Reviewers: jlebar

Subscribers: mgorny, modocache, llvm-commits

Differential Revision: https://reviews.llvm.org/D26334

llvm-svn: 286123

At least with cmake 3.6.1, the default build type setting was having no
effect; the generated CMakeCache.txt still had an empty CMAKE_BUILD_TYPE.
Force the variable to be set to achieve the desired behavior.

Differential Revision: https://reviews.llvm.org/D26200

llvm-svn: 285789

This patch was produced in conjunction with Michał Górny. It should resolve the issues that were trying to be solved by D25304.

This moves rpath handling into `llvm_add_library` and `add_llvm_executable` so that it is available to all projects using AddLLVM whether built in-tree or out-of-tree.

llvm-svn: 285714

This contains just enough for lib/Target/RISCV to compile. Notably a basic 
RISCVTargetMachine and RISCVTargetInfo. At this point you can attempt llc 
-march=riscv32 myinput.ll and will find it fails due to the lack of 
MCAsmInfo.

See http://lists.llvm.org/pipermail/llvm-dev/2016-August/103748.html for 
further discussion

Differential Revision: https://reviews.llvm.org/D23560

llvm-svn: 285712

The installhdrs target was inconsistently named and would behave
differently depending on whether or not you ran a build first. This
renames it to install-llvm-headers to match other target names and
adds a dependency on intrinsics_gen so that it will always install the
same set of things.

llvm-svn: 285035

Declare the LLVM_CMAKE_PATH to the source directory location of CMake
files, in order to make it possible to easily use them in subprojects.
Such a variable is already declared in most of LLVM projects
(and inconsistently mixed with direct source tree references), including
Clang, LLDB, compiler-rt, libcxx... Declaring it inside main LLVM tree
makes it possible to avoid having to declare fallback values or use
conditionals in those projects.

It should be noted that in some of the subprojects LLVM_CMAKE_PATH is
used to reference generated LLVMConfig.cmake file. However, these
references are conditional to stand-alone builds and explicitly
including this file is unnecessary in combined builds.

Differential Revision: https://reviews.llvm.org/D25724

llvm-svn: 284581

Differential Revision: https://reviews.llvm.org/D25354

llvm-svn: 283608

Hans reported an issue with r282510 on the list. This should resolve the issue.

llvm-svn: 282552

Support overriding the Doxygen & OCamldoc install directories,
and provide a more FHS-compliant defaults for both of them. This extends
r282240 that added this override for Sphinx-built documentation.

LLVM_INSTALL_DOXYGEN_HTML_DIR and LLVM_INSTALL_OCAMLDOC_HTML_DIR are
added, to control the location where Doxygen-generated and
OCamldoc-generated HTML docs are installed appropriately. They both
specify CMake-style install paths, and therefore can either by relative
to the install prefix or absolute.

The new defaults are subdirectories of share/doc/llvm, and replace
the previous directories of 'docs/html' and 'docs/ocaml/html' that
resulted in creating invalid '/usr/docs' that furthermore lacked proper
namespacing for the LLVM package. The new defaults are consistent with
the ones used for Sphinx HTML documentation, differing only in the last
component. Since the 'html' subdirectory is already used for Sphinx
docs, the 'doxygen-html' and 'ocaml-html' directories are used instead.

Differential Revision: https://reviews.llvm.org/D24935

llvm-svn: 282536

Summary:
The previous output was confusing as it would output "Taget triple:
x86_64-unknown-linux-gnu" even when LLVM_HOST_TRIPLE or
LLVM_DEFAULT_TARGET_TRIPLE were set on the CMake command line

Patch by: Alex Richardson!

Reviewers: beanz

Subscribers: Eugene.Zelenko

Differential Revision: https://reviews.llvm.org/D17067

llvm-svn: 282516

llvm-svn: 280746