Summary:
This fixes PR31105.

There is code trying to delete dead code that does so by e.g. checking if
the single predecessor of a block is the block itself.

That check fails on a block like this
 bb:
   br i1 undef, label %bb, label %bb
since that has two (identical) predecessors.

However, after the check for dead blocks there is a call to
ConstantFoldTerminator on the basic block, and that call simplifies the
block to
 bb:
   br label %bb

Therefore we now do the call to ConstantFoldTerminator before the check if
the block is dead, so it can realize that it really is.

The original behavior lead to the block not being removed, but it was
simplified as above, and then we did a call to
    Dest->replaceAllUsesWith(&*I);
with old and new being equal, and an assertion triggered.

Reviewers: chandlerc, fhahn

Reviewed By: fhahn

Subscribers: eraman, llvm-commits

Differential Revision: https://reviews.llvm.org/D51280

llvm-svn: 340820

Requested in post-commit review for rL339670

llvm-svn: 340819

Fix for the out-of-memory error when compiling SemaChecking.cpp
with GVNHoist and ubsan enabled. I've used a cache for inserted
CHIs to avoid excessive memory usage.

Differential Revision: https://reviews.llvm.org/D50323

llvm-svn: 340818

llvm-svn: 340817

llvm-svn: 340816

llvm-svn: 340815

Summary:
This change removes further cases where the profiling mode
implementation relied on dynamic memory allocation. We're using
thread-local aligned (uninitialized) memory instead, which we initialize
appropriately with placement new.

Addresses llvm.org/PR38577.

Reviewers: eizan, kpw

Subscribers: jfb, llvm-commits

Differential Revision: https://reviews.llvm.org/D51278

llvm-svn: 340814

This patch creates the shift mask and actual shift using the vXi16 vector shift ops.

Differential Revision: https://reviews.llvm.org/D51263

llvm-svn: 340813

Summary:
This change saves and restores the full flags register in x86_64 mode.
This makes running instrumented signal handlers safer, and avoids flags
set during the execution of the event handlers from polluting the
instrumented call's flags state.

Reviewers: kpw, eizan, jfb

Subscribers: llvm-commits

Differential Revision: https://reviews.llvm.org/D51277

llvm-svn: 340812

ompiling benchmark library (introduced in D50894) with the latest
bootstrapped Clang produces a lot of warnings, this issue was addressed
in the upstream patch I pushed earlier.

Upstream patch:
https://github.com/google/benchmark/commit/f85304e4e3a0e4e1bf15b91720df4a19e90b589f

`README.LLVM` notes were updated to reflect the latest changes.

Reviewed by: lebedev.ri

Differential Revision: https://reviews.llvm.org/D51342

llvm-svn: 340811

As discussed on D51263, we're better off using byte shifts to clear the upper bits on pre-SSE41 hardware.

llvm-svn: 340810

This patch pulls google/benchmark v1.4.1 into the LLVM tree so that any
project could use it for benchmark generation. A dummy benchmark is
added to `llvm/benchmarks/DummyYAML.cpp` to validate the correctness of
the build process.

The current version does not utilize LLVM LNT and LLVM CMake
infrastructure, but that might be sufficient for most users. Two
introduced CMake variables:

* `LLVM_INCLUDE_BENCHMARKS` (`ON` by default) generates benchmark
  targets
* `LLVM_BUILD_BENCHMARKS` (`OFF` by default) adds generated
  benchmark targets to the list of default LLVM targets (i.e. if `ON`
  benchmarks will be built upon standard build invocation, e.g. `ninja` or
  `make` with no specific targets)

List of modifications:

* `BENCHMARK_ENABLE_TESTING` is disabled
* `BENCHMARK_ENABLE_EXCEPTIONS` is disabled
* `BENCHMARK_ENABLE_INSTALL` is disabled
* `BENCHMARK_ENABLE_GTEST_TESTS` is disabled
* `BENCHMARK_DOWNLOAD_DEPENDENCIES` is disabled

Original discussion can be found here:
http://lists.llvm.org/pipermail/llvm-dev/2018-August/125023.html

Reviewed by: dberris, lebedev.ri

Subscribers: ilya-biryukov, ioeric, EricWF, lebedev.ri, srhines,
dschuff, mgorny, krytarowski, fedor.sergeev, mgrang, jfb, llvm-commits

Differential Revision: https://reviews.llvm.org/D50894

llvm-svn: 340809

llvm-svn: 340808

Summary:
Correct to use set like behaviour of AllocType.  Should check for
subset, not precise value.

Reviewers: theraven

Reviewed By: theraven

Subscribers: hiraditya, llvm-commits

Differential Revision: https://reviews.llvm.org/D50959

llvm-svn: 340807

Looking at the current implementation and algorithm description,
it does not seem we need to keep vector with all edges for
each cluster and can just remember the best one. This is NFC change.

Differential revision: https://reviews.llvm.org/D50609

llvm-svn: 340806

We add check for invalidation of iterators. The only operation we handle here
is the (copy) assignment.

Differential Revision: https://reviews.llvm.org/D32747

llvm-svn: 340805

This is https://bugs.llvm.org/show_bug.cgi?id=38625

LLD accept this: 

".stack (INFO) : {", 

but not this:

".stack address_expression (INFO) :"

The patch fixes it.

Differential revision: https://reviews.llvm.org/D51027

llvm-svn: 340804

-z global is a flag used on Android (see D49198).

Differential revision: https://reviews.llvm.org/D49374

llvm-svn: 340802

This check ensures that users of Abseil do not open namespace absl in their code, as that violates our compatibility guidelines.

AbseilMatcher.h written by Hugo Gonzalez.

Patch by Deanna Garcia!

llvm-svn: 340800

KTEST is a different instruction. All of this code uses KORTEST.

llvm-svn: 340799

This matches gcc and icc despite not being documented in the Intel Intrinsics Guide.

llvm-svn: 340798

[DAGCombiner][AMDGPU][Mips] Fold bitcast with volatile loads if the resulting load is legal for the target.

Summary:
I'm not sure if this patch is correct or if it needs more qualifying somehow. Bitcast shouldn't change the size of the load so it should be ok? We already do something similar for stores. We'll change the type of a volatile store if the resulting store is Legal or Custom. I'm not sure we should be allowing Custom there...

I was playing around with converting X86 atomic loads/stores(except seq_cst) into regular volatile loads and stores during lowering. This would allow some special RMW isel patterns in X86InstrCompiler.td to be removed. But there's some floating point patterns in there that didn't work because we don't fold (f64 (bitconvert (i64 volatile load))) or (f32 (bitconvert (i32 volatile load))).

Reviewers: efriedma, atanasyan, arsenm

Reviewed By: efriedma

Subscribers: jvesely, arsenm, sdardis, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, arichardson, jrtc27, atanasyan, jfb, llvm-commits

Differential Revision: https://reviews.llvm.org/D50491

llvm-svn: 340797

[InstCombine] Extend (add (sext x), cst) --> (sext (add x, cst')) and (add (zext x), cst) --> (zext (add x, cst')) to work for vectors

Differential Revision: https://reviews.llvm.org/D51236

llvm-svn: 340796

This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.

Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.

Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.

llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.

All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.

Phabricator Review: https://reviews.llvm.org/D50988

llvm-svn: 340795

This causes crashes due to the interleaved dbg.value intrinsics being
left at the end of basic blocks, causing the actual terminators (br,
etc) to be not where they should be (not at the end of the block),
leading to later crashes.

Further discussion on the original commit thread.

This reverts commit r340368.

llvm-svn: 340794

verify*() methods are intended to have no side-effects (unless we detect
broken MSSA, in which case they assert()), and all of the other verify
methods are wrapped by `#ifndef NDEBUG`.

llvm-svn: 340793

Make the DYLD_INSERT_LIBRARIES workaround for SIP more robut for the various configurations that bots are running

llvm-svn: 340792

Based on how it is executed, it may not have been yet created.

llvm-svn: 340791

llvm-svn: 340790

llvm-svn: 340789

llvm-svn: 340788

This lines up with the behavior of an existing transform where if both 
operands of the binop are shuffled, we allow moving the binop before the 
shuffle regardless of whether the shuffle changes the size of the vector.

llvm-svn: 340787

The new unit tests match the old ones, which will remain in tree until the
old RTDyldObjectLinkingLayer is removed.

llvm-svn: 340786

llvm-svn: 340785

Fix the issue of duplicating the call to `exp{,2}()` when it's nested in
`pow()`, as exposed by rL340462.

Differential revision: https://reviews.llvm.org/D51194

llvm-svn: 340784

We only use this set for `insert` and `count`, so a hashing container
seems better here.

llvm-svn: 340783

The code that generates the loop definition operand for phis
in the epilog and kernel is incorrect in some cases.

In the kernel, when a phi refers to another phi, the code that
updates PhiOp2 needs to include the stage difference between
the two phis.

In the epilog, the check for using the loop definition instead
of the phi definition uses the StageDiffAdj value (the difference
between the phi stage and the loop definition stage), but the
adjustment is not needed to determine if the current stage
contains an iteration with the loop definition.

Differential Revision: https://reviews.llvm.org/D51167

llvm-svn: 340782

Summary:
The new stackification backend generates the giant switch statement
used to translate instructions to their stackified forms. I did this
because it was more interesting than adding all the different vector
versions of the various SIMD instructions to the switch statment
manually.

Reviewers: aardappel, aheejin, dschuff

Subscribers: mgorny, sbc100, jgravelle-google, sunfish, jfb, llvm-commits

Differential Revision: https://reviews.llvm.org/D51318

llvm-svn: 340781

This patch removes the MSBuild warnings about options that
clang-cl ignores.  It also adds several additional fields to
the LLVM Configuration options page.  The first is that it
adds support for LLD!  To give the user flexibility though,
we don't want to force LLD to always-on, and if we're not
forcing LLD then we might as well not force clang-cl either.
So we add options that can enable or disable lld, clang-cl,
or any combination of the two.  Whenever one is disabled,
it falls back to the Microsoft equivalent.

Additionally, for each of clang-cl and lld-link, we add a new
configuration setting that allows Additional Options to be
passed for that specific tool only.  This is similar to the
C/C++ > Command Line > Additional Options entry box, but
it serves the use case where a user switches back and forth
between the toolsets in their vcxproj, but where cl.exe
won't accept some options that clang-cl will.  In this case
you can pass those options in the clang-cl additional options
and whenever clang-cl is disabled (or the other toolset is
selected entirely), those options won't get passed at all.

llvm-svn: 340780

llvm-svn: 340779