Implement a feature (-vector-unaligned-mem) to allow targets to
ignore alignment requirements for SIMD memory operands.  This
is useful on architectures like the AMD 10h that do not trap on
unaligned references if a status bit is twiddled at startup time.

llvm-svn: 93151

Remove target attribute break-sse-dep. Instead, do not fold load into sse partial update instructions unless optimizing for size.

llvm-svn: 91910

be non-optimal. To be precise, we should avoid folding loads if the instructions
only update part of the destination register, and the non-updated part is not
needed. e.g. cvtss2sd, sqrtss. Unfolding the load from these instructions breaks
the partial register dependency and it can improve performance. e.g.

movss (%rdi), %xmm0
cvtss2sd %xmm0, %xmm0

instead of
cvtss2sd (%rdi), %xmm0

An alternative method to break dependency is to clear the register first. e.g.
xorps %xmm0, %xmm0
cvtss2sd (%rdi), %xmm0

llvm-svn: 91672

X86 instruction tables.

Also (while I was at it) cleaned up the X86 tables, removing tabs and
80-line violations.

This patch was reviewed by Chris Lattner, but please let me know if
there are any problems.

* X86*.td
	Removed tabs and fixed 80-line violations

* X86Instr64bit.td
	(IRET, POPCNT, BT_, LSL, SWPGS, PUSH_S, POP_S, L_S, SMSW)
		Added
	(CALL, CMOV) Added qualifiers
	(JMP) Added PC-relative jump instruction
	(POPFQ/PUSHFQ) Added qualifiers; renamed PUSHFQ to indicate
		that it is 64-bit only (ambiguous since it has no
		REX prefix)
	(MOV) Added rr form going the other way, which is encoded
		differently
	(MOV) Changed immediates to offsets, which is more correct;
		also fixed MOV64o64a to have to a 64-bit offset
	(MOV) Fixed qualifiers
	(MOV) Added debug-register and condition-register moves
	(MOVZX) Added more forms
	(ADC, SUB, SBB, AND, OR, XOR) Added reverse forms, which
		(as with MOV) are encoded differently
	(ROL) Made REX.W required
	(BT) Uncommented mr form for disassembly only
	(CVT__2__) Added several missing non-intrinsic forms
	(LXADD, XCHG) Reordered operands to make more sense for
		MRMSrcMem
	(XCHG) Added register-to-register forms
	(XADD, CMPXCHG, XCHG) Added non-locked forms
* X86InstrSSE.td
	(CVTSS2SI, COMISS, CVTTPS2DQ, CVTPS2PD, CVTPD2PS, MOVQ)
		Added
* X86InstrFPStack.td
	(COM_FST0, COMP_FST0, COM_FI, COM_FIP, FFREE, FNCLEX, FNOP,
	 FXAM, FLDL2T, FLDL2E, FLDPI, FLDLG2, FLDLN2, F2XM1, FYL2X,
	 FPTAN, FPATAN, FXTRACT, FPREM1, FDECSTP, FINCSTP, FPREM,
	 FYL2XP1, FSINCOS, FRNDINT, FSCALE, FCOMPP, FXSAVE,
	 FXRSTOR)
		Added
	(FCOM, FCOMP) Added qualifiers
	(FSTENV, FSAVE, FSTSW) Fixed opcode names
	(FNSTSW) Added implicit register operand
* X86InstrInfo.td
	(opaque512mem) Added for FXSAVE/FXRSTOR
	(offset8, offset16, offset32, offset64) Added for MOV
	(NOOPW, IRET, POPCNT, IN, BTC, BTR, BTS, LSL, INVLPG, STR,
	 LTR, PUSHFS, PUSHGS, POPFS, POPGS, LDS, LSS, LES, LFS,
	 LGS, VERR, VERW, SGDT, SIDT, SLDT, LGDT, LIDT, LLDT,
	 LODSD, OUTSB, OUTSW, OUTSD, HLT, RSM, FNINIT, CLC, STC,
	 CLI, STI, CLD, STD, CMC, CLTS, XLAT, WRMSR, RDMSR, RDPMC,
	 SMSW, LMSW, CPUID, INVD, WBINVD, INVEPT, INVVPID, VMCALL,
	 VMCLEAR, VMLAUNCH, VMRESUME, VMPTRLD, VMPTRST, VMREAD,
	 VMWRITE, VMXOFF, VMXON) Added
	(NOOPL, POPF, POPFD, PUSHF, PUSHFD) Added qualifier
	(JO, JNO, JB, JAE, JE, JNE, JBE, JA, JS, JNS, JP, JNP, JL,
	 JGE, JLE, JG, JCXZ) Added 32-bit forms
	(MOV) Changed some immediate forms to offset forms
	(MOV) Added reversed reg-reg forms, which are encoded
		differently
	(MOV) Added debug-register and condition-register moves
	(CMOV) Added qualifiers
	(AND, OR, XOR, ADC, SUB, SBB) Added reverse forms, like MOV
	(BT) Uncommented memory-register forms for disassembler
	(MOVSX, MOVZX) Added forms
	(XCHG, LXADD) Made operand order make sense for MRMSrcMem
	(XCHG) Added register-register forms
	(XADD, CMPXCHG) Added unlocked forms
* X86InstrMMX.td
	(MMX_MOVD, MMV_MOVQ) Added forms
* X86InstrInfo.cpp: Changed PUSHFQ to PUSHFQ64 to reflect table
	change

* X86RegisterInfo.td: Added debug and condition register sets
* x86-64-pic-3.ll: Fixed testcase to reflect call qualifier
* peep-test-3.ll: Fixed testcase to reflect test qualifier
* cmov.ll: Fixed testcase to reflect cmov qualifier
* loop-blocks.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-11.ll: Fixed testcase to reflect call qualifier
* 2009-11-04-SubregCoalescingBug.ll: Fixed testcase to reflect call
  qualifier
* x86-64-pic-2.ll: Fixed testcase to reflect call qualifier
* live-out-reg-info.ll: Fixed testcase to reflect test qualifier
* tail-opts.ll: Fixed testcase to reflect call qualifiers
* x86-64-pic-10.ll: Fixed testcase to reflect call qualifier
* bss-pagealigned.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-1.ll: Fixed testcase to reflect call qualifier
* widen_load-1.ll: Fixed testcase to reflect call qualifier

llvm-svn: 91638

vector_shuffle (scalar_to_vector (i32 load (ptr + 4))), undef, <0, 0, 0, 0>
=>
vector_shuffle (v4i32 load ptr), undef, <1, 1, 1, 1>

iff ptr is 16-byte aligned (or can be made into 16-byte aligned).

llvm-svn: 90984

Thanks to Daniel Dunbar for fixing clang intrinsics:
  http://llvm.org/viewvc/llvm-project?view=rev&revision=89499

llvm-svn: 89500

broke the Clang testsuite.

llvm-svn: 89495

Also fixed the corresponding testcase, and the PALIGNR
  intrinsic (tested for correctness with llvm-gcc).

llvm-svn: 89491

llvm-svn: 89081

llvm-svn: 89076

llvm-svn: 89011

- Check memoperand alignment instead of checking stack alignment. Most load / store folding instructions are not referencing spill stack slots.
- Mark MOVUPSrm re-materializable.

llvm-svn: 88974

1. rename the movhp patfrag to movlhps, since thats what it actually matches
2. eliminate the bogus movhps load and store patterns, they were incorrect.  The load transforms are already handled (correctly) by shufps/unpack.
3. revert a recent test change to its correct form.

llvm-svn: 86415

of movhps as the constraint.  Changes optimizations so
update testcases as appropriate as well.

llvm-svn: 86360

bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.

llvm-svn: 85517

llvm-svn: 85379

llvm-svn: 84459

loads in order to reduce register pressure.

llvm-svn: 82470

All of these do not have patterns (they're for the
disassembler).

Many of the floating-point instructions will probably
be rolled into definitions that have patterns, and may
eventually be superseded by mdefs.  So I put them
together and left a comment.

llvm-svn: 81979

Intel documentation.

llvm-svn: 79554

Add patterns and instruction encoding information.
Add custom lowering to deal with hardwired return register of
uncertain type (xmm0).

llvm-svn: 79377

 - Used to mark fake instructions which don't correspond to an actual machine
   instruction (or are duplicates of a real instruction). This is to be used for
   "special cases" in the .td files, which should be ignored by things like the
   assembler and disassembler. We still need a good solution to handle pervasive
   duplication, like with the Int_ instructions.

 - Set the bit on fake "mov 0" style instructions, which allows turning an
   assembler matcher warning into a hard error.

 - -2 FIXMEs.

llvm-svn: 78731

llvm-svn: 78600

structure.

llvm-svn: 78581

classes for X86.

llvm-svn: 78524

bytes for F2 0F 38 and propagate. Add a FIXME for a set
of possibilities which correspond to intrinsics already used.

New test.

llvm-svn: 78508

llvm-svn: 77718

due to x86 encoding restrictions. This is currently off by default
because it may cause code quality regressions. This is for PR4572.

llvm-svn: 77565

to ptest instruction plus setcc. Revamp ptest instruction. Add test.

llvm-svn: 77407

to support vector arguments and scalar arguments correctly. Update
lowering and fix comment to refer to pinsr* instead of insertps.

llvm-svn: 76921

testcases to make sure it's being generated.

llvm-svn: 76843

handle with an SSE2 instruction.

llvm-svn: 73760

llvm-svn: 72987

decoding. Essentially, they both map to the same column in the "opcode
extensions for one- and two-byte opcodes" table in the x86 manual. The RawFrm
complicates decoding this.

Instead, use opcode 0x01, prefix 0x01, and form MRM1r. Then have the code
emitter special case these, a la [SML]FENCE.

llvm-svn: 72556

llvm-svn: 72535

llvm-svn: 72534

the Intel manual (screenshot) says it should be 0b11110110 (f6).  The existing
encoding causes a disassembly conflict with MMX_PAVGBrm, which really should be
0f e0."

Patch by Sean Callanan!

llvm-svn: 72508

llvm-svn: 72488

llvm-svn: 71582

llvm-svn: 70425