Add the Lanai backend to lib/Target.

General Lanai backend discussion on llvm-dev thread "[RFC] Lanai backend" (http://lists.llvm.org/pipermail/llvm-dev/2016-February/095118.html).

Differential Revision: http://reviews.llvm.org/D17011

llvm-svn: 264578

llvm-svn: 264573

We require C++11 to build, so remove a few remaining preprocessor checks for
'__cplusplus >= 201103L'. This should always be true.

llvm-svn: 264572

This patch implements the following altivec instructions:

- Decimal Convert From/to National/Zoned/Signed-QWord:
    bcdcfn. bcdcfz. bcdctn. bcdctz. bcdcfsq. bcdctsq.

- Decimal Copy-Sign/Set-Sign:
    bcdcpsgn. bcdsetsgn.

- Decimal Shift/Unsigned-Shift/Shift-and-Round:
    bcds. bcdus. bcdsr.

- Decimal (Unsigned) Truncate:
    bcdtrunc. bcdutrunc.

Total 13 instructions

Thanks Amehsan's advice! Thanks Kit's great help!
Reviewers: hal, nemanja, kbarton, tjablin, amehsan

http://reviews.llvm.org/D17838

llvm-svn: 264568

[Power9] Implement new vsx instructions: insert, extract, test data class, min/max, reverse, permute, splat

This change implements the following vsx instructions:

- Scalar Insert/Extract
    xsiexpdp xsiexpqp xsxexpdp xsxsigdp xsxexpqp xsxsigqp

- Vector Insert/Extract
    xviexpdp xviexpsp xvxexpdp xvxexpsp xvxsigdp xvxsigsp
    xxextractuw xxinsertw

- Scalar/Vector Test Data Class
    xststdcdp xststdcsp xststdcqp
    xvtstdcdp xvtstdcsp

- Maximum/Minimum
    xsmaxcdp xsmaxjdp
    xsmincdp xsminjdp

- Vector Byte-Reverse/Permute/Splat
    xxbrd xxbrh xxbrq xxbrw
    xxperm xxpermr
    xxspltib

30 instructions

Thanks Nemanja for invaluable discussion! Thanks Kit's great help!
Reviewers: hal, nemanja, kbarton, tjablin, amehsan

http://reviews.llvm.org/D16842

llvm-svn: 264567

ICMP instruction selection fails on SKX and KNL for i1 operand.
I use XOR to resolve:
(A == B) is equivalent to (A xor B) == 0

Differential Revision: http://reviews.llvm.org/D18511

llvm-svn: 264566

This change implements the following vsx instructions:

- quad-precision move
    xscpsgnqp, xsabsqp, xsnegqp, xsnabsqp

- quad-precision fp-arithmetic
    xsaddqp(o) xsdivqp(o) xsmulqp(o) xssqrtqp(o) xssubqp(o)
    xsmaddqp(o) xsmsubqp(o) xsnmaddqp(o) xsnmsubqp(o)

22 instructions

Thanks Nemanja and Kit for careful review and invaluable discussion!
Reviewers: hal, nemanja, kbarton, tjablin, amehsan

http://reviews.llvm.org/D16110

llvm-svn: 264565

llvm-svn: 264561

When emitting coverage mappings for functions with local linkage and an
unknown filename, we use "<unknown>:func" for the PGO function name. The
problem is that we don't strip "<unknown>" from the name when loading
coverage data, like we do for other file names. Fix that and add a test.

llvm-svn: 264559

The caller of ValueEnumerator::EnumerateOperandType never sends in
metadata.  Assert that, and remove the unnecessary logic.

llvm-svn: 264558

Change writeFunctionMetadata to call writeMetadataRecords.  For now
there's no functionality change, but makes it easy to serialize other
types of metadata in the function block in the future.

llvm-svn: 264557

To match writeMetadataRecords, writeNamedMetadata and
writeMetadataStrings, change:

    WriteModuleMetadata        => writeModuleMetadata
    WriteFunctionLocalMetadata => writeFunctionMetadata
    Write##CLASS               => write##CLASS

The only major change is "FunctionLocal" => "Function".  The point is to
be less specific, in preparation for emitting normal metadata records
inside function metadata blocks (currently we only emit
`LocalAsMetadata` there).

llvm-svn: 264556

Besides being a nice cleanup, this is preparation for reusing the code
in function metadata blocks.

llvm-svn: 264555

Use an early return to simplify logic.

llvm-svn: 264554

make_unique => llvm::make_unique

llvm-svn: 264553

We don't really need a separate vector here; instead, point at a range
inside the main MDs array.  This matches how r264551 references the
ranges of strings and non-strings.

llvm-svn: 264552

Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.

Firstly, avoid splitting the big blob into multiple chunks of strings.

r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector.  The bug with that commit only reproduced
when there were more than "chunk-size" strings.  A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.

Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob.  Here's the layout:

    vbr6: # of strings
    vbr6: offset-to-blob
    blob:
       [vbr6]: string lengths
       [char]: concatenated strings

Secondly, make the output of llvm-bcanalyzer readable.

I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line.  Past a small number, the strings were
impossible to split in my head, and the lines were way too long.  This
version adds support in llvm-bcanalyzer for pretty-printing.

    <STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
      'abc'
      'def'
      'ghi'
    }

From the original commit:

Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.

llvm-svn: 264551

Split helper out of EmitRecordWithAbbrevImpl called emitBlob to reduce
code duplication, and add a few tests for it.

No functionality change intended.

llvm-svn: 264550

The implementation is fairly obvious.  This is preparation for using
some blobs in bitcode.

For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.

This isn't strictly necessary the two memory objects we have:

  - The return of RawMemoryObject::getPointer is valid until the memory
    object is destroyed.

  - StreamingMemoryObject::getPointer is valid until the next chunk is
    read from the stream.  Since the JumpToBit call is only going ahead
    to a word boundary, we'll never load another chunk.

However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.

I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.

llvm-svn: 264549

Change the filename to indicate this is a test, rename the tests, move
them into an anonymous namespace, and rename some variables.  All to
match our usual style before making further changes.

llvm-svn: 264548

Allow users of SimpleBitstreamCursor to limit the number of bytes
available to the cursor.  This is preparation for instantiating a cursor
that isn't allowed to load more bytes from a StreamingMemoryObject (just
move around the ones already-loaded).

llvm-svn: 264547

Add API to SimpleBitstreamCursor to allow users to translate between
byte addresses and pointers.

  - jumpToPointer: move the bit position to a particular pointer.
  - getPointerToByte: get the pointer for a particular byte.
  - getPointerToBit: get the pointer for the byte of the current bit.
  - getCurrentByteNo: convenience function for assertions and tests.

Mainly adds unit tests (getPointerToBit/Byte already has a use), but
also preparation for eventually using jumpToPointer.

llvm-svn: 264546

Split out SimpleBitstreamCursor from BitstreamCursor, which is a
lower-level cursor with no knowledge of bitcode blocks, abbreviations,
or records.  It just knows how to read bits and navigate the stream.

This is mainly organizational, to separate the API for manipulating raw
bits from that for bitcode concepts like Record and Block.

llvm-svn: 264545

This reverts commit c45f2afac5d6855a4804456a0f718563dc47ada0.

Looks like it may be causing a failure, I'll revert for now.

                 from
lib/CodeGen/AsmPrinter/DwarfDebug.cpp:14:
/usr/include/c++/4.9.2/bits/stl_pair.h: In instantiation of
                 'std::pair<_T1, _T2>& std::pair<_T1,
                 _T2>::operator=(const std::pair<_T1, _T2>&) [with _T1 =
                 std::unique_ptr<llvm::DwarfTypeUnit>; _T2 = const
                 llvm::DICompositeType*]':

/usr/include/c++/4.9.2/bits/stl_pair.h:160:8: error: use of deleted
function 'std::unique_ptr<_Tp, _Dp>& std::unique_ptr<_Tp,
_Dp>::operator=(const std::unique_ptr<_Tp, _Dp>&) [with _Tp =
llvm::DwarfTypeUnit; _Dp = std::default_delete<llvm::DwarfTypeUnit>]'
  first = __p.first;
        ^

llvm-svn: 264544

(which SimplifyCFG can produce...)

llvm-svn: 264543

llvm-svn: 264542

I tried to use isPodLike in:
  http://reviews.llvm.org/D18483

That failed because !is_class is too strict on platforms which don't yet
have is_trivially_copyable. This update tries to make isPodLike smarter
for platforms which don't have is_trivially_copyable, and AFAICT it
Should Just Work on all of them. I'll revert if the bots disagree with
me.

I'll also rename isPodLike to isTriviallyCopyable if this all works out,
since that's what the standard calls it now and one day we'll be rid of
isPodLike.

llvm-svn: 264541

Try to appease
http://bb.pgr.jp/builders/cmake-llvm-x86_64-linux/builds/34772. This was
the only check that didn't use DAG and it wasn't found.

llvm-svn: 264538

Summary:
Add a statistic to count the number of imported functions. Also, add a
new -print-imports option to emit a trace of imported functions, that
works even for an NDEBUG build.

Note that emitOptimizationRemark does not work for the above printing as
it expects a Function object and DebugLoc, neither of which we have
with summary-based importing.

This is part 2 of D18487, the first part was committed separately as
r264536.

Reviewers: joker.eph

Subscribers: llvm-commits, joker.eph

Differential Revision: http://reviews.llvm.org/D18487

llvm-svn: 264537

With r264503, aliases are now being added to the GlobalsToImport set
even when their aliasees can't be imported due to their linkage type.
While the importing worked correctly (the aliases imported as
declarations) due to the logic in doImportAsDefinition, there is no
point to adding them to the GlobalsToImport set.

Additionally, with D18487 it was resulting in incorrectly printing a
message indicating that the alias was imported.

To avoid this, delay adding aliases to the GlobalsToImport set until
after the linkage type of the aliasee is checked.

This patch is part of D18487.

llvm-svn: 264536

Intrinsic::maxnum and Intrinsic::minnum, along with the associated libc
function calls (fmax[f], etc.) generally map to function calls after lowering.
For some vector types with QPX at least, however, we can legally lower these,
and we don't need to prohibit CTR-based loops on their account.

It turned out, however, that the logic that checked the opcodes associated with
intrinsics was broken (it would set the Opcode variable, but that variable was
later checked only if set for some otherwise-external function call.

This fixes the latter problem and adds the FMAX/MINNUM mappings.

llvm-svn: 264532

Reject the following IR as malformed (assuming that %entry, %next are
not in a loop):

    next:
      %y = phi i32 [ 0, %entry ]
      %x = phi i32 [ %y, %entry ]

Such PHI nodes came up in PR26718. While there was no consensus on
whether or not this is valid IR, most opinions on that bug and in a
discussion on the llvm-dev mailing list tended towards a
"strict interpretation" (term by Joseph Tremoulet) of PHI node uses.
Also, the language reference explicitly states that "the use of each
incoming value is deemed to occur on the edge from the corresponding
predecessor block to the current block" and
`DominatorTree::dominates(Instruction*, Use&)` uses this definition as
well.

For the code mentioned in PR15384, clang does not compile to such PHIs
(anymore?). The test case still hangs when replacing `%tmp6` with `%tmp`
in revisions before r176366 (where PR15384 has been fixed). The
occurrence of %tmp6 therefore was probably unintentional. Its value is
not used except in other PHIs.

Reviewers: majnemer, reames, JosephTremoulet, bkramer, grosser, jdoerfert, kparzysz, sanjoy

Differential Revision: http://reviews.llvm.org/D18443

llvm-svn: 264528

llvm-svn: 264527

These are tests for store transforms. 
The loads, adds, and geps were irrelevant.

llvm-svn: 264526

If you're building dwps from other dwps, it can be hard to track down a
duplicate CU ID if it comes from two compilations of the same file in
different modes, etc. By including the .dwo path (which is hopefully
more unique than the file path) it can help track down where the
duplicates came from.

llvm-svn: 264520

Correct splitting of v8i32 vectors into v4i32 vectors to prevent scalarization

llvm-svn: 264517

This reverts commit fa36fcff16c7d4f78204d6296bf96c3558a4a672.

Causes the following Windows failure:

  C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\lib\CodeGen\MachineInstr.cpp(762):
  error C2338: must be trivially copyable to memmove

llvm-svn: 264516

Summary: isPodLike is as close as we have for is_trivially_copyable.

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D18483

llvm-svn: 264515

Correct splitting of v16i16 vectors into v8i16 vectors to prevent scalarization

Differential Revision: http://reviews.llvm.org/D18307

llvm-svn: 264512

Currently this is to mainly to prevent scalarization of integer division by constants.

Differential Revision: http://reviews.llvm.org/D18307

llvm-svn: 264511